Mantis E" System owner manual

Page 6

WARNING – DANGER

IMPROPER ASSEMBLY OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY. MAKE SURE TO FOLLOW ALL INSTRUCTIONS CAREFULLY.

IF YOU HAVE ANY QUESTIONS, CONTACT

MANTIS CUSTOMER SERVICE.

34.Always disconnect power cord from power source:

a.Before cleaning blockages.

b.Before checking, cleaning or working on the cutting portion of the unit.

c.After striking a foreign object: inspect the cutting part for damage and make repairs before restarting and operating the unit.

d.If machine starts to vibrate abnormally (check immediately).

e.Whenever you leave the unit.

35.Securing the extension cord.

Bend the extension cord about 15 inches from the plug end. Push that bend through the oblong opening in the back of the handle. Then loop the bend under the cord retaining clips as shown. This will prevent the extension cord from detaching from the hedge trimmer plug.

5

Image 6
Contents Edger E System Table of Contents Important Information Safety and WarningsSafety Decals General Safety Rules For safe operationsImportant Note Page Assembling the Edge Trimmer Attaching the Edger to Power Head assembly Balancing and Depth AdjustmentReplacement Blade Installation Trimming Techniques StorageService Maintenance Guide HoursEdger E System Exploded View Edger E System Parts List Mantis