Marantz SM-1151 manual Remote Power Control, Set to on

ENGLISH HOW TO USE AND SET FEATURES

REMOTE POWER CONTROL

By connecting this unit to a Marantz SC-11S1 stereo control amplifier using the remote power control connection, the power controls of this unit are operated in sync with the SC-11S1 power ON/OFF controls.

The SC-11S1 has two trigger output terminals, therefore two SM-11S1s can be connected to one SC-11S1.

1.Prepare the correct number of double-ended mini plug audio connection cables for the number of SM-11S1s to be connected. Either of the following types of connection cables are adequate.

Caution:

Do not use connecting cables that contain resistance.

•Monaural miniplug ⇔ monaural miniplug connecting cable

•Stereo miniplug ⇔ stereo miniplug connecting cable

SC-11S1

AC IN

TRIGGER OUT

1 2

REMOTE POWER CONTROL

SM-11S1

AC IN

REMOTE POWER CONTROL

TRIGGER IN	ON
	OFF

2.Check that the power to the unit and SC-11S1 that will be connected to it are both OFF.

3.After completing the connections shown below, switch the remote power control ON/OFF switch on the rear panel of the unit to ON.

4.Press the POWER ON/OFF switch on the unit to switch to standby mode.

5.In this condition, press the POWER ON/OFF switch on the SC-11S1, and the power of the SM-11S1 will switch ON in sync.

TRIGGER OUT

1 2

REMOTE POWER CONTROL

REMOTE POWER CONTROL

ON

OFF

TRIGGER IN

SM-11S1

AC IN

REMOTE POWER CONTROL

TRIGGER IN	ON
	OFF

Set to ON

REMOTE POWER CONTROL

ON

OFF

TRIGGER IN

Set to ON

20