Land Pride BH2585 manual Important Safety Information, Look For The Safety Alert Symbol

Page 3

Land Pride

Important Safety Information

Table of Contents

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!extra safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training

of personnel involved in the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

working area.

▲ Turning tractor too tight may

cause implement to ride up on

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

10/28/05

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Backhoes Table of Contents For Your Protection Important Safety InformationLook For The Safety Alert Symbol Be Aware Signal WordsKeep Riders Off Machinery Use Safety Lights and DevicesTransport Machinery Safely Transporting the Loader and AttachmentAvoid High Pressure Fluids Hazard Practice Safe MaintenancePrepare for Emergencies Wear Protective Equipment838-378C 838-379C 838-380C818-339C 839-933C 839-932C Serial Number Plate Using This ManualApplication Owner AssistanceBackhoe Operation, Maintenance & Safety Tips Skid Steer Requirements Power Beyond Hydraulic SystemsAssembly and Set-Up Tractor RequirementsClosed Center Hydraulic Systems Power Beyond & Closed Center KitIndependent PTO Hydraulic Pump System Choose the Appropriate HosingBackhoe Independent Hydraulic Systems Main Frame Boom Cylinder Inside Boom Stabilizer Cylinder For All TractorsFor John Deere Tractors Mounting The BackhoeTransport Lock Lower Link Hitch Bracket InstallationBackhoe Stabilizer Kit Installation Seat Assembly Bucket InstallationSkid Steer Hook-Up Optional Equipment Assemblies Locking BarRipper Tooth Operating Instructions Preparing For OperationOperating The Backhoe Transporting The BackhoeControl Functions BoomDipper Stick And Bucket Dipper Stick & Boom Angle Digging SuggestionsDigging at the Correct Angle Observe the following cautions while diggingBucket Angle Storage MaintenanceBucket Tooth Replacement Maintenance and LubricationBucket Cylinder Base End LubricationBucket Pivot Bucket Pivot End of StickBoom Pivot Unerneath at end of Boom Dipper Stick Cylinder Base EndBoom Cylinder Rod End Boom Pivots Both SidesBoom Swing Pivot Boom Cylinder Base EndStabilizer Cylinder Rod End Both Sides Stabilizer Arms Both SidesBoom Swing Cylinder Base End Boom Swing Cylinder Rod End Both SidesSpecifications and Capacities BH25 Series BackhoesBH2585 Features Benefits Features and BenefitsTroubleshooting Performance Problem Cause SolutionLoad drops when valve Hydraulic System· m Ft-lb Mm x pitch Torque Values Chart For Common Bolt SizeAppendix In-tpiWarranty Corporate Office P.O. Box Salina, Kansas 67402-5060 USA
Top Page Image Contents