Vector VEC097 owner manual Using ElectroMate as a Jump-Start System, Jump-start Procedure

Page 8

NOTE: Other appliances may also be used with the ElectroMate as long as they do not exceed the 30 ampere DC limit of the units’ cigarette lighter type socket or the 1800 watt AC limit of the power inverter. Call Vector toll-free (866) 584-4446 for information on Vector AC and DC appliances.

READ INSTRUCTION MANUAL AND PRODUCT LABELING CAREFULLY, BEFORE USING THIS PRODUCT. FOLLOW RECOMMENDED WARNINGS, CAUTIONS, SAFETY PROCEDURES AND MANUFACTURER’S GUIDELINES FOR YOUR VEHICLE BATTERY.

IMPORTANT: This unit is delivered without a battery. The user must install a “Group 27” battery and assume that the battery is partially charged. You must then connect the battery charger and fully charge the battery before using the system. The battery must be a “Group 27”, sealed lead acid battery with terminals on top; otherwise the battery may not fit in the battery compartment. These batteries have a range of 85 to 125 Ampere Hour capacity. See Appendix A for Battery Installation information.

3.Using ElectroMate™ as a Jump-Start System

Read all Warnings, Cautions and Notes carefully before using this unit. Read and understand all WARNINGS and CAUTIONS printed at the front of this manual.

3.1Jump-start Procedure

1.Make sure the ElectroMate Safety Switch is turned OFF, enabling the reverse polarity alarms and correct polarity indicator.

2.Turn Off ignition and all accessories (radio, A/C, lights, etc.). Place vehicle in “park” and set the emergency brake.

3.Observe jump-starting negative or positive ground system, as follows: Negative ground (negative battery terminal connected to chassis) - most common.

4.Carefully unwrap the cables from the storage area starting at clamps.

5.Connect positive (+) red clamp to vehicle’s positive battery terminal.

6.Connect negative (-) black clamp to chassis or a solid, non-moving, metal vehicle component or body part - never clamp directly to negative battery terminal or moving part.

7.If polarity is correct the POLARITY CORRECT LED will light. If the polarity is incorrect, the audible REVERSE POLARITY ALARM will sound and the LED will light.

WARNING: IF REVERSE POLARITY ALARM SOUNDS, DO NOT TURN ON SAFETY SWITCH. REVERSE THE POSITION OF THE CLAMPS AND OBSERVE POLARITY LEDS. IF POLARITY CORRECT LED LIGHTS, THEN TURN ON THE SAFETY SWITCH.

8.Start vehicle (crank engine in 3 - 5 second bursts). If engine won’t start, seek help and go to step 10.

9.Leave engine running.

10.Turn OFF the Safety switch.

11.Remove clamps (disconnect the negative (black) clamp first; followed by the positive (red) clamp) and store cables and clamps.

12.Recharge ElectroMate as soon as possible.

8

Image 8
Contents Volt AC, 12 Volt DC Portable Power Supply VEC097Important Safety Instructions Jump-Start Warnings and CautionsContents Introduction General Description Jump-Start Cables and Protection Additional Key Features ApplicationsUsing ElectroMate as a Jump-Start System Jump-start ProcedureUSE AS a 12 Volt DC Portable Power Supply Inverter OperationUse with Appliances Principles of OperationOperating Time Powering an AC LoadPlacement of ElectroMate Operating Tips Troubleshooting the InverterCompressor/Tire Inflator Compressor Safety Information Compressor UseInflation of tire or products with a valve stem Typical inflation timesInflating Items Without a a Tire Stem Fluorescent LampRecharging ElectroMate AC Recharge DC RechargeMaintenance/Replacement Parts Battery DisposalBattery Disposal Warnings Simultaneous Recharge and Inverter OperationSpecifications Appendix a Battery InstallationExtending Operating Time Appendix a Battery Installation Con’tAppendix B Troubleshooting Appendix C SymptomYear Limited Warranty Registration Form

VEC097 specifications

The Vector VEC097 is a highly regarded automotive emergency vehicle jump starter, designed for both consumer and professional use. It stands out as a reliable power source for various situations, combining powerful features with user-friendly technology.

One of the VEC097's primary characteristics is its robust battery capacity. With a peak current of 1,000 amps, it can jump-start a wide range of vehicles, including cars, trucks, and SUVs. This substantial power output makes it an essential tool for anyone who frequently encounters vehicle battery issues. Additionally, the device is equipped with a durable 22,000 mAh lithium-ion rechargeable battery, ensuring it can handle multiple jump-starts on a single charge.

The compact design of the VEC097 enhances its portability, making it easy to store in a trunk or under a seat. Its lightweight construction, combined with a built-in handle, allows for convenient transportation. Despite its compactness, it doesn't compromise on functionality, as it has numerous built-in features that make it stand out from competitors.

Among its key technologies is the integrated LED flashlight, perfect for emergency situations or when working in low-light environments. The flashlight also features different modes, including a strobe option, increasing its utility during roadside emergencies. Moreover, the VEC097 incorporates USB ports for charging electronic devices, allowing users to power smartphones, tablets, and other gadgets while on the go.

Safety is a priority with the Vector VEC097, which includes built-in safety protections such as short-circuit, overload, and overcharge prevention systems. These features significantly reduce the risk of damage to both the device and the vehicle’s battery. The jump cables are designed with a highly visible color for easy identification and come with strong clamps that ensure a secure connection during use.

In conclusion, the Vector VEC097 is a versatile and dependable jump starter, combining power, portability, and safety. Its impressive features make it an excellent investment for vehicle owners seeking peace of mind on the road. Whether for everyday emergencies or more significant automotive challenges, the VEC097 is engineered to deliver when it matters most, proving itself as a savvy choice for any driver.