www.minelab.com
THE MINELAB EXPLORER II
MODIFYING THE DISPLAY
Figure 5.9 Quickstart’s standard screen
Full screen display
Figure 5.9, 5.10
If you wish to enlarge the Smartfind or Digital display during detecting, it is possible to instruct the detector to remove the display border and other screen elements leaving only the target details displayed on the full screen.
STEP 1 Press the shift button next to the full screen icon at the right of the control panel. This will increase the viewing area from that depicted in Figure 5.9 to that in Figure 5.10.
STEP 2 To return to the original screen, press the same shift button again (next to the small bar at the edge of screen).
Figure 5.10 Quickstart as full screen display
5
QUICKSTART
48
Figure 5.11 Quickstart’s Main Menu
Figure 5.12 Display menu’s contrast adjustment screen
Adjusting the display contrast
Figure 5.11, 5.12
If brighter or more overcast conditions make the detector display harder to see, it is possible to adjust the display contrast.
STEP 1 Press the MENU shortcut button on the control panel. This will display the MAIN MENU (Figure 5.11).
STEP 2 Four menu items will be displayed, each with a
STEP 3 Press the shift button next to the DISPLAY option. To denote selection, the box will fill in with solid black and a new screen with a slider control will appear (Figure 5.12).
STEP 4 Press the shift buttons next to the arrows of the slider control to change the contrast of the screen display from the factory setting of 6.
STEP 5 Press the DETECT shortcut button again to continue detecting.
MODIFYING THE DISPLAY