Multiquip BG113BC General Information, Balloon Envelopes, Alarm Buzzer, Machine Safety Decals

Page 15

GENERAL INFORMATION

The Multiquip GloBug Lighting System is a general purpose floodlight tower intended for emergency and remote lighting conditions. The GloBug can be powered by a variety of Multiquip's series generators.Power requirements for running the GloBug are 120 VAC, 60 Hz @ 9.6 amps. The GloBug can be powered by any MQ portable generator with an output of 2.9 kW or greater.

Please read carefully the specified generator manual that will accompany your GloBug lighting system. This manual will explain how to operate and maintain the generator.

All information related to the generator will be referenced in a

NOTEseparate (supplied) "Operation and Parts Manual". Operation andmaintenanceofthegenerator will not be referenced in this manual.

The lighting system can be raised vertically in excess of 14.58 feet (4.44 meters) by means of a manual winch. The tower tensioning system is designed to provide the necessary tension to safely control the pivot of the tower.Outriggers must always be deployed prior to raising the mast.

DANGER - GloBug Overhead Obstructions

ALWAYS make sure the area above GloBug is open and clear of

overhead power lines and other obstructions.

The tower extends in excess of 14.58 ft. (4.44 meters). Contact with overhead powerlines or other obstructions could result in equipment

damage, Serious Injury or Death!

The lighting system of Multiquip's GloBug Lighting System is comprised of one "Metal Halide" 1000 watt lamp. This lamp has an output of 112,000 lumens. Typical lighting coverage is in excess 150 ft. (45.72 meters) in a 360 degree pattern.

Located underneath the generator support platform is a weather resistant ballast box that contains the ballast for starting the floodlight. The floodlight is activated by an ON/OFF switch located at the base of the mast.

For ease of service or transport, the floodlight is equipped with a quick-disconnect connector that allows the lamp fixture to be removed quickly.This feature is extremely useful during transport of the lighting system over rough terrain. It is always best to remove the floodlight and pack it safely so it will not be damaged.

Balloon Envelopes

The GloBug can be configured with a variety of balloon envelopes (canopy). Please contact the MQ sales department for the balloon of your choice.The GloBug, Model GB113BC is shipped from the factory with the drum type balloon.

Alarm Buzzer

The GloBug is equipped with a "Balloon Alarm" feature.This alarm will sound if the lamp is on and the balloon attempts to make contact with the hot! surface of the lamp . This alarm is intended to inform the operator that a potential burn hazard exits between the lamp surface and the balloon material.

Always allow the lamp to cool down before removing the AC power from the GloBug. In the event the balloon begins to deflate during normal operation, immediately place the GloBug's ON/OFF switch in the OFF position.

Machine Safety Decals

The GloBug is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. The decal illustrations shown in the parts section of this manual show the decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer.

GB113BC GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #5 (01/16/12) — PAGE 15

Image 15
Contents Model GB113BC Proposition 65 Warning Page Table of Contents Ordering parts has never been easier Parts Ordering Proceduresfire extinguisher Safety InformationResult in injury to yourself and others „ Always know the location of the nearest„ Never unplug the lamp’s AC power cable during operation „ Never attempt service on a running machine„ Always make sure the area above Generator SafetyLoading and Unloading Specifications SpecificationsTOP View Side View Stow Position Rear View DimensionsBased on 360glare-free coverage Floodlight Footcandle PlotFloodlight Footcandle Plot BAL120R-Reflector-Shaped Balloon Floodlight Footcandle Plot BAL-115D-Drum Shaped Balloon Balloon Envelopes Alarm BuzzerMachine Safety Decals General InformationMajor Components ComponentsComponents GloBug Setup SetupPositioning the Balloon Shutdown SETUP/OPERATIONApplying Power Place the power ON/OFF switch in the OFF positionStorage ShutdownZip MaintenanceInstalling a New Lamp Reconnect the power cablesRemoving the Lamp/Balloon Assembly Removal of WinchRemoving the Lamp Cable Cable Release Access Point Route the cable around the pulley of the first mast a Installation of Winch CableInstallation of Winch Cutoff any excess zip tie materialBallast Box Removal Balloon/Lamp Placement Wiring Diagram Maintenance Wiring DiagramM1 C6 Periodic Check and Maintenance Troubleshooting Lamps Troubleshooting Mast Xxxxx only Not Used on Explanation of Codes in the Remarks ColumnBalloon Cloth Suggested Spare PartsQty Description BulbLamp Cover Buzzer Nameplate and DecalsDECALWARNING, Lift Hanger Nameplate and DecalsDecal Caution Cover Information Decal Caution Lamp Cover BuzzerHandle Assy Handle AssyBase Plate Handle Grip Includes Item WSnap Ring Sleeve Bearing 30DX34DX20Steering Assy Brake Pedal Steering AssyFront Shaft L Front Shaft ROutrigger Assy Outrigger AssySpacer OUT,R Includes Item W Weight OUT,R RWeight OUT,R L Bracket OUT,R RMast Adapter Assy Mast Adapter AssyWasher StandShaft Stand Spacer StandMain Mast Assy Main Mast AssyFirst Mast Switch AssyScrew & WASHER, M5X8 Winch HM-G103Winch Assy Winch AssyBOLT, M8X15 FrameDrum Shaft WASHER, Lock M8Mast Section Assy Mast Section AssyThird Mast Second MastBaseplate Cover Assy Baseplate Cover AssyFree Bush Cover BallastBOX Ballast CP StopperBallast Assy Ballast AssyHolder WASHER, M4BALLAST, CP Ballast HolderFAN BLOWER/LAMP Base Assy FAN BLOWER/LAMP Base AssyMicro Switch Cover COVER, WireMicro Switch Micro Switch CAP SensorBALLOON/LAMP Guard Assy BALLOON/LAMP Guard AssySEAL, Normal LampLamp Guard Balloon Cloth CPFreight Policy Terms and Condition of Sale PartsPage HERE’S HOW to GET Help

BG113BC specifications

The Multiquip BG113BC is a cutting-edge concrete and masonry saw designed to meet the demanding needs of construction professionals. This powerful tool combines efficiency, durability, and precision, making it a staple for any mason or contractor looking to deliver high-quality work.

At the core of the BG113BC is its robust engine, which delivers reliable power needed for tough cutting applications. The saw is equipped with a 13 horsepower Honda GX390 engine, which provides both high performance and fuel efficiency. This allows users to work longer hours without the need for constant refueling, helping to improve productivity on job sites.

One of the standout features of the BG113BC is its advanced water containment system. This system is designed to minimize dust production during cutting operations, which is beneficial for both operator safety and compliance with environmental regulations. The integrated water pump ensures that the blade remains cool, reducing wear and tear and extending its lifespan while providing cleaner cuts.

The BG113BC is designed for user comfort and ease of operation. It has a lightweight and compact design that makes it easy to maneuver, even in tight spaces. The adjustable handle provides ergonomic support, allowing operators to maintain a comfortable grip while cutting for extended periods. This reduces operator fatigue and enhances overall effectiveness.

Another impressive characteristic of this concrete saw is its cutting depth capability. With a maximum cutting depth of up to 4.5 inches, it is capable of tackling a variety of materials, including concrete, asphalt, and brick. The blade guard features an easy-to-adjust design that allows operators to quickly change the depth of the cut, increasing versatility on the job.

In terms of technology, the BG113BC incorporates a quick-release blade guard, which simplifies blade changes. This feature significantly reduces downtime and helps maintain workflow. Additionally, the saw is designed with a sturdy frame that reduces vibrations, leading to a more stable cutting experience.

Overall, the Multiquip BG113BC is an exceptional concrete and masonry saw that reflects the brand's unwavering commitment to quality and performance. With its powerful engine, user-friendly features, and innovative technologies, this saw is an invaluable asset for any construction project, ensuring that professionals can achieve precise cuts with ease and efficiency.