Vector VEC097 owner manual Specifications, Appendix a Battery Installation

Page 17

11.Specifications:

Jump-Start Clamps

.....................................................

400 Amps - Heavy Duty Copper

Jumper Cables

9mm2 Welding Cable

Battery

User-Supplied 12 Volt, Group 27 size. Sealed Lead-Acid

Fluorescent Lamp

8 Watt Fluorescent Tube

Dual Accessory Socket Protection

30 Amp Self-Resetting Breaker

Power Inverter

1800 Watt,15 minutes, 1500 watt continuous, 60 Hz, 110-120 VAC

Power Inverter Momentary Peak

3000 Watts

Inverter Waveform

Modified Sine Wave

Inverter DC Input Range

10.0 to 15.5 VDC

Inverter Low Battery Audible Alarm

10.6 VDC

Automatic Shutdown

Low Voltage, Overload, Over Temperature

Compressor

Max Pressure, 300 PSI

Pressure Gauge Type

Analog Dial

Air Delivery

9kg /cm

Operating temp

-20°C to +80° C

Motor current

9 Amps

Dimensions

20”H x 20”W x 18”D (50.8cm x 50.5cm x 45.72)

Weight

30 lbs without battery (11.2 Kg)

Appendix A – Battery Installation

In most cases, the seald lead-acid battery is installed by the user. The battery is easily installed using the provided hardware. The user will need a medium Phillips head screwdriver and a wrench to do the battery installation.

CAUTION: MAKE SURE THE RED (POSITIVE) CABLE CONNECTS TO THE POS (+) BATTERY TERMINAL AND THE BLACK (NEGATIVE) CABLE CONNECTS TO THE NEG (–) TERMINAL.

Reverse connections will cause damage and void the warranty.

NOTE: The inverter is attached to the battery compartment cover. The inverter is not separated from the cover during battery installation. The battery compartment cover is removed by unscrewing (counterclock-wise) two Phillips head screws located on the left and right forward corners of the cover. The two inverter terminal covers (red and black) are unsrcewed (counterclock-wise) and lifted off. (See Figures A1 and A2) Remove the lock washer on each terminal. The entire inverter and battery compartment cover are carefully lifted and placed on a flat stable surface. The battery compartment should contain the battery clamp adapter cable and the universal terminal adapter. Remove any items from the battery compartment. Lift the two cables out of the way so they are not down inside the battery compartment. Carefully lower the battery into the battery compartment. The terminals on the battery can be one of several types. The user should take the supplied universal connector and configure it to adapt the cable ends to the battery posts. Make sure all connections are mechanically tight. Replace the inverter and battery compartment cover. Replace the two Phillips screws and the lock washers and terminal covers. Make sure the red and black covers are on the correct terminals.

17

Image 17
Contents VEC097 Volt AC, 12 Volt DC Portable Power SupplyJump-Start Warnings and Cautions Important Safety InstructionsContents Introduction General Description Jump-Start Cables and Protection Applications Additional Key FeaturesJump-start Procedure Using ElectroMate as a Jump-Start SystemInverter Operation USE AS a 12 Volt DC Portable Power SupplyPrinciples of Operation Use with AppliancesOperating Time Powering an AC LoadPlacement of ElectroMate Operating Tips Troubleshooting the InverterCompressor/Tire Inflator Compressor Use Compressor Safety InformationInflation of tire or products with a valve stem Typical inflation timesInflating Items Without a a Tire Stem Fluorescent LampRecharging ElectroMate DC Recharge AC RechargeBattery Disposal Maintenance/Replacement PartsBattery Disposal Warnings Simultaneous Recharge and Inverter OperationAppendix a Battery Installation SpecificationsExtending Operating Time Appendix a Battery Installation Con’tAppendix B Symptom Troubleshooting Appendix CYear Limited Warranty Registration Form

VEC097 specifications

The Vector VEC097 is a highly regarded automotive emergency vehicle jump starter, designed for both consumer and professional use. It stands out as a reliable power source for various situations, combining powerful features with user-friendly technology.

One of the VEC097's primary characteristics is its robust battery capacity. With a peak current of 1,000 amps, it can jump-start a wide range of vehicles, including cars, trucks, and SUVs. This substantial power output makes it an essential tool for anyone who frequently encounters vehicle battery issues. Additionally, the device is equipped with a durable 22,000 mAh lithium-ion rechargeable battery, ensuring it can handle multiple jump-starts on a single charge.

The compact design of the VEC097 enhances its portability, making it easy to store in a trunk or under a seat. Its lightweight construction, combined with a built-in handle, allows for convenient transportation. Despite its compactness, it doesn't compromise on functionality, as it has numerous built-in features that make it stand out from competitors.

Among its key technologies is the integrated LED flashlight, perfect for emergency situations or when working in low-light environments. The flashlight also features different modes, including a strobe option, increasing its utility during roadside emergencies. Moreover, the VEC097 incorporates USB ports for charging electronic devices, allowing users to power smartphones, tablets, and other gadgets while on the go.

Safety is a priority with the Vector VEC097, which includes built-in safety protections such as short-circuit, overload, and overcharge prevention systems. These features significantly reduce the risk of damage to both the device and the vehicle’s battery. The jump cables are designed with a highly visible color for easy identification and come with strong clamps that ensure a secure connection during use.

In conclusion, the Vector VEC097 is a versatile and dependable jump starter, combining power, portability, and safety. Its impressive features make it an excellent investment for vehicle owners seeking peace of mind on the road. Whether for everyday emergencies or more significant automotive challenges, the VEC097 is engineered to deliver when it matters most, proving itself as a savvy choice for any driver.