Land Pride RCR2596, 312-753M, RCR2510 Wear Protective Equipment, Avoid High Pressure Fluids Hazard

Page 5

Land Pride

Table of Contents

Important Safety Information

These are common practices that may or may not be applicable to the products described in this manual.

Prepare for Emergencies

▲Be prepared if a fire starts.

▲Keep a first aid kit and fire extinguisher handy.

▲Keep emergency numbers for doctor, ambulance, hospital and fire department near phone.

911

Wear

Protective Equipment

▲Protective clothing and equipment should be worn.

▲Wear clothing and equipment appropriate for the job. Avoid loose fitting clothing.

▲Prolonged exposure to loud noise can cause hearing impairment or hearing loss. Wear suitable hearing protection such as earmuffs or earplugs.

▲Operating equipment safely requires the full attention of the operator. Avoid wearing radio headphones while operating machinery.

Avoid High

Pressure Fluids Hazard

▲Escaping fluid under pressure can penetrate the skin causing serious injury.

▲Avoid the hazard by relieving pressure before disconnecting hydraulic lines or performing work on the system.

▲Make sure all hydraulic fluid connections are tight and all hydraulic hoses and lines are in good condition before applying pressure to the system.

▲Use a piece of paper or cardboard, NOT BODY PARTS, to check for suspected leaks.

▲Wear protective gloves and safety glasses or goggles when working with hydraulic systems.

▲If an accident occurs, see a doctor immediately. Any fluid injected into the skin must be treated within a few hours or gangrene may result.

Keep Riders

Off Machinery

▲Riders obstruct the operator’s view, they could be struck by foreign objects or thrown from the machine.

▲Never allow children to operate equipment.

5/09/08

RCR2596, RCR2510 and RCRM2510 Rotary Cutters 312-753M

3

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Rotary Cutters Table of Contents Safety at All Times Practice Safe Mainte- nance Use a Safety ChainTransport Machinery Safely Keep Riders Off Machinery Wear Protective EquipmentAvoid High Pressure Fluids Hazard 818-335C 838-062C818-130C Shown 818-240C818-543C 818-830C818-552C 818-142C 818-564C818-556C 838-094C 818-540C Introduction ApplicationOwner Assistance Land Pride Further AssistanceAssembly and Set-Up Pre-Assembly ChecklistTractor Requirements Dealer PreparationsDriveline Installation Hitch AssemblyGearbox Vent Plug Lift-Type CutterPull-Type Cutter RCR2596 Hitch AssemblyRCR2510 Hitch Assembly RCR2596, RCR2510 & RCRM2510 Equal Angle Driveline Assembly Equal Angle Driveline InstallationRCR2510 & RCRM2510 Constant Velocity Driveline Assembly Constant Velocity Driveline InstallationFront Chain Shields RCR2596 Chain Safety Shields OptionalFront Chain Shields RCRM2510 Rear Chain ShieldFront Rubber Shields RCR2596 Rubber Safety Shields OptionalFront Rubber Shields RCRM2510 Rear Rubber ShieldPoint Lift Type Cutter Tractor Hook-Up Point Tractor Hook-UpDriveline Hook-up Driveline Shortening Checking Driveline Minimum LengthMaximum PTO Driveline Movement During Operation Table of Contents Pull-Type Tractor Hook-Up Safety ChainsPull-Type Tractor Un-Hook Pull-Type Tractor Hook-UpCheck Chains, 3-Point Lift-Type Cutters Check Chain AssemblyAdjustments Leveling ProcedureLift-Type Cutter Pull-Type CutterPoint Cutter Height Adjustment Cutting Height AdjustmentCutting Height Pull-Type Lift SelectionsOperating Procedures Operating ChecklistOperating Check List Transporting the CutterTurning Angles for Pull-Type Cutters Cutting InstructionsConventional U-Joint Driveline CV DrivelineDitch / Bank Crossing Steep Ditches & BanksGeneral Operating Instructions RightTable of Contents Service Cutting Blades MaintenanceMaintenance & Lubrication Blade Positioning and Rotational DirectionalLand Pride Cutter Blade Parts Driveline ProtectionLand Pride List of Cutter Blades Optional Low Lift Cutter BladesClutch Inspection Clutch DisassemblyClutch Assembly Skid Shoe Maintenance Tractor MaintenanceFlex Couplers Storage InstructionsHours Lubrication PointsTailwheel Spindle Tube Tailwheel HubDriveline Driveline U-JointsConstant Velocity Driveline Flex CouplerRatchet Jack RequiredPillow Bearing Pull-Type Cutter RCR2596, RCR2510 & RCRM2510 Models Specifications & CapacitiesFeatures & Benefits Troubleshooting Appendix Torque Values Chart for Common Bolt SizesTire Inflation Chart Overall Unit and Drivelines One year Parts and Labor WarrantyCorporate Office P.O. Box Salina, Kansas 67402-5060 USA
Related manuals
Manual 82 pages 36.19 Kb

312-753M, RCR2510, RCRM2510, RCR2596 specifications

Land Pride, a leading manufacturer of agricultural and landscaping equipment, has established a strong reputation for producing innovative and durable products. Among their diverse range of offerings are the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 models, each engineered with specific features to cater to various land management and maintenance tasks.

The Land Pride 312-753M is an advanced grooming mower designed for meticulous finishing work in landscape applications. With a cutting width of 75 inches, it is suitable for a range of tasks from mowing parks to maintaining golf course fairways. Its floating deck design allows for optimal contour following, ensuring a clean cut even on uneven terrain. The mower features a robust construction with reinforced edges that enhance durability, and the blade tip speed maximizes cutting efficiency.

Next in the lineup, the RCR2596 rotary cutter is engineered for heavy-duty mowing, making it ideal for clearing tall grass and brush in fields and pastures. With a 96-inch cut width, the RCR2596 boasts a rugged design that can handle various terrains and dense vegetation. Its heavy-duty gearboxes and cutting blades are built to last, providing operators with peace of mind during extensive operations. The RCR2596 also includes a side skirt that improves safety by containing debris while mowing.

The RCRM2510 is a robust rotary cutter that combines performance with efficiency. Designed for smaller tractors, it features a 10-foot cutting width, making it an excellent choice for tasks demanding precision and power. The RCRM2510 incorporates a fully adjustable hitch that allows for easy attachment to various tractor models. Additionally, its floating design permits it to follow the contours of the land, optimizing its cutting capabilities across diverse landscapes.

Lastly, the RCR2510 model is another addition to the rotary cutter series, renowned for its versatile applications. With a cutting width of 10 feet, it is perfect for managing overgrown fields, pastures, and large landscaped areas. The RCR2510 features heavy-duty construction intended to withstand challenging conditions, ensuring longevity and reliability. Its user-friendly design facilitates easy maintenance, and the premium blades deliver exceptional cutting performance.

In summary, the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 rotary cutters offer exceptional capabilities tailored to meet the needs of both professional landscapers and agricultural operators. Their advanced features, reliable construction, and innovative technologies set a high standard in the industry, making them essential tools for effective land management.
Top Page Image Contents