FIGURE 21.
Tighten the outside nut against the inside nut, using two 1/2II wrenches. See figure 22.
NOTE
Friction pads must be replaced when the inside of cam lever touches the
housing.
FIGURE 23.
STEERING SHAFT
Lubricate steering shaft at least once a season with light oil.
TRANSAXLE
The transaxle is lubricated and sealed at the fac- tory and does not require checking. If disassem- bled for any reason, lubricate with 24 oz. of E.P. Lithium grease.
FRONT WHEELS
The front wheels are provided with grease fittings. Lubricate at least once a season with automotive
PIVOT POINTS
Lubricate all pivot points with light oil at least once a season.
FIGURE 22.
STEERING GEARS
Lubricate teeth of steering gears with automotive
14
,'3.
..:;;.
~WARN~N_G.-
Disconnect the spark plug wire and ground against the engine be- fore performing any repairs or main- tenance.
CRANKCASE OIL
Check the oil level in the crankcase before each
use of the machine and after every five hours ofoperation. Oil level should be maintained as in-
structed in the separate engine manual.
After the first five hours of operating a newengine, drain the oil from the crankcase while
engine is still hot and refill crankcase with new
oil; thereafter change the oil every 25 hours ofoperation. Refer to the engine manual.