Land Pride PR2596, PR2572 manual Table of Contents

Page 2

Table of Contents

Important Safety Information . . . . . . . . . . .1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1

Look For The Safety Alert Symbol . . . . . . . . . . . . . 1

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction . . . . . . . . . . . . . . . . . . . . . . . .7

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 7

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 7

Serial Number Plate . . . . . . . . . . . . . . . . . . . . . 7

Further Assistance . . . . . . . . . . . . . . . . . . . . . . 7

Section 1: Assembly & Set-up . . . . . . . . .8

Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . 8

Gauge Wheel and Frame Assembly . . . . . . . . . . . 8

Tines and Tine Frame Assembly . . . . . . . . . . . . . . 9

Shearing Hardware Assembly . . . . . . . . . . . . . . . 11

Tine Lift Assembly . . . . . . . . . . . . . . . . . . . . . . . . 11

Angling Assembly . . . . . . . . . . . . . . . . . . . . . . . . 11

Tractor Hookup . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Driveline Installation . . . . . . . . . . . . . . . . . . . . . . . 12

Section 2: Operating Procedures . . . . . .13

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Operating Checklist . . . . . . . . . . . . . . . . . . . . . . . 13

Operating Instructions . . . . . . . . . . . . . . . . . . . . . 13

Section 3: Adjustments . . . . . . . . . . . . . .14

Setting Depth and Leveling . . . . . . . . . . . . . . . . . 14

Leveling Left-To-Right . . . . . . . . . . . . . . . . . . . 14

Leveling Front-To-Rear . . . . . . . . . . . . . . . . . . 14

Setting The Depth . . . . . . . . . . . . . . . . . . . . . . 14

Drive Chain Adjustment . . . . . . . . . . . . . . . . . . . . 14

Material Control Blade Adjustment . . . . . . . . . . . . 15

Section 4: Optional Equipment . . . . . . . .16

Section 5: Maintenance & Lubrication . .17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Drive Chain Maintenance . . . . . . . . . . . . . . . . . . . 17

Sprocket and Chain Replacement . . . . . . . . . . . . 17

Bottom and Top Seal Installation . . . . . . . . . . . . . 18

Friction Clutch PTO . . . . . . . . . . . . . . . . . . . . . . . 18

2-Plate Slip Clutch . . . . . . . . . . . . . . . . . . . . . . . . 19

Disassembly . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Lubrication Points . . . . . . . . . . . . . . . . . . . . . . . . 20

Double Joint Zerks . . . . . . . . . . . . . . . . . . . . . 20

Driveline U-Joints . . . . . . . . . . . . . . . . . . . . . . 20

Driveline Shaft . . . . . . . . . . . . . . . . . . . . . . . . . 20

Gearbox Gear Lube . . . . . . . . . . . . . . . . . . . . . 20

Pivot Bearings . . . . . . . . . . . . . . . . . . . . . . . . . 21

Gauge Wheel Spindle . . . . . . . . . . . . . . . . . . . 21

Gauge Wheel . . . . . . . . . . . . . . . . . . . . . . . . . 21

Drive Chain . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Tine Lift Arms . . . . . . . . . . . . . . . . . . . . . . . . . 22

Gauge Wheel Spindle . . . . . . . . . . . . . . . . . . . 22

Section 6: Specifications & Capacities .23

Section 7: Troubleshooting . . . . . . . . . .24

Section 8: Appendix . . . . . . . . . . . . . . . .25

Torque Values Chart . . . . . . . . . . . . . . . . . . . . . . 25

Tire Inflation Chart . . . . . . . . . . . . . . . . . . . . . . . . 25

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

© Copyright 2006 All rights Reserved

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

PR2572 & PR2596 Powered Rakes 314-132M

6/06/06

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Powered Rakes Table of Contents Safety at All Times Transport Machinery Safely Use Safety Lights and DevicesPractice Safe Maintenance Keep Riders Off MachineryWear Protective Equipment Tire SafetyPrepare for Emergencies Avoid High Pressure Fluids Hazard818-130C 818-229C 818-230C818-254C 818-255C 818-540C818-552C 838-094CUsing This Manual Owner AssistanceGauge Wheel and Frame Assembly Tractor RequirementsTines and Tine Frame Assembly Lift Arm Location and Hose Routing Tine Lift Assembly Shearing Hardware AssemblyAngling Assembly Tractor HookupDriveline Installation Operating Instructions Operating ChecklistTransporting Setting The Depth Setting Depth and LevelingDrive Chain Adjustment Leveling Left-To-RightMaterial Control Blade Adjustment Optional Equipment Sprocket and Chain Replacement MaintenanceDrive Chain Maintenance StorageBottom and Top Seal Installation Friction Clutch PTOAssembly Disassembly Step Plate Slip ClutchDouble Joint Zerks Lubrication PointsRequired Driveline U-JointsGauge Wheel Pivot BearingsGauge Wheel Spindle Drive ChainTine Lift Arms PR2572 & PR2596 Powered Rake PR2572 PR2596Troubleshooting Problem SolutionTireSize Inflation Torque Values ChartTire Inflation Chart In-tpi26 PR2572 & PR2596 Powered Rakes 314-132M Driveline Slip-Clutch Friction discs Considered wear items WarrantyOverall Unit and Driveline One year Parts and Labor Corporate Office P.O. Box Salina, Kansas 67402-5060 USA

PR2572, PR2596 specifications

Land Pride PR2596 and PR2572 are premier models in the Land Pride product line, known for their exceptional performance and durability in the field of agricultural and landscaping equipment. These finishing mowers are designed to meet the demands of professionals looking for high-quality results with ease of use and reliability.

One of the standout features of the PR2596 and PR2572 is their cutting width. The PR2596 boasts a generous 96-inch cutting width, while the PR2572 offers a more compact 72-inch option. This versatility allows operators to tackle various mowing tasks, from large commercial properties to smaller residential lawns, ensuring a clean and precise cut every time. The mowers are equipped with a floating deck that follows the contours of the ground, ensuring that uneven terrain is no obstacle for a flawless finish.

The construction of these mowers is robust, built with heavy-duty materials that withstand the rigors of daily use. The steel frame and deck provide strength and longevity, while the reinforced edges prevent damage from contact with obstacles like rocks and tree stumps. Additionally, the powder-coated finish enhances durability by resisting rust and corrosion, making these mowers perfect for long-term outdoor use.

Land Pride's PR2596 and PR2572 feature a rear discharge design, which ensures that clippings are evenly dispersed across the lawn. This prevents clumping and promotes healthier grass growth by returning nutrient-rich clippings to the soil. The adjustable cutting height, ranging from 1 to 4 inches, offers the flexibility needed for various grass types and desired lawn appearances.

Another key technology in these models is the innovative blade system. The mowers are fitted with high-quality blades designed for efficiency and longer-lasting sharpness. This not only ensures a clean cut but also reduces the frequency of blade maintenance and replacement, saving time and costs for operators.

For user comfort, the PR2596 and PR2572 are designed with easy-to-use controls and settings. The quick-attach mounting system simplifies connecting the mower to tractors, while the operator-friendly design enhances maneuverability and reduces operator fatigue during long mowing sessions.

In summary, the Land Pride PR2596 and PR2572 finishing mowers represent the pinnacle of performance and efficiency in landscape management. Their combination of durable construction, advanced mowing technologies, and user-centric design makes them an outstanding choice for those seeking reliable, high-quality equipment to meet their mowing needs.
Top Page Image Contents