Land Pride PR2596, PR2572 manual 818-130C 818-229C, 818-230C

Table of Contents

Important Safety Information

Land Pride

Safety Labels

Your Powered Rake comes equipped with all safety labels in place. They were designed to help you safely operate your implement. Read and follow their directions.

1.Keep all safety labels clean and legible.

2.Replace all damaged or missing labels. To order new labels go to your nearest Land Pride dealer or visit our dealer locator at landpride.com.

3.Some new equipment installed during repair requires safety labels to be affixed to the replaced component as

specified by Land Pride. When ordering new components make sure the correct safety labels are included in the request.

4.Refer to this section for proper label placement. To install new labels:

a.Clean the area the label is to be placed.

b.Spray soapy water on the surface where the label is to be placed.

c.Peel backing from label. Press firmly onto the surface.

d.Squeeze out air bubbles with the edge of a credit card.

818-130C

Caution: 540 RPM

818-229C

Amber Reflector (Both Sides)

818-230C

Red Reflector (Both Sides)