Minelab II quick start Audio Adjusting the Volume, Introducing Volume, Max limit

	THE MINELAB EXPLORER II
AUDIO: ADJUSTING THE VOLUME
	Introducing Volume
	Figure 5.15
	Main Menu > Audio > VOLUME
	The VOLUME screen of the Audio menu displays two slider
	controls: MAX LIMIT and GAIN (Figure 5.15).
Figure 5.15 Volume adjustment screen	NOTE To test sounds upon selection it is necessary to
	move the coil across the target.
	Max limit
	Main Menu > Audio > Volume > MAX LIMIT (adjustment)
	This setting is the detector’s overriding volume control. It controls
	the ‘loudness’ of a signal response emitted from the detector,
	much like the volume knob on a stereo system.
	A setting of 0 instructs the detector to be completely silent.	5
	A setting of 10 instructs the detector’s audio to operate at its	QUICKSTART
	Lower settings are likely to help extend battery usage time.
	maximum level of ‘loudness’.
Volume	(Continued next page)
It is also possible to access the
volume menu (see page 71) from the
icon shortcut of the Advanced
mode’s LEARN screen.
		53
	AUDIO: ADJUSTING THE VOLUME