Vector VEC097 owner manual Maintenance/Replacement Parts, Battery Disposal Warnings

Page 16

To check the battery status, press the Battery Status Display Push-button. If the Jump-Starter’s battery is fully discharged, it is recommended that the host vehicle or boat’s engine being used for recharging be left operating while the unit is being charged using the 12 Volt DC/DC method.

WARNING: DO NOT recharge main unit for more than 8 hours maximum using 12 Volt DC method. After charging, disconnect the cables and store them in the Cable Storage Area.

8.3Simultaneous Recharge and Inverter Operation

The inverter can be operated to power up to 80 watts during battery recharge. This will slow recharge, but ElectroMate can be used as a UPS system.

9.Maintenance/Replacement Parts

For replacement parts, cables, etc, contact Vector Technical Support: toll-free

(866)584-5504. ElectroMate is modular in construction. If the charger, lamp, compressor or inverter require service, unit should be returned to Vector. Note that the inverter can be shipped back mounted to the battery compartment cover. Periodically, the cables and connectors should be inspected for dam- age, corrosion, dust and dirt. If surfaces are dirty, they can be wiped clean with a cloth moistened with water and a small drop of detergent. Contacts can be wiped clean with a dry cloth.

WARNINGS: There are no user serviceable parts inside. Do not operate unit if there is any evidence of damage. The product must be returned to Vector for testing and repair. Replace any damaged cables immediately before further use.

10.Battery Disposal

Contains a maintenance-free, sealed, non-spillable, lead acid battery, which must be disposed of properly. Recycling is required. Contact your local authority for information. Failure to comply with local, state and federal regulations can result in fines or imprisonment. Sealed lead-acid battery must be recycled or disposed of properly.

Battery Disposal Warnings:

1.Do not dispose of the battery in fire as this may result in an explosion.

2.Before disposing of the battery, protect exposed terminals with heavy-duty electrical tape to prevent shorting (shorting can result in injury or fire).

3.Do not expose battery to fire or intense heat as it may explode

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Volt AC, 12 Volt DC Portable Power Supply VEC097Important Safety Instructions Jump-Start Warnings and CautionsContents Introduction General Description Jump-Start Cables and Protection Additional Key Features ApplicationsUsing ElectroMate as a Jump-Start System Jump-start ProcedureUSE AS a 12 Volt DC Portable Power Supply Inverter OperationUse with Appliances Principles of OperationPlacement of ElectroMate Powering an AC LoadOperating Time Compressor/Tire Inflator Troubleshooting the InverterOperating Tips Compressor Safety Information Compressor UseInflation of tire or products with a valve stem Typical inflation timesRecharging ElectroMate Fluorescent LampInflating Items Without a a Tire Stem AC Recharge DC RechargeMaintenance/Replacement Parts Battery DisposalBattery Disposal Warnings Simultaneous Recharge and Inverter OperationSpecifications Appendix a Battery InstallationAppendix B Appendix a Battery Installation Con’tExtending Operating Time Troubleshooting Appendix C SymptomYear Limited Warranty Registration Form

VEC097 specifications

The Vector VEC097 is a highly regarded automotive emergency vehicle jump starter, designed for both consumer and professional use. It stands out as a reliable power source for various situations, combining powerful features with user-friendly technology.

One of the VEC097's primary characteristics is its robust battery capacity. With a peak current of 1,000 amps, it can jump-start a wide range of vehicles, including cars, trucks, and SUVs. This substantial power output makes it an essential tool for anyone who frequently encounters vehicle battery issues. Additionally, the device is equipped with a durable 22,000 mAh lithium-ion rechargeable battery, ensuring it can handle multiple jump-starts on a single charge.

The compact design of the VEC097 enhances its portability, making it easy to store in a trunk or under a seat. Its lightweight construction, combined with a built-in handle, allows for convenient transportation. Despite its compactness, it doesn't compromise on functionality, as it has numerous built-in features that make it stand out from competitors.

Among its key technologies is the integrated LED flashlight, perfect for emergency situations or when working in low-light environments. The flashlight also features different modes, including a strobe option, increasing its utility during roadside emergencies. Moreover, the VEC097 incorporates USB ports for charging electronic devices, allowing users to power smartphones, tablets, and other gadgets while on the go.

Safety is a priority with the Vector VEC097, which includes built-in safety protections such as short-circuit, overload, and overcharge prevention systems. These features significantly reduce the risk of damage to both the device and the vehicle’s battery. The jump cables are designed with a highly visible color for easy identification and come with strong clamps that ensure a secure connection during use.

In conclusion, the Vector VEC097 is a versatile and dependable jump starter, combining power, portability, and safety. Its impressive features make it an excellent investment for vehicle owners seeking peace of mind on the road. Whether for everyday emergencies or more significant automotive challenges, the VEC097 is engineered to deliver when it matters most, proving itself as a savvy choice for any driver.
Top Page Image Contents