System Configuration
The RESTORE PARAMETERS function allows you restore the currently selected Effect to its factory preset state.
When you select this function, you will be prompted to reconsider erasing your changes. — If you don’t want to erase your versions, press DONE to exit the menu. Pressing SELECT in response to the displayed query will restore all of the factory preset values to the Effect.
Restoring the original parameter values
of an Effect
EDIT EFFECT NAME allows you to assign a new name, of as many as 13 characters, to your Effect. With EDIT EFFECT NAME highlighted, press SELECT to display the current name with a cursor indicating which character position can be modified. SELECT moves the cursor to a new position. ▲ and▼ scroll through the available character set. Press DONE to save the new name.
Naming your custom Effect
RESTORE EFFECT NAME allows you to restore the original factory name of an Effect, without changing any of your modified parameter settings. When you select this function, the message PRESS SELECT TO RESTORE EFFECT NAME allows you to reconsider erasing your custom name. — If you don’t want to erase your version, press DONE to exit the menu. Pressing SELECT in response to the displayed query will restore the factory preset name.
Note: The following effects cannot be assigned custom names: PRO LOGIC, THX CINEMA, LOGIC 7, DOLBY DIGITAL, THX 5.1, 5.1 LOGIC 7, DTS FILM, DTS THX, DTS LOGIC 7.
Selecting EFFECT ONLY allows you to listen to only the effects added by the
This control allows you to adjust the front/rear balance for the current effect. This control can also be accessed on the remote by pressing and holding the Shift button and using ▲ to move the balance point forward, and ▼ to move it backward.
Restoring the original Effect name
Listening to only the
Front/Back Fader
33