Part One Planning, Part Two Prewire | Knoll Q450RS instruction

INSTALLATION

Tools You Will Need

These tools are specific to Q450rs and more may be required depending on speakers and peripherals used.

Screwdriver

A small flat head screw driver with a blade that is about 3.5mm (1/4”) is ideal. This is for terminating the speakers into the Q450rs speaker or Phoenix connector. Too big won’t fit in the opening, too small won’t allow for enough torque for a good seating of the speaker wire.

Wire Strippers

Suitable for stripping speaker wire.

Multi-meter or Impedance Meter

This is required to avoid damage to Q450rs and the speakers and will save much time and frustration should a speaker wire be damaged during installation. Do it.

Cat5/RJ45 Crimper Tool

This must be top quality. The ‘Ideal’ by ‘Telemaster’ is a very good choice. Most calls to tech support are a result of poor connections caused by an inferior crimper tool used for cat5 termination.

Cat5 Tester

Until we figure out how to see electricity, we need a way to ensure that it’s being transported correctly. A cat5 tester that shows that not only continuity of the wire, but shows that they are going to the correct pins. This is very useful and highly recommended.

Labeling Medium

Some method to identify the different cables from one another and apart from other systems/networks. During installation other trades people can move or even remove the ends of long wires. Two labels on both ends can offer a little redundancy.

Note: It is important you know where you’ll run

the various wires required operate Q450rs. You cannot run a cat5 or speaker cable parallel to a high voltage AC mains cable. This may cause problems with the operation of Q450rs. Q450rs needs to be a safe distance, about 1m (3’) from any large AC motors, like in an air conditioner or fridge/freezer, or breaker panels.

INSTALLATION PROCEDURE

Installing the Q450rs is intended to be a relatively easy procedure with no programming required.

Part One - Planning

Before installing we recommend you make an installation plan. This involves deciding where the speakers will go, and if you’re intending to, where to place the local zone inputs, or BIX as we call them and of course the various music sources. There are up to four pairs of speaker wire (one pair per zone) and up to four cat5 for the BIX/BIB’s.

Part Two - Prewire

Prewiring is a very important step. The effort you put into planning should make this step easier. When running wire, leave an extra 1m (3’) on both ends. Terminate all Cat5 wires with RJ45 connectors.

Part Three – Installation or Trim Out

You should now install the speakers and install the wires in them. Take care to ensure the speaker wire polarity is correct (in phase), the wire is neat and no wire fibers are outside the connectors.

At the Q450rs terminate the speaker wires with the supplied connector. Check each speaker circuit for shorts and proper impedances. Take extra care at this step to ensure your twisted pairs are correctly routed and that the phasing is correct. A fault here can seriously damage Q450rs and its peripherals. Check this three times!

Mount the Q450rs. Plug in all connectors except for the powers supply unit (PSU). Double check that the connectors are routed to the correct Q450rs terminals.

Plug in a known working audio source directly to Q450rs. Preferably, use a source input that is not being used for a BIX. Plug in the Q450rs power supply. Check Q450rs to see that the power LED is illuminated. Press play on your known working audio source and head to your closest zone.

Select the audio source on your control device you activated in previous step. Turn up volume and listen for signal. Check signal for distortion or clipping. Move to next zone, rinse, repeat until all zones are active.

Bring a known working audio source to BIX locations to test for signal. After completing this test, perform the same test on BIX/BIB in other zones. Grab a soda and pat yourself on the back. Throw on a tune and enjoy your hard work.

Q450RS specifications

The Knoll Q450RS is a standout workstation designed for modern office environments, where flexibility, functionality, and aesthetics converge. This desk exemplifies the blend of advanced technology and ergonomic design, catering to the diverse needs of today’s workforce.

One of the main features of the Knoll Q450RS is its adjustable height mechanism. This innovative feature allows users to seamlessly transition between sitting and standing positions, promoting healthier work habits and reducing the risk of musculoskeletal disorders. With a touch of a button, employees can customize their workstation to suit their personal comfort levels, fostering increased productivity and well-being.

The Q450RS also incorporates a sleek and modern design that complements various office layouts. Its clean lines and minimalist aesthetic make it an attractive addition to any workspace. The desk is available in a variety of finishes, enabling organizations to choose materials that align with their branding and interior design preferences. This attention to style ensures that the Q450RS does not only serve a functional purpose but also enhances the overall ambiance of the workplace.

In terms of technology, the Knoll Q450RS is equipped with integrated cable management solutions, keeping workspaces tidy and organized. This feature is essential in today’s digital age, where multiple devices and charging needs can quickly lead to clutter. The thoughtful integration of power outlets ensures that users can easily charge their devices without compromising on space or accessibility.

Another characteristic that sets the Q450RS apart is its durability. Constructed from high-quality materials, this workstation is designed to withstand the demands of daily use. The robust build ensures longevity, making it a sustainable investment for any office environment.

The Q450RS is also designed with user collaboration in mind. Its spacious surface area accommodates multiple devices and can easily support collaborative projects, whether in an open office or shared workspace. This adaptability highlights the desk’s role in fostering teamwork and innovation.

In conclusion, the Knoll Q450RS is a dynamic and versatile workstation that combines ergonomic functionality with modern design. Its adjustable height, cable management solutions, and durable construction make it an ideal choice for contemporary work settings. As organizations continue to prioritize employee health and collaboration, the Q450RS stands out as a forward-thinking solution for the modern workplace. With the Knoll Q450RS, companies can enhance productivity while creating an inspiring work environment.