DTS Effects and Parameters
This effect provides THX 5.1 Cinema enhancements for film soundtracks DTS THX recorded in the DTS format. This processing compensates for the acoustical
differences between large mixing theaters and the typically smaller home environment.
When SIDE and REAR speakers are selected in the SPEAKER CONFIGU- RATION menu, SURROUND EX is automatically set to ON for proper decoding of SURROUND EX soundtracks.
Parameter | Initial Value | Range |
SURROUND EX (V4 only) | ON | ON, OFF |
ON | ON, OFF | |
LFE MIX LEVEL | +0.0dB | |
SUBWOOFER LVL | +00dB | OFF, |
CUSTOM |
|
|
BASS ENHANCE derives stereo bass to provide low frequencies that are noticeably less localizable and more spacious in the playback room.
Note that results will vary depending on room acoustics and the low frequency capacity of the surround speakers. As side and/or rear speakers are used for bass enhancement, the effectiveness is improved with speakers capable of reproducing reproducing low frequencies (LARGE). Using speakers that are not capable of producing low frequencies (<80Hz) may cause damage to them.
CENTER MIX adjusts the level of the center channel applied to the
CENTER DLY SAMPLES adjusts the time offset of the center channel. The appropriate value is +0 unless you know that the center channel is not properly timed, as well as the amount by which it is off.
MASTER LEVEL adjusts the output level of the downmix. This control should be set to +5dB unless the LFE is very heavy, in which ase the level should be reduced.
LFE MIX LEVEL allows separate level attenuation of the LFE channel, which is ultimately mixed to the subwoofer output. As the bass from as many as five other channels is added to the LFE, it can significantly raise subwoofer output levels — and create the risk of damage to a system. Careful adjustment of this parameter will allow you to achieve proper tonal balance and reduce the risk of damage.
DTS Effect Parameters
53