Multiquip GB3LED manual Operation, Applying Power, Dimming the Lamp, Silent Mode, Shutdown

Page 17

OPERATION

APPLYING POWER

1. Connect the AC power cable to the 120 VAC receptacle on the generator used. See Figure 13.

120VAC

RECEPTACLE

 

20A

TYPICAL

 

 

POWER

 

GENERATOR

 

FRONT PANEL

CABLE

 

 

 

 

120V

 

Figure 13. Connecting to Power Source

2.Start the generator as indicated in the generator manual.

3.Turn on the power of the generator. The balloon will start to inflate and the lamp will turn on. at 200 W.

DIMMING THE LAMP

1.Press the dimmer switch to control the brightness of the lamp (Figure 14). The lamp can be turned off or set to 100W, 200W, 300W.The corresponding LED will light red when selected (Figure 15).

DIMMER

SWITCH

Figure 14. Dimmer Switch

Figure 15. Brightness LED Indicators

2.Zip up the bottom of the balloon completely after use of the dimmer switch.

SILENT MODE

Noise coming from the unit during operation can be eliminated.

1.Press and hold the dimmer switch (Figure 14) for 2 seconds. The blue LED in the center of the switch will flash when in silent mode.

2.To switch back to normal mode, press and hold the dimmer switch for 3 seconds. The blue LED will stop flashing.

NOTICE

The brightness of the lamp can still be adjusted when in silent mode.

When unit is restarted, it will revert to normal mode even if silent mode was selected prior to shutdown.

SHUTDOWN

1.Turn off the power switch of the generator.The balloon should start to deflate and the lamp will turn off.

2.Disconnect the AC power cable from the generator.

GB3LED LIGHTING SYSTEM • OPERATION AND PARTS MANUAL — REV. #0 (03/18/14) — PAGE 17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents This Manual Must Accompany the Equipment AT ALL Times GB3LEDGB3LED Lighting System Table of ContentsOrdering parts has never been easier Parts Ordering ProceduresSafety Symbols Safety InformationSafety Messages General Safety Transporting Safety Lighting System SafetyLamp Safety Electrical Safety Balloon SafetyMast Safety Specifications SpecificationsDimensions DimensionsIllumination Range Foot Candles Illumination RangeGeneral Information SetupLighting TransportMajor Components ComponentsComponents Tripod Deployment SetupPlace balloon assembly onto mast and tighten Upper T-handle Balloon Assembly PlacementSand Bags Raising the MastSilent Mode Applying PowerOperation Dimming the LampUnhook the cable from the washer eyelet StorageRetracting Tripod Legs Replacing Balloon Envelope MaintenanceReplacing the Lamp Accessing Filter Filter ReplacementMaintenance Check Points Periodic Check and Maintenance Electrical Wiring Diagram Wiring DiagramTroubleshooting TroubleshootingExplanation of Code in Remarks Column Sample partS liStGlobug Lighting System 1 to 3 Units Suggested Spare PartsNameplate and Decals Part Name Electrical Assy Part Name QTY Remarks Tripod Assy Tripod Case Mast Assy Knob Freight Policy Terms and Conditions of Sale PartsPage HERE’S HOW to GET Help

GB3LED specifications

The Multiquip GB3LED is a state-of-the-art portable job site light designed to illuminate work areas with its exceptional brightness and efficiency. As construction and outdoor activities often take place under varying light conditions, the GB3LED stands out by providing powerful lighting solutions that enhance visibility and safety.

One of the standout features of the GB3LED is its impressive LED technology. The light is equipped with high-performance LED bulbs that produce a daylight-like illumination, ensuring that every corner of the workspace is brightly lit. This not only aids in visibility but also reduces the likelihood of accidents, making it an essential tool for construction sites, large outdoor events, and emergency situations. The LED technology also boasts a longer life span compared to traditional lighting options, ensuring reliability over extended use.

The GB3LED is designed with versatility in mind. It is equipped with a durable but lightweight frame, which makes it easy to transport and set up in various locations. The unit can be positioned on the ground or mounted on a tripod, depending on the specific lighting needs of the job. This adaptability allows users to customize their lighting angles and heights for optimal coverage.

A key characteristic of the GB3LED is its energy efficiency. Consuming significantly less power than conventional halogen lights, it not only helps in reducing operational costs but also minimizes environmental impact. This eco-friendly approach is complemented by its ability to produce less heat, ensuring that it remains safe to use in close proximity to combustible materials.

The GB3LED is also built to withstand the rigors of job site demands. Its rugged construction is water and dust resistant, ensuring reliability in adverse weather conditions and challenging environments. This durability makes it a preferred choice for contractors and outdoor workers who require dependable lighting solutions.

To enhance user convenience, the Multiquip GB3LED features easy-to-use controls, allowing for quick adjustments to brightness levels. This flexibility enables operators to tailor the light output to the specific requirements of the task at hand, whether it’s illuminating a wide area or focusing on a particular detail.

In summary, the Multiquip GB3LED is engineered to meet the diverse lighting needs of today’s demanding job sites. With its superior LED technology, portability, energy efficiency, and rugged durability, it is a reliable partner for professionals who need consistent and high-quality lighting solutions in their work environment.
Top Page Image Contents