MTD i1046, i1050 Steering the Tractor, Driving On Slopes, Moving the Tractor Manually, Mowing

Page 15

Steering the Tractor

Your i1000 series tractor is equipped with an innovative steering design which is somewhat different from that of the traditional steering wheel type lawn tractor. Turning the steering wheel not only turns the front wheels, but also controls the drive linkage of the two hydro transmis- sions that drive the tractor. This feature allows you to vary the radius of turns from a normal wide turn down to a zero turn. Some practice may be required to become accustomed to the steering of your tractor. The steering works as follows:

•The steering wheel turns approximately two turns stop to stop. With the center position being the straight ahead position.

•Minor turns of the steering wheel from the center position (up to approx. 10º) will turn only the front axles and result in wider turns.

•Increasing the turn of the steering wheel (beyond 10°) results in increasingly tighter turns. As the steering mechanism turns the front wheels, it also changes the position of the transmission drive linkage to slow down the inner rear wheel in the turn and adjust the speed of the outer wheel as necessary to complete the desired turn. Turn the steering wheel back to the center position as the turn is completed.

NOTE: It is not necessary to release the drive pedal when making a turn. The change to the transmission linkage occurs regardless of how far the drive pedal is depressed. When the steering wheel is straightened, the tractor will return to the speed set by the drive pedal.

•Turning the steering wheel fully to its stop in either direction will fully turn the front wheels, reverse the direction of the inner wheel and adjust the outer wheel speed to execute a zero turn in the chosen direction. Turn the steering wheel back to the center position as the turn is completed.

NOTE: As the steering wheel is turned further toward its stop, the effort needed to turn the steering wheel increases.

IMPORTANT: Making tight or zero turns on grass will greatly increase the potential for defacement of the turf.

Driving On Slopes

IMPORTANT: Refer to the SLOPE GAUGE on page 3 to help determine slopes where you may operate the tractor safely.

•Mow up and down slopes, never across.

•Watch for holes, ruts, bumps, rocks, or other hidden objects. Uneven terrain could overturn the machine. Tall grass can hide obstacles.

•Avoid turns when driving on a slope. If a turn must be made, turn downhill on the slope. Turning uphill increases the possibility of a tractor rollover.

•Avoid stopping when driving up a slope. If it is neces- sary to stop while driving up a slope, start up smoothly and carefully to reduce the possibility of flipping the tractor over backward.

Moving the Tractor Manually

If for any reason the tractor will not drive or you wish to move the tractor, engage the two hydro transmission bypass rods to manually move the tractor short distances.

IMPORTANT: Never tow or drag the tractor with the rear wheels on the ground. Even with the bypass rods engaged.

Doing so will damage the transmissions.

To engage a bypass rod, pull the rod rearward through the slot until the offset form the rod is outside the hitch plate. Then turn the rod in either direction and release so that the offset is locked against the hitch plate. Engage both bypass rods to manually move the tractor. See Figure 8.

Bypass Rods

Disengaged

Offset Form Locked Against

Hitch Plate to Engage

Figure 8

To disengage, turn the rod to align with the slot and release the rod back through the hitch plate.

NOTE: The transmission will NOT engage when the hydrostatic bypass rod is pulled out. Return the rod to its

normal position prior to operating the tractor.

Mowing

WARNING: To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

This tractor is equipped with one of Cub Cadet’s high quality cutting decks. The following information will be helpful when using the cutting deck with your tractor.

•Do not mow at high ground speed, especially if a mulch kit or grass collector is installed.

•For best results it is recommended that the first two laps be cut with the discharge thrown towards the center. After the first two laps, reverse the direction to throw the discharge to the outside for the balance of cutting. This will give a better appearance to the lawn.

•Do not cut the grass too short. Short grass invites weed growth and yellows quickly in dry weather.

•Mowing should always be done with the engine at full throttle.

4

Operation

WARNING

To help avoid blade contact or a thrown object injury, keep bystanders, helpers, children and pets at least 75 feet from the machine while it is in operation. Stop machine if anyone enters the area.

IMPORTANT

Refer to the SLOPE GAUGE on page 3 to help determine slopes where you may operate the tractor safely. Never attempt to move the tractor manually without first engaging the relief valve. Doing so may damage the tractor’s transmission.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents OPERATOR’S Manual Table of Contents — Slope GaugeOperation Safe Operation PracticesYour Responsibility ChildrenGeneral Operation Never allow children or others in or on towed equip- ment Do NotService Mulching Plug and Shipping Brace Removal Attaching the Battery CablesOpening the Tractor Hood Gas and Oil Fill-upTire Pressure Throwing objects. Never operateIts down position, even with Know the Controls Throttle Control Lever PTO Blade Engage Control SwitchKey Switch Module 12V Power OutletCup Holder Systems Indicator Monitor/Hour MeterSeat Adjustment Lever Deck Lift LeverHydro Transmission Bypass Rods Safety Interlock SystemReverse Caution Mode Cargo NetIf the blades are engaged, disengage the PTO Starting the EngineStopping the Engine Driving The TractorMowing Steering the TractorDriving On Slopes Moving the Tractor ManuallyRaise and hold the chute deflector in up position Installing Mulching Plug on 46 Decks onlyInstalling Mulching Plug on 50 Decks only MulchingMaking Adjustments MakingLeveling the Deck Deck Gauge Wheel Adjustment Front To Rear LevelingSee Figure Deck only Deck Rear Roller AdjustmentOperating Maintaining Your Lawn TractorChanging Engine Oil & Filter Checking Engine Oil LevelServicing Paper Element Air CleanerServicing the Precleaner Spark PlugsFuel Line Steering MaintenanceEngine Cooling CarburetorCleaning the Tractor and Deck LubricationDeck Wash System Battery TiresCutting Deck Removal Hex Flange Nut Spindle AssemblyCutting Blades Blades may be removed as followsFuses Reinstalling the Cutting DeckHydrostatic Transmission Changing the Deck BeltMower Deck Maintaining Your Tractor Attachments & Accessories Off-Season StorageDrain fuel only into an approved container Safety Labels Trouble Shooting Debris in steering gears Clean gearsSteering effort Lack of Lubrication ArmsTo order replacement Description ModelOr visit MANUFACTURER’S Warranty Coverage General Emissions Warranty Coverage U.S.A

i1046, i1050 specifications

The MTD i1046 and i1050 are notable additions to the MTD lineup, designed specifically for efficiency and ease of use in various landscaping tasks. These versatile machines are engineered to handle a range of applications, making them ideal for both residential and commercial users.

The MTD i1046 is equipped with a robust 18 HP engine, providing ample power for tackling tough mowing jobs. Its 46-inch cutting deck is designed for enhanced maneuverability, allowing users to navigate tight spots and corners with ease. The deck also features a mulching capability, which helps to naturally fertilize lawns while reducing the need for bagging clippings. Additionally, the i1046 boasts an automatic transmission that adjusts speed seamlessly, providing an intuitive driving experience for operators of all skill levels.

On the other hand, the MTD i1050 takes things a step further with a more powerful 22 HP engine. Its expansive 50-inch cutting deck allows for greater acreage coverage, making it an excellent choice for larger lawns. The i1050 also incorporates a high-back seat, enhancing comfort during extended mowing sessions. This model is designed with a heavy-duty frame and durable chassis, ensuring long-lasting performance even in challenging conditions.

Both models feature advanced technologies that enhance their usability. The Easy Select Deck Height Adjustment system allows users to customize cutting heights with simple adjustments, ensuring optimal grass length for diverse lawn types. The ergonomic steering wheel design provides an improved grip and reduces operator fatigue, enhancing overall comfort during operation.

In terms of safety, MTD has integrated a range of features across both models. The Rollover Protection Structure (ROPS) keeps operators safe in the event of uneven terrain, while the automatic blade stop ensures that the blades cease operation whenever the rider leaves the seat, preventing accidental injuries.

Furthermore, the i1046 and i1050 are designed with easy maintenance in mind. The accessible engine compartment allows straightforward engine checks, and the deck design enables hassle-free cleaning, which is essential for maintaining optimal performance.

In summary, the MTD i1046 and i1050 deliver a powerful and efficient solution for landscaping needs. With their strong engines, user-friendly features, and safety technologies, these models are poised to satisfy both professional landscapers and homeowners alike. Their sturdy design ensures reliability and performance, making them valuable assets for keeping lawns looking pristine.
Top Page Image Contents