Marantz SM-1151 manual Rear Panel

ENGLISH

NAMES AND FUNCTIONS OF PARTS

REAR PANEL

						G			F
									AC IN
UNBALANCED INPUT						AMP MODE	SPEAKER SYSTEMS
	R			L		STEREO			MODEL NO. SM-11S1
						BTL
				BTL		R CH	1	L CH
			BALANCED INPUT
	PUSH	R		PUSH	L
	3			3			BTL
2		1	2		1
				BTL					REMOTE POWER CONTROL
									TRIGGER IN	ON
							2			OFF
						R CH		L CH

A B C D E

AUNBALANCED INPUT Jack

These jacks are for connecting to the unbalanced output jacks of a control amplifi er. In BTL mode, the Lch input terminal is used.

BBALANCED INPUT Jacks

These jacks are for connecting to the balanced output jacks of a control amplifi er. In BTL mode, the Lch input terminal is used.

E REMOTE POWER CONTROL ON/OFF

Switch

ON: Set to control this unit’s power ON/OFF in sync with the Marantz SC-11S1 control amplifi er ON/OFF control.

OFF: Set to use the POWER ON/OFF switch on the front panel of the unit to switch the unit’s power ON/OFF.

CSPEAKER SYSTEMS Output Terminals

These jacks are for connecting to a speaker system. You can connect 2 speaker systems to the SM-11S1, SPEAKER SYSTEM 1 and 2. Speaker output can be turned ON/OFF from the SPEAKERS 1 / 2 buttons on the front panel.

When using BLT mode, connect the speaker + side to the Lch + jack, and the speaker – side to the Rch + jack.

DREMOTE POWER CONTROL Jacks

(TRIGGER IN)

This jack controls this unit’s power ON/OFF in sync with the Marantz SC-11S1 control amplifi er ON/OFF control. Connect to the SC-11S1 TRIGGER OUT jack using a commercially available cable.

For more information on REMOTE POWER CONTROL, see pg. 20.

FAC IN Power Cable Connection Socket

Connect this socket to the power outlet using the included power cable.

GAMP MODE Switch

STEREO: Set to use the SC-11S1 as an ordinary stereo power amplifi er.

BTL: Set to connect a stereo amp by BTL and use this unit as a monaural power amp.

For more information on AMP MODE, see pg. 19.

Caution:

Always make sure that the power is OFF before switching this switch.

6