KPS-30i PROGRAMMING
PROGRAM:(front panel only) Track programming gives you the ability to select which tracks you would like to hear and the order in which you would like to hear them. This method of programming is short term and will be cleared when you press the Stop button twice or the Clear button. Once'a program is written, basic functions like Pause, Repeat, Track forward, and Track Back work within the program. A maximumof thirty tracks can be stored in a program sequence.
NOTE: FULL appears in the display if the thirty track maximum is exceeded.
NOT POSSIBLE appears in the display if a
HOW TO WRITE A PROGRAM
1.Press Program on the front of the
2.Key in the desired track sequence. Tracks consisting of two digits must be keyed within two seconds of each other. The number of tracks and total playing time of the programmed sequence will appear in the display window.
Track numbers will appear in the display as they are stored within a programmed sequence.
3.Press Program to exit Program mode.
4.Press Play to. begin playback of the programmed sequence.
5.Press the Stop button twice or the Clear button to erase a programmed sequence.
NOTE: While playing a programmed sequence, the Track Forward, Track Back, Repeat and Pause functions work within the program.
9