Land Pride BH3512 manual Important Safety Information, Be Aware Signal Words, For Your Protection

Page 3

Land Pride

Important Safety Information

Table of Contents

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

7/14/08

BH3512 Backhoes 340-131M

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Backhoes Table of Contents Shutdown and Storage Important Safety InformationBe Aware Signal Words For Your ProtectionTransporting the Loader and Attachment Use Safety Lights and DevicesPractice Safe Maintenance Transport Machinery SafelyAvoid High Pressure Fluids Hazard Prepare for EmergenciesWear Protective Equipment Keep Riders Off Machinery838-378C 838-380C818-339C 839-933C 839-932C Introduction Using This ManualApplication Owner AssistanceBackhoe Operation, Maintenance & Safety Tips Open Center System Assembly and Set-UpTractor Requirements Hydraulic System RequirementsChoose the Appropriate Hosing Table of ContentsHydraulic valve can be damaged by Testing Procedure for Hydraulic Circuits Testing Open Center SystemChecking a Single Circuit Return Hose Testing Closed Center SystemHydraulic Testing Chart Checking the CylindersMounting The Backhoe Using Tractor Hydraulics All TractorsUsing Tractor Hydraulics John Deere Dipper Stick CylinderTransport Lock Bolts Top Link Tractor Lower Links Tractor Lower Link Bucket InstallationLocking Bar Installation Optional Seat AssemblyOperating Instructions Preparing For OperationOperating The Backhoe Transporting The BackhoeDipper Stick And Bucket Control FunctionsStabilizers BoomDigging Suggestions Digging at the Correct AngleDipper Stick & Boom Bucket Storage MaintenanceBucket Tooth Replacement Maintenance and LubricationBucket Cylinder Base End LubricationLubrication Bucket PivotBoom Cylinder Rod End Boom PivotBoom Cylinder Base End Stabilizer Arms Boom Swing Cylinder Rod EndBoom Swing Cylinder Base End Specifications & Capacities BH35 Series BackhoesBH3512 Features Benefits Features and BenefitsTroubleshooting Performance Problem Cause SolutionLoad drops when valve Hydraulic System· m Ft-lb Mm x pitch Torque Values ChartAppendix In-tpi30 BH3512 Backhoes 340-131M Warranty Corporate Office PO. Box 5060 Salina, Kansas 67402-5060 USA
Top Page Image Contents