Krell Industries KPS-30i manual Remote Control Operation, Battery Installation Removal

REMOTE CONTROL

REMOTE CONTROL OPERATION

The KPS-30i comes equipped with a remote contrgl from which processor

and basic transport functions can be controlled. A brief description of the buttons and their functions is provided. An optional remote control is available

that includes additional functions for KRELL preamplifiers and power amplifiers.

BATTERY INSTALLATION		AND REMOVAL
NOTE: Batteries	should	be replaced	when functions	from	the	remote control
become intermittent.	The KPS-30i remote		uses two AAAsize	1.5	volt	batteries.

1.Removethe back plate to expose the batteries.

2.Removethe old batteries.

3.To insure optimal conductivity, clean the metal contacts.

4.Install new batteries, following the battery position diagram on the plastic battery receptacle.

5.Re-install the back plate.

6.Check to make sure the remote control is functioning properly.

If you have questions about the remote control operation contact the KRELL staff for assistance.

12