MTD 465 manual Attaching The Discharge Chute All Models, Attaching The Chipper Chute

Page 6

Discharge

Chute

Hopper

Assembly

Chipper

Chute

Figure 1

Attaching The Hopper Assembly (All Models)

•Remove six hex nuts and washers from the weld studs on the impeller housing. Do not remove the support plate. See Figure 2.

•Place hopper assembly into position in front of impeller housing, aligning holes in hopper assembly collar with weld studs.

Attaching The Discharge Chute (All Models)

•Remove the wing knobs from each side of the lower impeller housing. See Figure 3.

Hex Lock Nut

Spacer

Hex Bolt

Wing Knob

Discharge Chute

Figure 3

•Remove the hex lock nut, spacers, and hex bolt from the top of the impeller housing.

•Align the discharge chute in position on the discharge opening and insert hex bolt with spacer through hinge on discharge chute (spacers fit inside of hinges). See Figure 3.

•Place second spacer over hex bolt inside other hinge and secure with hex lock nut.

•Secure both sides of discharge chute to impeller housing using wing knobs previously removed.

Attaching The Chipper Chute

Impeller Housing

Impeller

(Select Models 462 Thru 465 Only)

Washer

Bracket

• Remove the three cupped washers and hex nuts

 

Hex Nut

 

from weld studs around the opening on the side of

 

the impeller housing. See Figure 4.

Hopper

 

 

• Remove the hex bolts, flat washers, and lock nuts

Bracket

 

from the two holes on the upper end of the support

 

 

 

Release

brace.

 

• Align the chipper chute over the weld studs, so the

 

Rod

 

 

slot in the bottom of the chute is facing down.

Weld Stud

Support

• Secure chipper chute with the three cupped

Hopper

Plate

washers (cupped side against the chipper chute)

 

and hex nuts previously removed. Do not tighten

Assembly

the nuts at this time.

 

 

Figure 2

 

• The chipper shredder was shipped with one end of

• Slide hopper assembly onto weld studs and replace

the support brace already secured to the lower

frame. Loosen but do not remove the bolts

washers and hex nuts. Do not tighten completely.

securing the brace to the frame.

• Lift hopper assembly up to impeller bracket

• Align the holes in the chute with the holes in the top

assembly and slide the release rod out slightly to

of the brace and attach brace to chipper chute with

hook the hopper bracket onto the rod. See Figure 2.

hardware previously removed. Tighten securely.

• Tighten the six hex nuts that secure hopper

• Tighten the bolts securing the support brace to the

assembly to impeller housing and also tighten the

frame.

hex nuts that secure hopper bracket to hopper

• Tighten the three nuts on the weld studs holding the

assembly.

 

 

chipper chute to the impeller housing.

 

 

NOTE: Engine is not shown for clarity in Figure 4.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents OPERATOR’S Manual Engine Information Table of ContentsFinding Model Number Calling Customer SupportImportant Safe Operation Practices TrainingPreparation Maintenance and Storage OperationRemoving Unit From Carton Disconnecting Spark Plug WireAssembling Your Chipper Shredder Loose Parts In Carton See FigureAttaching The Discharge Chute All Models Attaching The Chipper ChuteFrame. Loosen but do not remove the bolts Know Your Chipper Shredder Attaching The Bag All ModelsOperating Your Chipper Shredder Customer Responsibilities Using The Chipper ShredderMaintenance LubricationRemoving The Flail Screen Models 462 orAll Models Sharpening Or Replacing The Shredder Blade Storing Your Chipper ShredderTroubleshooting Problem Cause RemedyTWO Year Limited Warranty Page Part RÉF Pièce Description Page Page Page VENTE-APRÈS Service ET Garantie Sous Pièces Solution Possibles Causes Problème Turbine la dans ObjetSaison hors Remisage Lames des remplacement ou Aiguisage EntretienNiveau au moteur à d’huile niveau le Maintenez Lubrication Client du ResponsibilitésDéchiqueteuse/broyeuse la de Utilisation BROYEUSE-DÉCHIQUETEUSE LA DE Utilisation 4 Chapitre ’essence et d’huile PleinsSac du Installation Déchiquetage’éjection goulotte la de Installation Trémie la de InstallationBougie la de fil du Débranchement Remisage ET Entretien Utilisation Formation Sécurité DE Consignes 1 ChapitreMatières DES Table VENTE-APRÈS ServiceMoteur DU Renseignement Chapitre’UTILISATION Notice

465 specifications

The MTD 465 is a remarkable addition to the world of agricultural tractors, engineered for versatility, efficiency, and user-friendliness. Designed primarily for mid-sized farming operations, the MTD 465 combines power with innovative technology to support a wide range of farming tasks.

One of the main features of the MTD 465 is its robust engine. Powered by a reliable, high-torque diesel engine, this tractor offers outstanding performance, providing farmers with the strength needed for heavier tasks like plowing and towing. Its 65 horsepower capacity strikes a balance between power and fuel efficiency, allowing for extended work periods without frequent refueling stops.

The MTD 465 incorporates advanced hydraulic systems, enhancing its productivity and ease of use. With a high-capacity hydraulic pump, the tractor ensures that attachments and implements operate smoothly and efficiently. Farmers can easily switch between tasks, such as tilling, cultivating, and hauling, thanks to the responsive hydraulic controls.

Another noteworthy technology included in the MTD 465 is the intuitive transmission system. Equipped with a range of gear options, including both manual and automatic settings, it allows for seamless gear changes, enhancing maneuverability in the field. This system is designed to provide optimal torque at various speeds, making it suitable for both slow precision work and faster tasks.

The tractor's ergonomic design contributes to operator comfort during long hours in the fields. With an adjustable seat, easy-to-reach controls, and excellent visibility from the cab, farmers can work efficiently while reducing fatigue. Additionally, the MTD 465 features enhanced safety measures, including protective structures and advanced lighting systems, ensuring safe operation in various conditions.

Maintenance is simplified with the MTD 465, thanks to accessible components and user-friendly service intervals. Farmers can perform routine checks and minor repairs with ease, ensuring that the tractor remains in peak operating condition without excessive downtime.

In conclusion, the MTD 465 tractor stands out for its powerful performance, innovative technologies, and user-centered design. With its versatility and durability, it proves to be an invaluable asset for farmers looking to maximize productivity and efficiency in their agricultural operations. Whether handling heavy-duty tasks or intricate farming activities, the MTD 465 is a reliable partner in modern farming.
Top Page Image Contents