Vector VEC097 owner manual Operating Time, Powering an AC Load, Placement of ElectroMate

Page 11

5.3Operating Time

Vector recommends that the operator recharge the battery system as frequently as possible using the supplied VEC077EM Battery Charger. This will guard against any unexpected shutdown of the equipment and will ensure that there is always sufficient battery capacity. The inverter will sound it’s alarm when DC voltage drops to 10.5 Volts.

5.4Powering an AC Load

The Power Inverter is equipped with a dual GFCI receptacle and On/Off Switch. Plug the power cord from the equipment you wish to operate into the AC receptacle. The green LED will light to indicate that the unit is functioning. Make sure the wattage rating of your equipment is within 1800 watts. If so, turn on your equipment. If an audible alarm sounds, the DC supply voltage may be too low, and the battery needs to be recharged.

Do not connect to AC distribution wiring: the inverter is engineered to be connected directly to standard electrical and electronic equipment in the manner described above. Do not directy wire the power inverter to household or RV AC distribution wiring. You may use extension cords and outlet strips.

CAUTION: RECHARGEABLE APPLIANCES

Certain rechargeable devices are recharged by plugging them directly into an AC receptacle. When first using a rechargeable device, monitor its temperature for the initial ten minutes of use to determine whether it becomes warmer than usual. If excessive heat is generated, it is a good indication that the device should not be used with this inverter. This problem does not occur with the majority of battery-operated equipment. Most of these devices use a separate charger or transformer that is plugged into an AC receptacle. This inverter is easily capable of powering most chargers and transformers.

5.5Placement of ElectroMate

For best operating results, keep in mind that the Inverter will generate heat – the larger the AC load the more heat generated. Therefore, the user should try to use ElectroMate in a cool dry place out of sunlight, if possible.

WARNING: NEVER OPERATE ELECTROMATE WITH THE PLASTIC DUST COVER ON. REMOVE THE DUST COVER BEFORE OPERATING ELECTROMATE.

WARNING: Inverters generate heat while operating. Power inverters should only be used in locations that meet the following criteria:

DRY - Do not allow water or other liquids to come into contact with the inverter.

COOL - Ambient air temperature should be between 30 degrees F (-1 degree C) non-condensing, and 100° F (38° C).

VENTILATED - Keep the area surrounding the inverter clear to ensure free air circulation around the unit. Do not place items on or over the inverter during operation. Therefore, remove the plastic dust cover before operating the sys- tem. The unit will shut down if the internal temperature gets too hot. Restart the unit after it cools.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents VEC097 Volt AC, 12 Volt DC Portable Power SupplyJump-Start Warnings and Cautions Important Safety InstructionsContents Introduction General Description Jump-Start Cables and Protection Applications Additional Key FeaturesJump-start Procedure Using ElectroMate as a Jump-Start SystemInverter Operation USE AS a 12 Volt DC Portable Power SupplyPrinciples of Operation Use with AppliancesOperating Time Powering an AC LoadPlacement of ElectroMate Operating Tips Troubleshooting the InverterCompressor/Tire Inflator Typical inflation times Compressor Safety InformationCompressor Use Inflation of tire or products with a valve stemInflating Items Without a a Tire Stem Fluorescent LampRecharging ElectroMate DC Recharge AC RechargeSimultaneous Recharge and Inverter Operation Maintenance/Replacement PartsBattery Disposal Battery Disposal WarningsAppendix a Battery Installation SpecificationsExtending Operating Time Appendix a Battery Installation Con’tAppendix B Symptom Troubleshooting Appendix CYear Limited Warranty Registration Form

VEC097 specifications

The Vector VEC097 is a highly regarded automotive emergency vehicle jump starter, designed for both consumer and professional use. It stands out as a reliable power source for various situations, combining powerful features with user-friendly technology.

One of the VEC097's primary characteristics is its robust battery capacity. With a peak current of 1,000 amps, it can jump-start a wide range of vehicles, including cars, trucks, and SUVs. This substantial power output makes it an essential tool for anyone who frequently encounters vehicle battery issues. Additionally, the device is equipped with a durable 22,000 mAh lithium-ion rechargeable battery, ensuring it can handle multiple jump-starts on a single charge.

The compact design of the VEC097 enhances its portability, making it easy to store in a trunk or under a seat. Its lightweight construction, combined with a built-in handle, allows for convenient transportation. Despite its compactness, it doesn't compromise on functionality, as it has numerous built-in features that make it stand out from competitors.

Among its key technologies is the integrated LED flashlight, perfect for emergency situations or when working in low-light environments. The flashlight also features different modes, including a strobe option, increasing its utility during roadside emergencies. Moreover, the VEC097 incorporates USB ports for charging electronic devices, allowing users to power smartphones, tablets, and other gadgets while on the go.

Safety is a priority with the Vector VEC097, which includes built-in safety protections such as short-circuit, overload, and overcharge prevention systems. These features significantly reduce the risk of damage to both the device and the vehicle’s battery. The jump cables are designed with a highly visible color for easy identification and come with strong clamps that ensure a secure connection during use.

In conclusion, the Vector VEC097 is a versatile and dependable jump starter, combining power, portability, and safety. Its impressive features make it an excellent investment for vehicle owners seeking peace of mind on the road. Whether for everyday emergencies or more significant automotive challenges, the VEC097 is engineered to deliver when it matters most, proving itself as a savvy choice for any driver.
Top Page Image Contents