Multiquip GB3LED manual Balloon Safety, Mast Safety, Electrical Safety

Page 7

SAFETY INFORMATION

BALLOON SAFETY

WARNING

To prevent serious burns, NEVER touch or unzip the balloon envelope when the

lamp is on.

CAUTION

ALWAYS keep the balloon away from sharp objects and excessive amounts of heat.

NOTICE

To prevent balloon deformation, NEVER use lighting system in strong winds.

DO NOT place the balloon inside its protective cover until the lamp has had a suffi cient amount of time to cool down. This will prevent the balloon’s nylon cover from being burned (touching the lamp surface).

ALWAYS place the balloon inside its protective cover after each use. This will prolong the life of the balloon material, keeping it protected from harsh environmental elements.

Replace balloon immediately if damaged. A damaged balloon will not infl ate properly, and may become more damaged by touching the hot lamp surface.

DO NOT use excessive force when zipping and unzipping the balloon. Be gentle with the zipper mechanism. If the zipper is broken, the balloon will become unusable.

MAST SAFETY

 

 

 

 

 

 

 

CAUTION

 

 

When raising or lowering the mast, keep

 

 

 

 

 

 

 

MAST

hands and fi ngers clear of the various mast

 

 

 

 

sections, this will prevent hands and fi ngers

 

 

POINT

from getting pinched.

 

PINCH

 

 

NEVER attach anything to the mast.

ALWAYS lower the mast when not in use, or if

high winds or electrical storms are expected in the area.

ELECTRICAL SAFETY

DANGER

Lighting system is equipped with a ground pin on the power plug. For your protection, ALWAYS complete the grounding path. NEVER insert the AC power plug into a 2-prong receptacle to operate lighting system.

When applying power to the lighting system, ALWAYS connect the AC power plug to a 3-prong receptacle that is grounded. The possibility exists of electrical shock, electrocution and even death if the lighting system is not grounded.

NEVER operate lighting system or handle any electrical equipment while standing in water, while barefoot, while hands are wet or in the rain.A dangerous electrical shock could occur, causing severe bodily harm or even death.

ALWAYS make sure the area above

the lighting system is open and clear of overhead power lines and other obstructions. Contact with overhead power lines or other obstructions could result in equipment damage, electrical shock, electrocution and even death.

Power Cord/Cable Safety

DANGER

NEVER let power cords or cables lay in water.

NEVER use damaged or worn cables or cords. Inspect for cuts in the insulation

NEVER grab or touch a live power cord or cable with wet hands. The possibility exists of electrical shock, electrocution or death.

Make sure power cables are securely connected. Incorrect connections may cause electrical shock and damage to the lighting system.

NOTICE

ALWAYS make certain that proper power or extension cord has been selected for the job. See Cable Selection Chart in this manual.

GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents This Manual Must Accompany the Equipment AT ALL Times GB3LEDGB3LED Lighting System Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Messages Safety InformationSafety Symbols General Safety Lamp Safety Lighting System SafetyTransporting Safety Mast Safety Balloon SafetyElectrical Safety Specifications SpecificationsDimensions DimensionsIllumination Range Foot Candles Illumination RangeTransport SetupGeneral Information LightingMajor Components ComponentsComponents Tripod Deployment SetupPlace balloon assembly onto mast and tighten Upper T-handle Balloon Assembly PlacementSand Bags Raising the MastDimming the Lamp Applying PowerSilent Mode OperationUnhook the cable from the washer eyelet StorageRetracting Tripod Legs Replacing the Lamp MaintenanceReplacing Balloon Envelope Accessing Filter Filter ReplacementMaintenance Check Points Periodic Check and Maintenance Electrical Wiring Diagram Wiring DiagramTroubleshooting TroubleshootingExplanation of Code in Remarks Column Sample partS liStGlobug Lighting System 1 to 3 Units Suggested Spare PartsNameplate and Decals Part Name Electrical Assy Part Name QTY Remarks Tripod Assy Tripod Case Mast Assy Knob Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

GB3LED specifications

The Multiquip GB3LED is a state-of-the-art portable job site light designed to illuminate work areas with its exceptional brightness and efficiency. As construction and outdoor activities often take place under varying light conditions, the GB3LED stands out by providing powerful lighting solutions that enhance visibility and safety.

One of the standout features of the GB3LED is its impressive LED technology. The light is equipped with high-performance LED bulbs that produce a daylight-like illumination, ensuring that every corner of the workspace is brightly lit. This not only aids in visibility but also reduces the likelihood of accidents, making it an essential tool for construction sites, large outdoor events, and emergency situations. The LED technology also boasts a longer life span compared to traditional lighting options, ensuring reliability over extended use.

The GB3LED is designed with versatility in mind. It is equipped with a durable but lightweight frame, which makes it easy to transport and set up in various locations. The unit can be positioned on the ground or mounted on a tripod, depending on the specific lighting needs of the job. This adaptability allows users to customize their lighting angles and heights for optimal coverage.

A key characteristic of the GB3LED is its energy efficiency. Consuming significantly less power than conventional halogen lights, it not only helps in reducing operational costs but also minimizes environmental impact. This eco-friendly approach is complemented by its ability to produce less heat, ensuring that it remains safe to use in close proximity to combustible materials.

The GB3LED is also built to withstand the rigors of job site demands. Its rugged construction is water and dust resistant, ensuring reliability in adverse weather conditions and challenging environments. This durability makes it a preferred choice for contractors and outdoor workers who require dependable lighting solutions.

To enhance user convenience, the Multiquip GB3LED features easy-to-use controls, allowing for quick adjustments to brightness levels. This flexibility enables operators to tailor the light output to the specific requirements of the task at hand, whether it’s illuminating a wide area or focusing on a particular detail.

In summary, the Multiquip GB3LED is engineered to meet the diverse lighting needs of today’s demanding job sites. With its superior LED technology, portability, energy efficiency, and rugged durability, it is a reliable partner for professionals who need consistent and high-quality lighting solutions in their work environment.
Top Page Image Contents