Klark Teknik DY11 7HJ manual Phantom power, Class B device

Page 10

PRECAUTIONS

Phantom power

Never apply phantom power to any unbalanced input source. Before powering the unit, always check the +48V status of any phantom powered equipment connected to any of the 16 output XLRs on the rear panel. If +48V is detected on any of these outputs the unit will apply +48V to any devices connected to their corresponding inputs (front or rear panel) as soon as the unit is powered up.

Radio frequency interference

Class B device

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio TV technician for help.

Electric fields

Caution:

In accordance with Part 15 of the FCC Rules & Regulations, “… changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.”

Should this product be used in an electromagnetic field that is amplitude modulated by an audio frequency signal (20Hz to 20kHz), the signal to noise ratio may be degraded. Degradation of up to 60dB at a frequency corresponding to the modulation signal may be experienced under extreme conditions (3V/m, 90% modulation).

Operation

Never remove, for example, covers, housings or any other safety guards.

Never operate the equipment with the covers removed or if safety guards are ineffective or their effectiveness has been reduced.

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Splitter Operator manual Page Operator Manual Page Important Safety Instructions Page Klark Teknik Page Precautions Phantom power Class B deviceContents Technical specification Crib sheet More about splitters Balanced audio Service informationIntroduction About the Square ONE SplitterTypical channel I/O connection options Features Square ONE Splitter has eight channels, each withUsing the main inputs How to use the Square ONE SplitterUsing the outputs Using the parallel inputs Unpacking InstallationGetting started Checking the mains fuseConnecting the audio cables Connecting the power cableChannel I/O pin-outs Powering the unit O connections to unbalanced devicesTX OUT 1 to TX OUT 8 sockets Eight Front panelFixed Gain Isolated Output C / Parallel Input section 1 to in 8 sockets Eight electronicallyActive Splitter section Yellow LED for Solo switchYellow LED for 30Hz switch Output level meter dBu Dedicated peakPhones, power and media split section Level control knob dB AdjustmentRear panel Channel I/O connectionsMedia Split switch Recessed switch for Media split and ground lift switchesYellow LED for Media Split switch. This Supply voltage and fuse specificationsBasic operation Using headphonesOperation Solo bus operationMedia split mode Using the ground lift switchesApplications Example 1 FOH and MON split, and broadcast outExample 2 FOH and MON split, and recorder Example 3 Pre-mixed broadcast output Audio signal path Signal path for channels 1Technical specification Inputs Mic/lineDimensions Crib sheet Location Date ApplicationMore about splitters Passive parallel splitter Stage box passiveIsolated splitter IsolatedActive splitter Balanced audio Cleaning the unit Service informationRoutine maintenance Checking/replacing the mains fuseService information Service information Page Midas Klark Teknik Limited

DY11 7HJ specifications

Klark Teknik has long been synonymous with excellence in audio processing and dynamic control, and the DY11 7HJ is no exception. This versatile digital processor caters to audio engineers, musicians, and production professionals, delivering superior sound quality and innovative features that enhance any audio setup.

One of the standout characteristics of the DY11 7HJ is its compact design, making it ideal for various applications, from live performances to studio recording. Despite its small footprint, it boasts a powerful digital signal processing (DSP) engine that supports advanced algorithms for dynamic range management and sound shaping. This ensures that users can achieve the desired sound profile effortlessly and efficiently.

The DY11 7HJ features an intuitive user interface that allows for swift adjustments and deep customization. With its smooth navigation and clear display, engineers can quickly adapt settings in real-time during performances or recordings. Users have access to an array of presets specifically designed for various instruments, vocal types, and genres, making it easy to find the perfect sound without needing detailed technical knowledge.

Connectivity is another strong point of the DY11 7HJ, offering multiple input and output options. It supports both analog and digital connections, facilitating integration with other audio equipment. This versatility enhances workflow in both live and studio environments, allowing seamless interaction with mixers, effects processors, and recording devices.

In terms of sound processing, the DY11 7HJ utilizes cutting-edge compression and gating technologies. These features enable precise control over dynamics, ensuring that audio signals are balanced and clear, whether addressing vocal tracks or handling dynamic instrumental performances. Moreover, the integrated equalization capabilities allow for real-time adjustments to shape the audio tone, making it easier to fit each sound into the larger mix.

Durability and reliability are also key characteristics of the DY11 7HJ. Constructed with high-quality materials, it is designed to withstand the rigors of live performance and studio use, ensuring longevity and consistent performance.

In conclusion, the Klark Teknik DY11 7HJ stands out as a remarkable digital audio processor, equipped with powerful features, advanced technologies, and robust connectivity options. Whether you are a seasoned audio professional or a budding enthusiast, the DY11 7HJ is engineered to enhance your sound experience, making it a valuable tool in any audio arsenal. With its impressive performance and user-friendly interface, this processor is set to meet the demands of modern audio production and live sound environments.
Top Page Image Contents