Multiquip GB3LED manual Lighting System Safety, Lamp Safety, Transporting Safety

Page 6

SAFETY INFORMATION

LIGHTING SYSTEM SAFETY

WARNING

NEVER disconnect any emergency or safety devices. These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death. Disconnection of any of these devices will void all warranties.

CAUTION

NEVER attempt service on a running machine.

NOTICE

To prevent the lighting system from overturning, NEVER use in winds that exceed 22 mph (10 m/s).

The lighting system should only be used in temperatures between 23° to 104°F (-5° to 40° C). Failure to comply with these operating parameters could cause the lamp to malfunction and shorten the ballast life.

ALWAYS keep the lighting system in proper running condition.

Fix damage to lighting system and replace any broken parts immediately.

ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children and unauthorized personnel.

LAMP SAFETY

WARNING

NEVER attempt to replace lamp with the power on. Always unplug the power cord from the generator or power source when changing the lamp.

ALWAYS allow a suffi cient amount of time for the lamp to cool before changing.The possibility exists of severe burns.

CAUTION

NEVER use force when installing the lamp.Excessive force could cause the lamp to break, causing bodily harm.

NOTICE

NEVER leave any grease or oil residue on lamp surface when replacing or removing lamp. This can create hot spots, reducing the service life of the lamp.

ALWAYS make sure lamp surface is clean and dry.

ALWAYS replace with MQ recommended type lamp. See parts section of this manual.

If applicable, ALWAYS make sure the lamp guard is installed correctly. NEVER deform the lamp guard.

NEVER unplug the lamp’s AC power cable during operation.

ALWAYS have a trained technician to install and remove lamp or replace any damaged fi xture wiring.

TRANSPORTING SAFETY

NOTICE

When transporting the tripod lighting system, if applicable, always place in stow position and place tripod in its carrying case.

ALWAYS remove balloon/lamp assembly from the mast when transporting lighting system. This will prevent damage to the bulb due to vibration.

NEVER leave the balloon/lamp exposed during transport. Exposure to excess wind or rain could damage the balloon’s nylon cover.

ALWAYS place balloon inside its protective cover during transport. Be sure the cover is secured tightly around the balloon/lamp assembly.

PAGE 6 —GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents GB3LED This Manual Must Accompany the Equipment AT ALL TimesTable of Contents GB3LED Lighting SystemParts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesSafety Symbols General Safety Lighting System Safety Lamp SafetyTransporting Safety Balloon Safety Mast SafetyElectrical Safety Specifications SpecificationsDimensions DimensionsIllumination Range Illumination Range Foot CandlesLighting SetupGeneral Information TransportComponents Major ComponentsComponents Setup Tripod DeploymentBalloon Assembly Placement Place balloon assembly onto mast and tighten Upper T-handleRaising the Mast Sand BagsOperation Applying PowerSilent Mode Dimming the LampStorage Unhook the cable from the washer eyeletRetracting Tripod Legs Maintenance Replacing the LampReplacing Balloon Envelope Filter Replacement Accessing FilterMaintenance Check Points Periodic Check and Maintenance Wiring Diagram Electrical Wiring DiagramTroubleshooting TroubleshootingSample partS liSt Explanation of Code in Remarks ColumnSuggested Spare Parts Globug Lighting System 1 to 3 UnitsNameplate and Decals Part Name Electrical Assy Part Name QTY Remarks Tripod Assy Tripod Case Mast Assy Knob Terms and Conditions of Sale Parts Freight PolicyPage HERE’S HOW to GET Help

GB3LED specifications

The Multiquip GB3LED is a state-of-the-art portable job site light designed to illuminate work areas with its exceptional brightness and efficiency. As construction and outdoor activities often take place under varying light conditions, the GB3LED stands out by providing powerful lighting solutions that enhance visibility and safety.

One of the standout features of the GB3LED is its impressive LED technology. The light is equipped with high-performance LED bulbs that produce a daylight-like illumination, ensuring that every corner of the workspace is brightly lit. This not only aids in visibility but also reduces the likelihood of accidents, making it an essential tool for construction sites, large outdoor events, and emergency situations. The LED technology also boasts a longer life span compared to traditional lighting options, ensuring reliability over extended use.

The GB3LED is designed with versatility in mind. It is equipped with a durable but lightweight frame, which makes it easy to transport and set up in various locations. The unit can be positioned on the ground or mounted on a tripod, depending on the specific lighting needs of the job. This adaptability allows users to customize their lighting angles and heights for optimal coverage.

A key characteristic of the GB3LED is its energy efficiency. Consuming significantly less power than conventional halogen lights, it not only helps in reducing operational costs but also minimizes environmental impact. This eco-friendly approach is complemented by its ability to produce less heat, ensuring that it remains safe to use in close proximity to combustible materials.

The GB3LED is also built to withstand the rigors of job site demands. Its rugged construction is water and dust resistant, ensuring reliability in adverse weather conditions and challenging environments. This durability makes it a preferred choice for contractors and outdoor workers who require dependable lighting solutions.

To enhance user convenience, the Multiquip GB3LED features easy-to-use controls, allowing for quick adjustments to brightness levels. This flexibility enables operators to tailor the light output to the specific requirements of the task at hand, whether it’s illuminating a wide area or focusing on a particular detail.

In summary, the Multiquip GB3LED is engineered to meet the diverse lighting needs of today’s demanding job sites. With its superior LED technology, portability, energy efficiency, and rugged durability, it is a reliable partner for professionals who need consistent and high-quality lighting solutions in their work environment.
Top Page Image Contents