Land Pride FD2548 manual Operating Instructions, Operating Check List, Specifications

Page 9

1/29/04

OPERATING INSTRUCTIONS

BEFORE beginning to mow, the following inspection should be performed:

1.Check oil level in gearbox. Refer to "Maintenance" & "Lubrication" on page 9 of this manual.

2.Check that all plugs in gearbox have been replaced and tightened properly.

3.Be sure all mower blades, bolts and nuts are tight.

4.Be certain all guards and shields are in place and se- cure.

5.Grease PTO shaft and all other grease fittings.

6.Clear the area to be mowed of rocks, branches and other foreign objects.

7.Lower mower to ground. Set tractor throttle at ap- proximately 1/4 open. Engage PTO to start blades ro- tating.

8.Operate with 540 rpm PTO tractor.

9.At first begin mowing at a slow forward speed and shift up until the desired speed is achieved - maintaining

540PTO rpm.

10.Mower blades will cut better at a faster blade speed than at reduced throttle.

11.Mowing should not be done in wet conditions as grass will stick to blades and the under side of mower deck.

12.After mowing the first 50 feet, stop and check to see that the mower is adjusted properly.

13.DO NOT make sharp turns or attempt to back up while mower is on the ground.

14.DO NOT engage PTO with mower in the fully raised position. DO NOT engage PTO at full throttle.

OPERATING CHECK LIST

Proper servicing and adjustments is the key to the long life of any machine. With careful and systematic inspec- tion of the mower, you can avoid costly maintenance, time and repair.

!For Safety reasons, each maintenance opera- tion must be performed with the tractor’s PTO dis- engaged, the mower lowered completely, tractor engine shut off and ignition key removed.

SERVICE DAILY:

1.Grease the PTO u-joint.

2.Check that all bolts are tight.

LUBRICATE EVERY 50 HOURS OF OPERATION:

1.With the mower on level ground, check the oil level in the gearbox by removing the plug in the side of the box. The oil should reach the plug hole. Fill if neces- sary with SAE 90 oil and retighten both plugs. DO NOT OVERFILL! Should your gearbox require service, take it to your LAND PRIDE dealer.

IMPORTANT: Mower should be level when check- ing or adding oil to the gearbox!

SPECIFICATIONS

CUTTING WIDTH

48"

OVERALL WIDTH

58 1/2"

HEIGHT

36"

LENGTH (4 WHEEL)

56"

WEIGHT

399#

CUTTING HEIGHT

1"-5 1/2"

 

1/2" Increments

DECK MATERIAL

10 Gauge

THICKNESS

 

BLADES - 2

1/4" X 2 1/2" X 24 7/8"

 

Heat Treated

 

Alloy Steel

BLADE OVERLAP

1 1/2"

BLADE TIP SPEED

15,745FPM

BLADE SPINDLES

........................................Greasable

HITCH

Cat. 1 Floating

 

Clevis

GAUGE WHEELS:

..........................................Castered

1 REAR 2 FRONT

10 1/4 x 3 1/4

 

Solid Tire

GAUGE WHEELS:

..........................................Castered

2 REAR 2 FRONT

10 1/4 x 3 1/4

OPTIONAL

Solid Tire

CASTER WHEEL

1" Diameter With

SPINDLE

Greasable Bushing

DRIVE TRAIN

540 RPM PTO

 

Gearbox

 

2.5:1 Ratio

 

Beveled Gears

 

Cast Iron Housing

 

Single V-Belt

GRASS CHUTE

Hinged-Adjustable

8

Image 9
Contents Spindle Grooming Mower Introduction Table of ContentsSafety Rules Safety Decals Rotating Cutting Blade Safety Rules CON’TAssembly Instructions NUT & Bolt Torquing ChartTractor Requirements Gear BOX Gear LubePowershaft Installation Assembly Instructions CON’TFloating and Front to Back Hitch Adjustments Tractor HOOK-UPLeveling the Mower Front to RearSide to Side Cutting Height Adjustment Mowing Instructions and AdjustmentsTransporting Specifications Operating InstructionsOperating Check List Lubrication MaintenanceOptions StorageOptions CON’T Mower Chain KIT Assembly InstructionsNot TRY to Clean DIS Trouble ShootingCharge Chute When MowerWarranty Flat Deck Mower Deck & Components Flat Deck Mower Deck & Components CON’T Flat Deck Mower Belt Drive Flat Deck Mower Belt Drive CON’T Comer Gearbox Part no -011C Part no -011C Comer Gearbox CON’TIEG Gearbox IEG Gearbox CON’T Gauge Wheel Assembly Gauge Wheel Assembly CON’T Power TAKE-OFF Part no -012C Part no -077S Options Front ANTI-SCALPING RollerOptions Chain KIT Decal Placement 29/04 Corporate Office P.O. Box 5060 Salina, Kansas 67402-5060 USA

FD2548 specifications

The Land Pride FD2548 is a robust and dependable flail mower designed for professional landscaping, agriculture, and non-commercial use. This mower stands out for its ability to handle a variety of mowing applications with efficiency and precision. Boasting a cutting width of 48 inches, the FD2548 is engineered to tackle tough vegetation and maintain a clean finish across diverse terrains.

One of the main features of the Land Pride FD2548 is its heavy-duty construction. It is built with high-quality materials, ensuring durability and longevity even under rigorous conditions. The mower is equipped with a rugged frame that provides stability and strength during operation. The rotating flail blades are particularly noteworthy; they are designed to efficiently chop through dense grass, weeds, and brush, making it an ideal choice for overgrown areas.

The FD2548 incorporates advanced mower technology to enhance cutting performance. Its flail blade system utilizes multiple blades that rotate around a horizontal shaft, delivering a finely shredded finish that decomposes quickly, enriching the soil. The blades are replaceable, allowing users to easily maintain optimal performance and efficiency. This mower also features adjustable cutting height settings, providing flexibility to achieve the desired grass length while accommodating various landscaping needs.

Another characteristic that sets the Land Pride FD2548 apart is its compatibility with multiple tractor models. It features a category 1 quick hitch system, allowing for easy attachment and detachment without the need for additional tools. This versatility makes it a favorite among farmers, landscapers, and large property owners, enabling users to switch between implements quickly and efficiently.

Additionally, the FD2548 is designed with operator safety in mind. It includes features such as a rear discharge design that prevents clippings from being ejected towards the operator, ensuring a safer working environment. The mower is also relatively easy to service, with accessible grease fittings and a user-friendly design that simplifies routine maintenance.

In summary, the Land Pride FD2548 flail mower excels in durability, versatility, and cutting performance. Its heavy-duty construction, advanced flail technology, adjustable height settings, and safety features make it an excellent choice for anyone looking to maintain their property effectively and efficiently. Whether you're managing a large farm or tending to a residential landscape, the FD2548 is engineered to deliver results with reliability and precision.