Marathon F200060 manual Safety Summary, Connections

Page 6

Safety Summary

All cautions and instructions that appear in this manual must be complied with to prevent personnel injury or damage to the Probe Transmitter or connected equipment. The specified limits of this equipment must not be exceeded. If these limits are exceeded or if this instrument is used in a manner not intended by Marathon Sensors Inc., damage to this instrument or connected devices could occur.

Do not connect this device directly to AC motors, valves, or other actuators. All AC alarm functions must be connected through an interposing DC coil relay with a maximum coil load of 0.5 amps DC. The Probe Transmitter is not rated to act as a safety device. It should not be used to provide interlocking safety functions for any temperature or process functions. Alarm capabilities are provided for probe test and input faults only and are not to be considered or used as safety contacts in any application.

Connections

The Probe Transmitter has four removable terminal blocks grouped with four terminals each. Each terminal is a wire clamp type with a standard slot screw. Each clamp can accommodate AWG 24 to 12 flexible stranded wire. Maximum torque on the terminal screws should not exceed 0.8 Nm.

The figure below shows the arrangement of the terminals.

1 2 3 4

-+

EVT EVT

AO1 COM NO LOWER

5 6

-+

TC

7 8

-+

MV

UPPER

UPPER

9 10 11 12

-+

RS485

-+

24VDC

LOWER

13 14 15 16

-+ N/C N/C

AO2

Figure 2 Terminal Layout

Page 3 of 23

11/14/2006

Rev. 14

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Marathon Sensors Inc Oxymit Transmitter Operators ManualCopyright Marathon Sensors INC Table of Contents Typical Oxygen Transmitter Calibration F840030 Typical Carbon Transmitter CalibrationF840031 Block Diagram General DescriptionSafety Summary ConnectionsParameter Selections Grounding and ShieldingProcess Parameters Carbon Process Factor Parameter Name Selection Units or Options Range DefaultProcess Type Dew Point Process FactorOxygen Exponent TC TypeAnalog Output Channels Calibration Percent Carbon Process Variable CalculationsPercent Oxygen DewpointCommunications ModbusRTU Framing Function Field Error Check Field CRCAddress Field Data FieldCRC Memory Map LOW Byte Cold Junction Trim LOW Byte Input EventUpper Byte Load Line High Byte Host AddressBits 8 12 Redox Metal Number Bits 0 4 Oxygen ExponentBits 5 6 Display Decimal Place LOW BYTE, Analog OutputAOUTRN1 Analog Output 1 Range READ/WRITE HEX DEC Block Parameter Description READ/WRITEHigh BYTE, Analog Output AOUTOF2 Analog Output 2 Offset READ/WRITEBlock HEX DEC Parameter Description READ/WRITE Mvfil Temp Measured Temperature Read onlySpare READ/WRITE Tempfil Coldjct Cold Junction Read onlySpare Operational Specifications Percent oxygen 20.9% default800 3000 Address 1 is default Certifications and Compliance PendingImmunity as specified by EN Emissions as specified by EN

F200060 specifications

The Marathon F200060 is a high-performance electric skateboard that has rapidly gained recognition among both enthusiasts and casual riders alike. Combining cutting-edge technology with robust design, this skateboard is engineered to deliver an exhilarating riding experience.

One of the standout features of the Marathon F200060 is its powerful motor system. The skateboard is equipped with a dual-motor setup that offers impressive torque and acceleration, allowing riders to reach a top speed of up to 25 miles per hour. This feature makes it suitable for both commuting and leisurely rides, ensuring a thrilling experience on every journey. The motor system is also designed to be energy-efficient, offering extended battery life and reducing the need for frequent recharging.

Speaking of battery life, the Marathon F200060 boasts a high-capacity lithium-ion battery that can provide a range of up to 20 miles on a single charge. This feature is particularly beneficial for urban commuters, enabling them to travel long distances without the anxiety of running out of power. Additionally, the skateboard supports fast charging technology, allowing riders to recharge the battery in a matter of hours.

The construction of the F200060 is another aspect that sets it apart from its competitors. It features a sturdy, lightweight deck made from high-quality materials, providing both durability and stability. The skateboard's design includes high-grade wheels and advanced shock absorption systems that enhance ride comfort, making it effective for both smooth pavements and rough urban terrains.

In terms of safety, the Marathon F200060 is equipped with integrated LED lights that improve visibility during night rides. The skateboard also features advanced braking systems that allow for smooth and controlled stops, ensuring rider safety on all terrains.

Finally, the F200060 comes with smart technology integration, including Bluetooth connectivity that allows riders to connect their smartphones. Users can monitor battery life, customize settings, and even track their riding statistics through a dedicated app. This integration enhances the overall user experience and provides valuable data to help riders optimize their performance.

In summary, the Marathon F200060 electric skateboard embodies a blend of power, efficiency, safety, and smart technology, making it an excellent choice for anyone looking to elevate their ride. Its performance features and innovative design cater to the needs of modern riders, ensuring countless hours of enjoyment on the road.
Top Page Image Contents