Multiquip GB3LED manual Raising the Mast, Sand Bags

Page 16

SETUP

RAISING THE MAST

Before raising the mast, make sure the upper T-handle bolt lock (Figure 12) is securely tightened. This will prevent the balloon/lamp assembly from falling off. In addition make sure that the lamp power cable is connected to the mating end of the 15 ft (4.5 meters) power source cable.

DANGER

ALWAYS make sure the area above the lighting system is open and clear of overhead power lines and other obstructions. The mast extends in excess of 13 ft. (4 meters) when an optional extension is used. Contact with overhead power lines or other obstructions could result in equipment damage, serious Injury or death!

5.To improve stability and to prevent tipping of the light unit, place sand bags or similar type weight over the tripod legs or weight hook as shown in Figure 12.

UPPER

T-HANDLE

MAST

RAISE LOWER

T-HANDLE

WEIGHT

HOOK

SAND

BAGS

CAUTION

When raising mast, ALWAYS be on the lookout for overhead obstructions such as high voltage power lines. The possibility exists of electrocution, even death! if the lighting system comes in contact with high voltage power lines.

DANGER

When raising mast, ALWAYS be on the lookout for overhead obstructions such as high voltage power lines. The possibility exists of electrocution, even death! if the lighting system comes in contact with high voltage power lines.

Figure 12. Sand Bags

6.Raise mast to desired height and tighten lower T-handle (Figure 12) securely.

PAGE 16 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents GB3LED This Manual Must Accompany the Equipment AT ALL TimesTable of Contents GB3LED Lighting SystemParts Ordering Procedures Ordering parts has never been easierSafety Messages Safety InformationSafety Symbols General Safety Lamp Safety Lighting System SafetyTransporting Safety Mast Safety Balloon SafetyElectrical Safety Specifications SpecificationsDimensions DimensionsIllumination Range Illumination Range Foot CandlesSetup General InformationLighting TransportComponents Major ComponentsComponents Setup Tripod DeploymentBalloon Assembly Placement Place balloon assembly onto mast and tighten Upper T-handleRaising the Mast Sand BagsApplying Power Silent ModeOperation Dimming the LampStorage Unhook the cable from the washer eyeletRetracting Tripod Legs Replacing the Lamp MaintenanceReplacing Balloon Envelope Filter Replacement Accessing FilterMaintenance Check Points Periodic Check and Maintenance Wiring Diagram Electrical Wiring DiagramTroubleshooting TroubleshootingSample partS liSt Explanation of Code in Remarks ColumnSuggested Spare Parts Globug Lighting System 1 to 3 UnitsNameplate and Decals Part Name Electrical Assy Part Name QTY Remarks Tripod Assy Tripod Case Mast Assy Knob Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

GB3LED specifications

The Multiquip GB3LED is a state-of-the-art portable job site light designed to illuminate work areas with its exceptional brightness and efficiency. As construction and outdoor activities often take place under varying light conditions, the GB3LED stands out by providing powerful lighting solutions that enhance visibility and safety.

One of the standout features of the GB3LED is its impressive LED technology. The light is equipped with high-performance LED bulbs that produce a daylight-like illumination, ensuring that every corner of the workspace is brightly lit. This not only aids in visibility but also reduces the likelihood of accidents, making it an essential tool for construction sites, large outdoor events, and emergency situations. The LED technology also boasts a longer life span compared to traditional lighting options, ensuring reliability over extended use.

The GB3LED is designed with versatility in mind. It is equipped with a durable but lightweight frame, which makes it easy to transport and set up in various locations. The unit can be positioned on the ground or mounted on a tripod, depending on the specific lighting needs of the job. This adaptability allows users to customize their lighting angles and heights for optimal coverage.

A key characteristic of the GB3LED is its energy efficiency. Consuming significantly less power than conventional halogen lights, it not only helps in reducing operational costs but also minimizes environmental impact. This eco-friendly approach is complemented by its ability to produce less heat, ensuring that it remains safe to use in close proximity to combustible materials.

The GB3LED is also built to withstand the rigors of job site demands. Its rugged construction is water and dust resistant, ensuring reliability in adverse weather conditions and challenging environments. This durability makes it a preferred choice for contractors and outdoor workers who require dependable lighting solutions.

To enhance user convenience, the Multiquip GB3LED features easy-to-use controls, allowing for quick adjustments to brightness levels. This flexibility enables operators to tailor the light output to the specific requirements of the task at hand, whether it’s illuminating a wide area or focusing on a particular detail.

In summary, the Multiquip GB3LED is engineered to meet the diverse lighting needs of today’s demanding job sites. With its superior LED technology, portability, energy efficiency, and rugged durability, it is a reliable partner for professionals who need consistent and high-quality lighting solutions in their work environment.
Top Page Image Contents