Marantz SR7300OSE manual CH Input, AUX2 Input

Page 38

ENGLISH

7.1 CH INPUT.

The SR7300 is equipped for future expansion through the use of Multi channel SACD multi channel player or DVD-Audio player.

This is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), SR (surround right), SBL (surround back left) and SBR (surround back right) channels of the 7.1 CH. In jacks are output directly to the front (left and right), center, surround (left and right) and surround back (left and right) speaker systems as well as the pre-out jacks without passing through the surround circuitry.

In addition, the signal input to the SW (subwoofer) jack is output to the PRE OUT SW (subwoofer) jack.

When 7.1 CH. INPUT is selected, the last video input used remains routed to the Monitor Outputs.

This permits simultaneous viewing with video sources.

2.

AV SURROUND RECEIVER SR7300

SURROUND

2.

1. Select a desired Video source to decide the routed video signal to the Monitor Outputs .

2. Press the 7.1 CH INPUT button on the front panel or press 7.1/6.1 IN on the remote to switch the 7.1 channel input.

3. If necessary to adjust the output level of each channel, use “7.1 Ch. INPUT LEVEL” in OSD menu system as desired.

Adjust the speaker output levels so that you can hear the same sound level from each speaker at the listening position. For the front left, front right, center, surround left, surround right, surround back left and surround back right speakers, the output levels can be adjusted between –10 to +10 dB.

The subwoofer can be adjusted between –15 and +10 dB. These adjusting result will be stored to 7.1 Ch. INPUT condition. (see to page 26)

4. Adjust the main volume with the MAIN VOLUME knob or the VOL buttons on the remote.

To cancel the 7.1 Ch. INPUT setting, press the 7.1 CH-INbutton on the front panel or press 7.1/6.1 IN on the remote.

Notes:

•When the 7.1 Ch. Input is in use, you may not select a surround mode, as the external decoder determines processing.

•In addition, there is no signal at the record outputs when the 7.1 Ch. Input is in use.

AUX2 INPUT

If you don’t need to connect 7.1 Ch. input terminals with multi channel decoder,

L(front left) and R (front right) inputs terminals are available as AUX2 input.

In this case, You can connect additional audio source to AUX2 as other audio input terminals.

AV SURROUND RECEIVER SR7300

SURROUND

34

Image 38

Contents Model SR7300 / SR7300OSE User Guide Risk of Electric Shock Read Before Operating Equipment AC Polarized PlugPage Table of Contents Description PrecautionsIntroduction English Features AccessoriesFront Panel 4INPUT Function Selector buttons AUDIO/ Video @0PHONES jack for stereo headphones3AUX1 input jacks 5SPEAKERS A/B buttonFL Display SBR, C Rear PanelVCR2 AC Outlets ⁄6AUDIO IN/OUT CD, TAPE, CD-R, TV DVD, VCR1, DSS/VCR2Names and Functions ¤4P.SCAN preset scan button ⁄7SETUP button¤3VOLUME / buttons ‹2SLEEP sleep timer buttonRemote Control Range Loading BatteriesGeneral Information of RC7300SR AMP ModeTuner Mode To SR7300Height of the Speaker Units Speaker PlacementConnections Connecting Banana Plug Connecting SpeakersConnecting Speaker Wire Connecting a SubwooferCD Recorder / MD Deck CD Player Tape Deck Connecting Audio ComponentsConnecting Digital Audio Components Video jack Connecting Video ComponentsVIDEO, S-VIDEO , Component Jacks Component jackPower Amplifer Advanced ConnectingConnecting Remote Control Jacks CD RecorderConnecting AN FM Outdoor Antenna Connecting the Antenna TerminalsConnecting the Supplied Antennas Connecting AN AM Outdoor AntennaConnecting for the Multi Room MultiroomUnlocked SetupOn Screen Display Menu System Speaker Setup Speaker SizeSpeaker Distance Speakers LevelSurround Select Surround in Setup Main Menu with orPreference Channel LevelCS II Circle Surround II Parameter Select PRO Logic II in Setup Main Menu with orPL II PRO Logic II Music Parameter Multi RoomYou can select Main ROOM, Multi Room or Disable Pressing DC Trigger SetupSelect DC-TRIG Setup in Setup Main Menu with or CH Input LevelAdjusting the Tone Bass & Treble Control Selecting the Surround ModeAdjusting the Main Volume English Basic Operation Play BackTemporarily Turning OFF the Sound Using the Sleep TimerNight Mode Mode Surround ModeAuto EX/ESStereo Circle Surround II CSII-CINEMA, CSII-MUSIC, CSII-MONOVirtual Source DirectDigital , 2 Surround DTS-ES AutoDigital PCMOther Function Input selector button Recording AN Analog SourceSpeaker A/B OUT , CD-R/MD OUT, VCR1 OUT, and DSS/VCR2 OUT outputsCH Input AUX2 InputListening to the Tuner Preset MemoryBasic Operation Tuner Clearing Stored Preset Stations Manual Preset MemoryRecalling a Preset Station Preset Scan Select the desired preset station by pressing the Tuning or→ B → C ... Z → 1 → 2 → 3 .... → → + → / → Blank → a UP → Sorting Preset StationsName Input of the Preset Station ← DownSecond Room Multi Room Playback Using Multi Room OUT TerminalsMulti Room System GeneralRemote Controller Operation Controlling Marantz ComponentsDeck a B Controlling a Marantz MD Deck MD ModeControlling a Marantz Tape Deck Tape Mode Erasing Learning Code Learn ModeLearning Procedure Erasing the code by buttonsErasing the all functions Macro ModeProgramming Macros Confirming Macros Using MacrosEditing Macros Example AMP*→ 2 Power on → 3 DVD → 4 AMP*→ 5 8 Virtual → 6 DVD* → 7Examples of Macro Programs PlayAdjusting the Interval Time of Macro Operations Transmitting Clearing Macro ProgramsTroubleshooting Are the power amplifiers and speaker working properly ?General Malfunction HOW to Reset the Unit Memory backupTechnical Specifications DimensionIs a registered trademark