MTD i1046, i1050 warranty MANUFACTURER’S Warranty Coverage

Page 34

KOHLER CO.

FEDERAL AND CALIFORNIA EMISSION CONTROL SYSTEMS

LIMITED WARRANTY

UTILITY AND LAWN AND GARDEN ENGINES

The U.S. Environmental Protection Agency (EPA), the California Air Resources Board (CARB), and Kohler Co. are pleased to explain the Federal and California Emission Control Systems Warranty on your small off-road equipment engine. For California, engines produced in 1995 and later must be designed, built and equipped to meet the state’s stringent anti-smog standards. In other states, 1997 and later model year engines must be designed, built and equipped, to meet the U.S. EPA regulations for small non-road engines. The engine must be free from defects in materials and workmanship which cause it to fail to conform with U.S. EPA standards for the first two years of engine use from the date of sale to the ultimate purchaser. Kohler Co. must warrant the emission control system on the engine for the period of time listed above, provided there has been no abuse, neglect or improper maintenance.

The emission control system may include parts such as the carburetor or fuel injection system, the ignition system, and catalytic converter. Also included are the hoses, belts and connectors and other emission related assemblies.

Where a warrantable condition exists, Kohler Co. will repair the engine at no cost, including diagnosis (if the diagnostic work is performed at an authorized dealer), parts and labor.

MANUFACTURER’S WARRANTY COVERAGE

Engines produced in 1995 or later are warranted for two years in California. In other states, 1997 and later model year engines are warranted for two years. if any emission related part on the engine is defective, the part will be repaired or replaced by Kohler Co. free of charge.

OWNER’S WARRANTY RESPONSIBILITIES

(a ) The engine owner is responsible for the performance of the required maintenance listed in the owner’s manual. Kohler Co. recommends that you retain all receipts covering maintenance on the engine. But Kohler Co. cannot deny warranty solely for the lack of receipts or for your failure to assure that all scheduled maintenance was performed.

(b)Be aware, however, that Kohler Co. may deny warranty coverage if the engine or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

(c)For warranty repairs, the engine must be presented to a Kohler Co. service center as soon as a problem exists. Call 1-800-544-2444, or access our web site at: www.kohlerengines.com, for the names of the nearest service centers. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding warranty rights and responsibilities, you should contact Kohler Co. at 1-920-457-4441 and ask for an Engine Service representative.

COVERAGE

Kohler Co. warrants to the ultimate purchaser and each subsequent purchaser that the engine will be designed, built and equipped, at the time of sale, to meet all appli- cable regulations. Kohler Co. also warrants to the initial purchaser and each subsequent purchaser, that the engine is free from defects in material and workmanship which cause the engine to fail to conform with applicable regulations for a period of two years.

Engines produced in 1995 or later are warranted for two years in California. For 1997 and later model years, EPA requires manufacturers to warrant engines for two years in all other states. These warranty periods will be begin on the date the engine is purchased by the initial purchaser. If any emission related part on the engine is defective, the part will be replaced by Kohler Co. at no cost to the owner. Kohler Co. is liable for damages to other engine components caused by the failure of a warranted part still under warranty.

Kohler Co. shall remedy warranty defects at any authorized Kohler Co. engine dealer or warranty station. Warranty repair work done at an authorized dealer or warranty station shall be free of charge to the owner if such work determines that a warranted part is defective.

Listed below are the parts covered by the Federal and California Emission Control Systems Warranty. Some parts listed below may require scheduled maintenance and are warranted up to the first scheduled replacement point for that part. The warranted parts are:

•

Oxygen sensor (if equipped)

•

Ignition module(s) with high tension lead

•

Intake manifold (if equipped)

•

Gaseous fuel regulator (if equipped)

•

Exhaust manifold (if equipped)

•

Electronic control unit (if equipped)

•

Catalytic muffler (if equipped)

•

Carburetor or fuel injection system

•

Fuel metering valve (if equipped)

•

Fuel lines (if equipped)

•

Spark advance module (if equipped)

• Air filter, fuel filter, and spark plugs (only to first scheduled replacement point)

LIMITATIONS

This Emission Control System Warranty shall not cover any of the following:

(a)repair or replacement required because of misuse or neglect, improper maintenance, repairs improperly performed or replacements not conforming to Kohler Co. specifications that adversely affect performance and/or durability and alterations or modifications not recommended or approved in writing by Kohler Co.,

(b)replacement of parts and other services and adjustments necessary for required maintenance at and after the first scheduled replacement point,

(c)consequential damages such as loss of time, inconvenience, loss of use of the engine or equipment, etc.,

(d)diagnosis and inspection fees that do not result in eligible warranty service being performed, and(e)any add-on or modified part, or malfunction of authorized parts due to the use of add-on or modified parts.

MAINTENANCE AND REPAIRS REQUIREMENTS

The owner is responsible for the proper use and maintenance of the engine. Kohler Co. recommends that all receipts and records covering the performance of regular maintenance be retained in case questions arise. If the engine is resold during the warranty period, the maintenance records should be transferred to each subsequent owner. Kohler Co. reserves the right to deny warranty coverage if the engine has not been properly maintained; however, Kohler Co. may not deny warranty repairs solely because of the lack of repair maintenance or failure to keep maintenance records.

Normal maintenance, replacement or repair of emission control devices and systems may be performed by any repair establishment or individual; however, warranty repair must be performed by a Kohler authorized service center. Any replacement part or service that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the engine manufacturer.

Page 33 Page 35
Image 34
Page 33 Page 35
Contents OPERATOR’S Manual Table of Contents Slope Gauge —Children Safe Operation PracticesYour Responsibility OperationGeneral Operation Do Not Never allow children or others in or on towed equip- mentService Gas and Oil Fill-up Attaching the Battery CablesOpening the Tractor Hood Mulching Plug and Shipping Brace RemovalThrowing objects. Never operate Tire PressureIts down position, even with Know the Controls 12V Power Outlet Control SwitchKey Switch Module Throttle Control Lever PTO Blade EngageDeck Lift Lever Systems Indicator Monitor/Hour MeterSeat Adjustment Lever Cup HolderCargo Net Safety Interlock SystemReverse Caution Mode Hydro Transmission Bypass RodsDriving The Tractor Starting the EngineStopping the Engine If the blades are engaged, disengage the PTOMoving the Tractor Manually Steering the TractorDriving On Slopes MowingMulching Installing Mulching Plug on 46 Decks onlyInstalling Mulching Plug on 50 Decks only Raise and hold the chute deflector in up positionMaking Making AdjustmentsLeveling the Deck Front To Rear Leveling Deck Gauge Wheel AdjustmentSee Figure Deck Rear Roller Adjustment Deck onlyChecking Engine Oil Level Maintaining Your Lawn TractorChanging Engine Oil & Filter OperatingSpark Plugs Air CleanerServicing the Precleaner Servicing Paper ElementCarburetor Steering MaintenanceEngine Cooling Fuel LineLubrication Cleaning the Tractor and DeckDeck Wash System Tires BatteryCutting Deck Removal Blades may be removed as follows Spindle AssemblyCutting Blades Hex Flange NutChanging the Deck Belt Reinstalling the Cutting DeckHydrostatic Transmission FusesMower Deck Maintaining Your Tractor Off-Season Storage Attachments & AccessoriesDrain fuel only into an approved container Safety Labels Trouble Shooting Arms Clean gearsSteering effort Lack of Lubrication Debris in steering gearsDescription Model To order replacementOr visit MANUFACTURER’S Warranty Coverage General Emissions Warranty Coverage U.S.A

i1046, i1050 specifications

The MTD i1046 and i1050 are notable additions to the MTD lineup, designed specifically for efficiency and ease of use in various landscaping tasks. These versatile machines are engineered to handle a range of applications, making them ideal for both residential and commercial users.

The MTD i1046 is equipped with a robust 18 HP engine, providing ample power for tackling tough mowing jobs. Its 46-inch cutting deck is designed for enhanced maneuverability, allowing users to navigate tight spots and corners with ease. The deck also features a mulching capability, which helps to naturally fertilize lawns while reducing the need for bagging clippings. Additionally, the i1046 boasts an automatic transmission that adjusts speed seamlessly, providing an intuitive driving experience for operators of all skill levels.

On the other hand, the MTD i1050 takes things a step further with a more powerful 22 HP engine. Its expansive 50-inch cutting deck allows for greater acreage coverage, making it an excellent choice for larger lawns. The i1050 also incorporates a high-back seat, enhancing comfort during extended mowing sessions. This model is designed with a heavy-duty frame and durable chassis, ensuring long-lasting performance even in challenging conditions.

Both models feature advanced technologies that enhance their usability. The Easy Select Deck Height Adjustment system allows users to customize cutting heights with simple adjustments, ensuring optimal grass length for diverse lawn types. The ergonomic steering wheel design provides an improved grip and reduces operator fatigue, enhancing overall comfort during operation.

In terms of safety, MTD has integrated a range of features across both models. The Rollover Protection Structure (ROPS) keeps operators safe in the event of uneven terrain, while the automatic blade stop ensures that the blades cease operation whenever the rider leaves the seat, preventing accidental injuries.

Furthermore, the i1046 and i1050 are designed with easy maintenance in mind. The accessible engine compartment allows straightforward engine checks, and the deck design enables hassle-free cleaning, which is essential for maintaining optimal performance.

In summary, the MTD i1046 and i1050 deliver a powerful and efficient solution for landscaping needs. With their strong engines, user-friendly features, and safety technologies, these models are poised to satisfy both professional landscapers and homeowners alike. Their sturdy design ensures reliability and performance, making them valuable assets for keeping lawns looking pristine.
Top Page Image Contents