Krell Industries KPS-30i manual Complete Transport Features and Functions

Page 9

COMPLETE TRANSPORT FEATURES AND FUNCTIONS

The KPS-30i has a wide variety of transport functions. Listed below are the functions which can be accessed from the front panel and/or the remote control.

STOP: Stops the disc while playing.

PLAY: Starts the disc playing from track 1 or from a keypad-selected track.

Also, begins playback of a programmed track sequence. Pressing the Play button during a track will start that track again from the beginnir~g.

I<: TRACKBACK/SEARCHBACK. A single press of the button selects and begins playing the track previous to the current track. A sustained press of the buttons scrolls backward through current track.

>[: TRACK FORWARD/SEARCH FORWARD. A single press of the button selects and begins playing the track after the current track. A sustained press of the button scrolls forward through current track.

PAUSE:Temporarily suspends play of current track. Second press of the Pause button resumes play at the point Pause was engaged.

REPEAT:(remote control only) When pressed once, will continuously repeat the current track. When pressed twice, repeats the entire disc or track program

indefinitely. Press Stop or Repeat a third time to cancel this function. When

selecting the desired Repeat function, press the Repeat button once and REPEAT1 will appear in the display window. Press the Repeat button twice and REPEATwill appear in the display window.

DIRECT NUMBER ACCESS KEYPAD: The Direct Number Access Keypad

makes track selection quick and easy. When using ttie direct track access function, the selected track will begin play immediately after a one or two digit

number is selected. Key in the desired track number. Tracks consisting of two

digits must be keyed within 2 seconds of each other. NOT POSSIBLE will appear in the display if a non-existent track is selected.

SHUFFLE:(remote

control

only).

Will play tracks in

a random order. Press the

Shuffle

button

and the disc

will begin play in a sequence other than the

original.

Press

Shuffle

again

to

resume

normal play.

 

Press

I << to

play a

previously

played

track.

¯ ~

Press >> [ to play the next randomly selected track.

SCAN: (remote control only). When pressed, SCANappears in the display and the first 10 seconds of each track are played. Ten seconds are counted down for each track in the display window. Press Play or Scan a second time to resume normal play.

8

Image 9
Contents Krell Playback System Table of Contents Introduction Page Placement Unpacking and PlacementGeneral Description of KPS-30i Owners Reference AC Power GuidelinesKPS-30i KPS-30i Basic Operation Complete Transport Features and Functions KPS-30i Programming HOW to Write a ProgramAnalog Output Connections KPS-30i Input and Output DetailsRemote Control Remote Control OperationBattery Installation Removal 000 Questions Answers Page KPS-30i Typical System Setup Unit SpecificationsShipping Unit Only