Montgomery Ward TMO-33902A, TMO-33986C specification

FIGURE 6.

FIGURE 7.

Lift the transmission cover. Unplug the green safety wire from beneath the transmission-cover.

See figure 6. Remove transmission

cover.

4.Place the battery in the lawn tractor so that

the positive terminal is facing the right side of-the unit. See figure 7.

NOTE

Right and left hand sides of the unit are determined from the operating position, facing forward.

Slide the square nut (provided with battery hardware) into the positive (+) terminal. Place the positive (heavy red wire) cable and the small red wire on the positive terminal. Secure with screw and lock washer provided. See figure 7.6.

Slide the square nut (provided with battery hardware) into the negative (-) terminal. Place the negative (heavy black wire) cable on the negative terminal. Secure with screw and lock washer provided.

7.Hook one hold-down rod (G) into the hole in the frame beside the battery. See figure 7. Place the battery cover (F) in position over the hold-down rod. Secure with wing nut (H). At- tach other hold-down rod to the other side of battery cover in the same manner. See figure-8.

53.