Assembly Instructions CON’T, Tractor HOOK-UP

1/29/04

ASSEMBLY INSTRUCTIONS (CON’T.)

GRASS CHUTE ASSEMBLY -

Refer to the parts illustration on page 14:

1.Loosen upper pivot bolt (#9) and remove lower thumb screw (#17).

2.Hinge chute down and install thumb screw and flat

washer (#13) and (#17). When set at position desired, tighten down upper pivot bolt and lock nut (#9) and (#10). DO NOT tighten completely. Allow chute to hinge. Lock down lower thumb screw with flat washer (#13) and (#17).

DO NOT in any condition operate mower with chute removed from this position.

TRACTOR HOOK-UP

1.Be certain that tractor draw bar will not interfere.

Move draw bar ahead or remove if required. Draw bar should also be checked for clearance when unit is being raised for the first time.

2.Align lower link arms of tractor to hitch clevises on mower. Insert lower hitch pins into lower ball swivels and attach lynch pins.

3.Referring to fig. 1, attach tractor top link to upper floating hitch on mower with pin supplied. Secure with lock pin.

4.Adjust the tractor top link in or out to place the upper hitch pin vertically above the lower hitch pins as shown in fig. 1(below) to allow mower flotation.

POWERSHAFT INSTALLATION

1.Slide powershaft end with extended safety cone over splined shaft of the gearbox and secure with at- taching device.

2.Slide powershaft over the tractor’s splined PTO shaft and secure with locking device of powershaft.

3.Powershaft should now be moved back and forth to insure that it is secure on the PTO shaft of the tractor and mower gearbox.

4.Should the powershaft require shortening:

a.Hold the half-shafts next to each other in the shortest working position and mark them.

b.Shorten inner and outer guard tubes equally.

c.Shorten inner and outer sliding profiles by the same length as the guard tubes.

d.Proper overlap is a minimum of one-half the length of each tube, with both tubes being of equal length.

e.Round off all sharp edges and remove burrs. Grease sliding profiles.

!	CAUTION! TRACTOR PTO SHIELD AND ALL MOWER GUARDS MUST BE IN
!	PLACE AT ALL TIMES DURING OPERATION!
	FLOATING AND FRONT TO BACK HITCH ADJUSTMENTS

The 3-point hitch system on this mower has been de- signed for front to back flotation when mowing on un- even terrain. The lower 3-point hitch blocks also are adjustable from front to back for additional field float and tractor clearance. The lower hitch blocks have a large pivot pin and a smaller locking pin, page 14 (#4) & (#5). When operating a mower equipped with four gauge wheels do not use lock pin (#4) unless desired for trans- port.

The mower can be operated with hitch blocks in either position. Depending upon the use of front gauge wheels, the lower hitch blocks can be used without the locking pin. If mower is not equipped with front gauge wheels and leveling chains are used, the locking pin should be installed. The lower hitch blocks and top link rear braces can be adjusted front to back as shown in fig. 1.

10479

Fig. 1

FD2548 specifications

The Land Pride FD2548 is a robust and dependable flail mower designed for professional landscaping, agriculture, and non-commercial use. This mower stands out for its ability to handle a variety of mowing applications with efficiency and precision. Boasting a cutting width of 48 inches, the FD2548 is engineered to tackle tough vegetation and maintain a clean finish across diverse terrains.

One of the main features of the Land Pride FD2548 is its heavy-duty construction. It is built with high-quality materials, ensuring durability and longevity even under rigorous conditions. The mower is equipped with a rugged frame that provides stability and strength during operation. The rotating flail blades are particularly noteworthy; they are designed to efficiently chop through dense grass, weeds, and brush, making it an ideal choice for overgrown areas.

The FD2548 incorporates advanced mower technology to enhance cutting performance. Its flail blade system utilizes multiple blades that rotate around a horizontal shaft, delivering a finely shredded finish that decomposes quickly, enriching the soil. The blades are replaceable, allowing users to easily maintain optimal performance and efficiency. This mower also features adjustable cutting height settings, providing flexibility to achieve the desired grass length while accommodating various landscaping needs.

Another characteristic that sets the Land Pride FD2548 apart is its compatibility with multiple tractor models. It features a category 1 quick hitch system, allowing for easy attachment and detachment without the need for additional tools. This versatility makes it a favorite among farmers, landscapers, and large property owners, enabling users to switch between implements quickly and efficiently.

Additionally, the FD2548 is designed with operator safety in mind. It includes features such as a rear discharge design that prevents clippings from being ejected towards the operator, ensuring a safer working environment. The mower is also relatively easy to service, with accessible grease fittings and a user-friendly design that simplifies routine maintenance.

In summary, the Land Pride FD2548 flail mower excels in durability, versatility, and cutting performance. Its heavy-duty construction, advanced flail technology, adjustable height settings, and safety features make it an excellent choice for anyone looking to maintain their property effectively and efficiently. Whether you're managing a large farm or tending to a residential landscape, the FD2548 is engineered to deliver results with reliability and precision.