Minelab II quick start Main Menu Audio Sounds Ferrous

THE MINELAB EXPLORER II

Ferrous

Main Menu > Audio > Sounds > FERROUS

Selecting FERROUS adjusts the tone according to the target’s ferrous content (the horizontal axis of the Smartfind screen or the first number in the Digital display). A low ‘blaat’ tone denotes a highly ferrous object, displayed on the left of the screen and having a high ‘Fer’ number. A high pitched ‘squeak’ tone denotes a non-ferrous target, displayed on the right of the Smartfind screen and having a low ‘Fer’ number.

Clear the Smartfind screen to test the Ferrous sound. There are two ways to do this: adjust the Iron Mask level to -16 or choose CLEAR from Main Menu > Discrim > SELECT.

NOTE When the Iron Mask is set to the left of the Smartfind screen (setting -16) there will be a maximum variation in pitch between detected objects. When the Iron Mask is fully activated (setting 0) there will be no signal for objects with ferrous content.

5

QUICKSTART

57

AUDIO: ADJUSTING THE SOUNDS