Minelab x-terra manual Working for a Cleaner Greener Future

Page 77

Please return the tear oﬀ section of your warranty card to Minelab as soon as possible.

Disclaimer: The Minelab metal detector discussed in this operating manual has been expressly designed and manufactured as

a quality hobbyist metal detector and is recommended for use in coin, treasure and general metal detection in non-hazardous environments. This metal detector has not been designed for use as a mine detector or as a live munitions detection tool.

Working for a Cleaner,

Greener Future

For Consumers within the European Union: Do not dispose of this equipment in general household waste.

The crossed out wheeled bin indicated on this equipment is an indicator that this unit should not be disposed of in general household waste, but recycled in compliance with local government regulations or environmental requirements.

Please dispose of this equipment via a recycling service or centre, or by returning the unit to the respective Minelab or Halcro outlet as appropriate for your unit. This will enable the equipment to be disposed of in an environmentally safe manner.

Disposal of unwanted electronic equipment in landﬁlled waste may contribute to adverse long term environmental eﬀect due to the leaching of contaminating and toxic substances contained within some electronic equipment.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES

Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note:

Since there may be a variety of options available for this detector, equipment may vary according to the model or items ordered with your detector. Certain descriptions and illustrations may also diﬀer (in this manual) from the exact model that you purchased. In addition, Minelab reserves the right to respond to ongoing technical progress by introducing changes in design, equipment and technical features at any time.

Item Number: 4901 - 0055

Revision: 1.1

Image 77

Contents Page Holding the Detector Connecting the CoilSweeping the Coil Discrimination ScaleDetailed Detector Operation VolumeControl Box Coil Page Page Page Attach the middle shaft to the upper shaft in the same way Holding the Detector, pg Connecting Page Behaviour, pg Close the battery door by pushing and sliding it downwardsCongratulations Thread your arm through the armrest Shaft is too short 5cm Coil parallel to the ground Adjustment to compensate for diﬀerent types of soil Liquid Crystal Display LCD area Overloading is not harmful to the detectors electronics There are many metallic objects insideIf the detector emits an overload sound Page Ground, there may be unknown buried metal objects Rusted nail, pull-tab, brass button and aluminium foilIs passed over a target X-Terra coil is waterproof. Care of Your X-Terra, pg Non-ferrous coin Discrimination PatternMedium High Low Ferrous nail Page Numeric identiﬁer Target IDPage X-Terra 50 has 18 segments X-Terra 30 has 12 segmentsExample targets only Accepts signals from non-ferrous targets No target signals are rejectedAll Metal Pattern PatternAll metal pattern cannot be edited 2AL Low High This target willPage Ask for permission before searching on private property Page Page Patterns Depth IndicatorAll Metal Menu scale MenuPinpoint Indicates that pinpoint is activatedReject Identiﬁcation BatteryHeadphones Detection SettingsTarget ID Discriminated Detected Rejected accepted Segment segmentDetection Settings 15-20 = X-Terra Factory preset =Terra Page Terra Volume range = Page Page Page Ground balance range = Factory preset = Page 10 cm Low High Medium Quiet Press Accept Reject to reject that target ID All metal pattern cannot be edited Method 2 to reject a speciﬁc target ID using +Press and hold Press once During the start up sequence Error Patterns Erased / Factory PresetLow Battery Signal Low Battery ShutdownPinpoint Response Target ResponseNoise False DetectionsCoil Unplugged Coil ErrorBut the detector is not recognising it Coil IncompatibleBlack segments inside the outline Use of headphones will increase battery lifeBlack segment inside the outline Icon will begin to ﬂash forAlkaline NiMH/NiCad Your X-Terra is common sense Page Volume, pg As soon as the headphones are connectedPlug the headphone jack into the socket Connecting HeadphonesAlways use headphones with a ¼ jack Environmental Cover Skid PlateTurn the detector oﬀ using Power To attach an accessory coilWeight Excluding Batteries Search ModeOptional Accessories TransmissionStandard 7.5 kHz + Power+ All Metal 20, 24, 28, 32, 36, 40Page Page Available on X-Terra 50 model only Page World Leader in Metal Sensing Technology Working for a Cleaner Greener Future