Multiquip BG113BC Safety Information, Result in injury to yourself and others, fire extinguisher

Page 6

SAFETY INFORMATION

Do not operate or service the equipment before reading the entire manual. Safety precautions should be followed at all times when operating this equipment.

Failure to read and understand the safety messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you about potential hazards that could injure you or others. The safety messages specifically address the level of exposure to the operator and are preceded by one of four words: DANGER, WARNING, CAUTION or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this equipment will be referenced with hazard symbols which may appear throughout this manual in conjunction with safety messages.

GENERAL SAFETY

CAUTION

„NEVER operate this equipment without proper protective clothing, shatterproof glasses, respiratory protection, hearing protection, steel-toed boots and other protective devices required by the job or city and state regulations.

„ NEVER operate this equipment when not feeling well due to fatigue, illness or when under medication.

„NEVER operate this equipment under the influence of drugs or alcohol.

NOTICE

„This equipment should only be operated by trained and qualified personnel 18 years of age and older.

„Whenever necessary, replace nameplate, operation and safety decals when they become difficult read.

„Manufacturer does not assume responsibility for any accident due to equipment modifications. Unauthorized equipment modification will void all warranties.

„NEVER use accessories or attachments that are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

„ ALWAYS know the location of the nearest

fire extinguisher.

„ ALWAYS know the location of the nearest

first aid kit.

„ALWAYS know the location of the nearest phone or keep a phone on the job site. Also, know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

PAGE 6 — GB113BC GLOBUG LIGHTING SYSTEM — OPERATION AND PARTS MANUAL — REV. #5 (01/16/12)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Model GB113BC Proposition 65 Warning Page Table of Contents Parts Ordering Procedures Ordering parts has never been easier„ Always know the location of the nearest Safety InformationResult in injury to yourself and others fire extinguisher„ Never attempt service on a running machine „ Never unplug the lamp’s AC power cable during operationGenerator Safety „ Always make sure the area aboveLoading and Unloading Specifications SpecificationsDimensions TOP View Side View Stow Position Rear ViewFloodlight Footcandle Plot Based on 360glare-free coverageFloodlight Footcandle Plot BAL120R-Reflector-Shaped Balloon Floodlight Footcandle Plot BAL-115D-Drum Shaped Balloon General Information Alarm BuzzerMachine Safety Decals Balloon EnvelopesComponents Major ComponentsComponents Setup GloBug SetupPositioning the Balloon Place the power ON/OFF switch in the OFF position SETUP/OPERATIONApplying Power ShutdownShutdown StorageMaintenance ZipReconnect the power cables Installing a New LampRemoving the Lamp/Balloon Assembly Removal of WinchRemoving the Lamp Cable Cable Release Access Point Installation of Winch Cable Route the cable around the pulley of the first mast aInstallation of Winch Cutoff any excess zip tie materialBallast Box Removal Balloon/Lamp Placement Maintenance Wiring Diagram Wiring DiagramM1 C6 Periodic Check and Maintenance Troubleshooting Lamps Troubleshooting Mast Explanation of Codes in the Remarks Column Xxxxx only Not Used onBulb Suggested Spare PartsQty Description Balloon ClothNameplate and Decals Lamp Cover BuzzerDecal Caution Lamp Cover Buzzer Nameplate and DecalsDecal Caution Cover Information DECALWARNING, Lift HangerHandle Assy Handle AssySleeve Bearing 30DX34DX20 Handle Grip Includes Item WSnap Ring Base PlateSteering Assy Front Shaft R Steering AssyFront Shaft L Brake PedalOutrigger Assy Outrigger AssyBracket OUT,R R Weight OUT,R RWeight OUT,R L Spacer OUT,R Includes Item WMast Adapter Assy Mast Adapter AssySpacer Stand StandShaft Stand WasherMain Mast Assy Main Mast AssyWinch HM-G103 Switch AssyScrew & WASHER, M5X8 First MastWinch Assy Winch AssyWASHER, Lock M8 FrameDrum Shaft BOLT, M8X15Mast Section Assy Mast Section AssySecond Mast Third MastBaseplate Cover Assy Baseplate Cover AssyStopper Cover BallastBOX Ballast CP Free BushBallast Assy Ballast AssyBallast Holder WASHER, M4BALLAST, CP HolderFAN BLOWER/LAMP Base Assy FAN BLOWER/LAMP Base AssyMicro Switch CAP Sensor COVER, WireMicro Switch Micro Switch CoverBALLOON/LAMP Guard Assy BALLOON/LAMP Guard AssyBalloon Cloth CP LampLamp Guard SEAL, NormalTerms and Condition of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

BG113BC specifications

The Multiquip BG113BC is a cutting-edge concrete and masonry saw designed to meet the demanding needs of construction professionals. This powerful tool combines efficiency, durability, and precision, making it a staple for any mason or contractor looking to deliver high-quality work.

At the core of the BG113BC is its robust engine, which delivers reliable power needed for tough cutting applications. The saw is equipped with a 13 horsepower Honda GX390 engine, which provides both high performance and fuel efficiency. This allows users to work longer hours without the need for constant refueling, helping to improve productivity on job sites.

One of the standout features of the BG113BC is its advanced water containment system. This system is designed to minimize dust production during cutting operations, which is beneficial for both operator safety and compliance with environmental regulations. The integrated water pump ensures that the blade remains cool, reducing wear and tear and extending its lifespan while providing cleaner cuts.

The BG113BC is designed for user comfort and ease of operation. It has a lightweight and compact design that makes it easy to maneuver, even in tight spaces. The adjustable handle provides ergonomic support, allowing operators to maintain a comfortable grip while cutting for extended periods. This reduces operator fatigue and enhances overall effectiveness.

Another impressive characteristic of this concrete saw is its cutting depth capability. With a maximum cutting depth of up to 4.5 inches, it is capable of tackling a variety of materials, including concrete, asphalt, and brick. The blade guard features an easy-to-adjust design that allows operators to quickly change the depth of the cut, increasing versatility on the job.

In terms of technology, the BG113BC incorporates a quick-release blade guard, which simplifies blade changes. This feature significantly reduces downtime and helps maintain workflow. Additionally, the saw is designed with a sturdy frame that reduces vibrations, leading to a more stable cutting experience.

Overall, the Multiquip BG113BC is an exceptional concrete and masonry saw that reflects the brand's unwavering commitment to quality and performance. With its powerful engine, user-friendly features, and innovative technologies, this saw is an invaluable asset for any construction project, ensuring that professionals can achieve precise cuts with ease and efficiency.
Top Page Image Contents