Names and Functions of Parts, Front Panel

ENGLISH

NAMES AND FUNCTIONS OF PARTS

FRONT PANEL

	METER
DISPLAY	MODE
SPEAKERS	BALANCED
1	BALANCED
	STANDBY
SPEAKERS	UN-
2	BALANCED
	POWER ON/OFF

u i o	q	w	e r t
q POWER ON/OFF Switch		t METER MODE Button
This switch turns power to the SM-11S1 ON and OFF.		This button changes the display to digital power meter
When pressed, power is activated and the blue indicator		display mode. For more information on HOW TO USE
in the display w lights up. Pressing the switch again turns		THE METER BUTTON (DIGITAL POWER METER), see
the power OFF.		pg. 18.

wDisplay

The monitor displays the output power to the speakers, and setting status of the various setting modes.

eUNBALANCED Input Selection Button

This button switches the input signal from the UNBALANCED terminal on the rear panel ON/OFF. Press this button for 3 seconds or more to set the gain settings for the input signal from the UNBALANCED terminal. For instructions on BALANCED INPUT /

UNBALANCED INPUT GAIN SETTING, see pg. 18.

rBalanced Input Selection Button

This button switches the input signal from the BALANCED terminal on the rear panel ON/OFF.

Press this button for 3 seconds or more to set the gain settings for the input signal from the BALANCED terminal. For instructions on BALANCED INPUT / UNBALANCED

INPUT GAIN SETTING, see pg. 18.

yIllumination Lamp

The illumination lamp casts a blue light over the switches and buttons.

It can be turned ON and OFF with the DISPLAY button. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see pg. 19.

uDISPLAY Button

This button turns the display and side illumination ON and OFF. For instructions on HOW TO OPERATE THE SIDE ILLUMINATION, see pg. 19.

iSPEAKERS 1 Button

This button switches the speaker output signal from the SPEAKERS 1 terminal on the rear panel ON/OFF.

oSPEAKERS 2 Button

This button switches the speaker output signal from the SPEAKERS 2 terminal on the rear panel ON/OFF.