Minelab x-terra manual

Page 65

The display window may be prone to scratching or damage if not treated with care. A protective control box cover is available. (Protective Accessories, pg. 68)

Ensure the coil cable is in good condition and not subject to undue stress (particularly where it is connected to the coil).

Always remember to turn oﬀ the detector before changing coils.

Previous Minelab coils will not function with the X-Terra detector.

65

Old, ﬂat or faulty batteries may cause many detector problems, through electrolyte leakage. Take the batteries out if the detector will not be used for long periods of time (e.g. more than 1 week). Ensure that only good quality batteries are used and that they are replaced when the low battery signal

Do not use rechargeable Lithium Ion batteries as their voltage is too high. Non rechargeable Lithium batteries may be used.

Image 65

Contents Page Holding the Detector Connecting the CoilSweeping the Coil Discrimination ScaleDetailed Detector Operation VolumeControl Box Coil Page Page Page Attach the middle shaft to the upper shaft in the same way Holding the Detector, pg Connecting Page Behaviour, pg Close the battery door by pushing and sliding it downwardsCongratulations Thread your arm through the armrest Shaft is too short 5cm Coil parallel to the ground Adjustment to compensate for diﬀerent types of soil Liquid Crystal Display LCD area Overloading is not harmful to the detectors electronics There are many metallic objects insideIf the detector emits an overload sound Page Ground, there may be unknown buried metal objects Rusted nail, pull-tab, brass button and aluminium foilIs passed over a target X-Terra coil is waterproof. Care of Your X-Terra, pg Non-ferrous coin Discrimination PatternMedium High Low Ferrous nail Page Numeric identiﬁer Target IDPage X-Terra 50 has 18 segments X-Terra 30 has 12 segmentsExample targets only Accepts signals from non-ferrous targets No target signals are rejectedAll Metal Pattern PatternAll metal pattern cannot be edited 2AL Low High This target willPage Ask for permission before searching on private property Page Page Patterns Depth IndicatorAll Metal Menu scale MenuPinpoint Indicates that pinpoint is activatedReject Identiﬁcation BatteryHeadphones Detection SettingsTarget ID Discriminated Detected Rejected accepted Segment segmentDetection Settings 15-20 = X-Terra Factory preset =Terra Page Terra Volume range = Page Page Page Ground balance range = Factory preset = Page 10 cm Low High Medium Quiet Press Accept Reject to reject that target ID All metal pattern cannot be edited Method 2 to reject a speciﬁc target ID using +Press and hold Press once During the start up sequence Error Patterns Erased / Factory PresetLow Battery Signal Low Battery ShutdownPinpoint Response Target ResponseNoise False DetectionsCoil Unplugged Coil ErrorBut the detector is not recognising it Coil Incompatible Black segments inside the outline Use of headphones will increase battery life Black segment inside the outline Icon will begin to ﬂash forAlkaline NiMH/NiCad Your X-Terra is common sense Page Volume, pg As soon as the headphones are connectedPlug the headphone jack into the socket Connecting HeadphonesAlways use headphones with a ¼ jack Environmental Cover Skid PlateTurn the detector oﬀ using Power To attach an accessory coilWeight Excluding Batteries Search ModeOptional Accessories TransmissionStandard 7.5 kHz + Power+ All Metal 20, 24, 28, 32, 36, 40Page Page Available on X-Terra 50 model only Page World Leader in Metal Sensing Technology Working for a Cleaner Greener Future