Cutting Height Adjustment, Transporting

1/29/04

CUTTING HEIGHT ADJUSTMENT

1.Using the tractor, raise the mower off the ground and support under it with secure blocking so not to let the mower drift down during maintenance.

2.Holding wheel and yoke assembly up, remove quick- lock pin from top of gauge wheel spindle. Position full length spacers and half spacer as required. All spacers on top of spindle tube allows for approximately 1" cut-

ting height. Adjustments range from 1" to a maximum of 5 1/2" in 1/2" increments. Refer to "Leveling Mower" on page 6.

NOTE: If equipped with only rear gage wheels, the mower must be leveled front to rear each time this ad- justment is made.

!CAUTION! ENGAGE PARKING BRAKE, SHUT OFF TRACTOR, REMOVE KEY AND DISENGAGE PTO BEFORE MAKING ANY HEIGHT ADJUSTMENTS!

TRANSPORTING

IMPORTANT: Always disengage PTO before rais- ing the mower to transport position.

1.When raising the mower to the transport position, be sure that powershaft does not contact tractor or mower. Adjust the tractor’s 3-point hitch lift height so that the PTO shaft does not contact mower deck.

2.Be sure to reduce tractor ground speed when turn- ing; and, leave enough clearance so the mower does

not contact obstacles such as buildings, trees or fences.

3.Select a safe ground travel speed when transporting from one area to another. When traveling on roadways, transport in such a way that faster moving vehicles may pass you safely.

4.When traveling over rough or hilly terrain, shift trac- tor to a lower gear.

!CAUTION! WHEN TRAVELING ON PUBLIC ROADS, WHETHER AT NIGHT OR DURING THE DAY, USE ACCESSORY LIGHTS AND DEVICES FOR ADEQUATE WARNING TO OPERATORS OF OTHER VEHICLES. COMPLY WITH ALL FEDERAL, STATE, AND LOCAL LAWS.

MOWING INSTRUCTIONS AND ADJUSTMENTS

1.Clear the area to be mowed of objects and debris that might be picked up and thrown by the mower blades.

2.Grass is best cut when it is dry. Mowing wet grass can cause plugging resulting in grass clumps behind the mower.

3.Grass should be mowed frequently as shorter clip- pings deteriorate faster.

4.If mowing extremely tall grass, it is best to raise

5.cutting height and mow the area, then lower cutting height and mow a second time at the desired height.

6.This mower is equipped with an adjustable grass dis- charge chute. Adjustments can be made by loosening the bolts on the front and rear of mower chute. With the mower chute in the raised operating position, grass is expelled away from the mower for a more even distribu- tion of grass clippings. Lowering the mower chute will decrease the distance the grass is discharged from the mower.

!CAUTION! WHEN MOWING IN SANDY SOIL AREAS, WEAR MAY OCCUR TO YOUR MOWER BLADES CAUSED FROM SAND EROSION. FREQUENT INSPECTION SHOULD BE MADE AND BLADES REPLACED IF DAMAGED.

FD2548 specifications

The Land Pride FD2548 is a robust and dependable flail mower designed for professional landscaping, agriculture, and non-commercial use. This mower stands out for its ability to handle a variety of mowing applications with efficiency and precision. Boasting a cutting width of 48 inches, the FD2548 is engineered to tackle tough vegetation and maintain a clean finish across diverse terrains.

One of the main features of the Land Pride FD2548 is its heavy-duty construction. It is built with high-quality materials, ensuring durability and longevity even under rigorous conditions. The mower is equipped with a rugged frame that provides stability and strength during operation. The rotating flail blades are particularly noteworthy; they are designed to efficiently chop through dense grass, weeds, and brush, making it an ideal choice for overgrown areas.

The FD2548 incorporates advanced mower technology to enhance cutting performance. Its flail blade system utilizes multiple blades that rotate around a horizontal shaft, delivering a finely shredded finish that decomposes quickly, enriching the soil. The blades are replaceable, allowing users to easily maintain optimal performance and efficiency. This mower also features adjustable cutting height settings, providing flexibility to achieve the desired grass length while accommodating various landscaping needs.

Another characteristic that sets the Land Pride FD2548 apart is its compatibility with multiple tractor models. It features a category 1 quick hitch system, allowing for easy attachment and detachment without the need for additional tools. This versatility makes it a favorite among farmers, landscapers, and large property owners, enabling users to switch between implements quickly and efficiently.

Additionally, the FD2548 is designed with operator safety in mind. It includes features such as a rear discharge design that prevents clippings from being ejected towards the operator, ensuring a safer working environment. The mower is also relatively easy to service, with accessible grease fittings and a user-friendly design that simplifies routine maintenance.

In summary, the Land Pride FD2548 flail mower excels in durability, versatility, and cutting performance. Its heavy-duty construction, advanced flail technology, adjustable height settings, and safety features make it an excellent choice for anyone looking to maintain their property effectively and efficiently. Whether you're managing a large farm or tending to a residential landscape, the FD2548 is engineered to deliver results with reliability and precision.