Klark Teknik DY11 7HJ manual Powering the unit, O connections to unbalanced devices

Page 20

Getting started

Connecting to unbalanced equipment

Important:

We recommend that you only connect balanced devices to your Square ONE Splitter. However, if you do have to connect unbalanced devices, we recommend that you use the Klark Teknik DN100 DI box to balance the signal first.

Ideally, you will be making the best use of the low-noise high-headroom balanced inputs of the Square ONE Splitter by connecting to similarly balanced equipment. However, if you do have to connect to unbalanced devices, the following wiring is recommended for best results.

Male XLR chassis connector

1

Ground

+ve

2-ve

3

Ground

Unbalanced device

Pin 1: Screen/Ground (not connected at balanced end if ground loops are generated)

Pin 2: Hot signal

Pin 3: Ground at unbalanced end

Pin 1: Screen/Ground (not connected at balanced end if ground loops are

2

1

-ve

Female XLR

3

 

 

chassis

 

 

connector

 

 

 

 

 

 

+ve

 

 

 

 

Figure 3: I/O connections to unbalanced devices

generated)

Pin 3: Ground at unbalanced end

Pin 2: Hot signal

Powering the unit

Switch the power on at the mains power outlet. (The Square ONE Splitter does not have a mains power on/off switch.)

Your unit is now ready to operate.

8

Square ONE Splitter

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Splitter Operator manual Page Operator Manual Page Important Safety Instructions Page Klark Teknik Page Precautions Phantom power Class B deviceContents Technical specification Crib sheet More about splitters Balanced audio Service informationIntroduction About the Square ONE SplitterTypical channel I/O connection options Features Square ONE Splitter has eight channels, each withUsing the outputs How to use the Square ONE SplitterUsing the main inputs Using the parallel inputs Installation Getting startedUnpacking Checking the mains fuseChannel I/O pin-outs Connecting the power cableConnecting the audio cables Powering the unit O connections to unbalanced devicesFront panel Fixed Gain Isolated Output C / Parallel Input sectionTX OUT 1 to TX OUT 8 sockets Eight 1 to in 8 sockets Eight electronicallyYellow LED for Solo switch Yellow LED for 30Hz switchActive Splitter section Output level meter dBu Dedicated peakPhones, power and media split section Level control knob dB AdjustmentRear panel Channel I/O connectionsMedia split and ground lift switches Yellow LED for Media Split switch. ThisMedia Split switch Recessed switch for Supply voltage and fuse specificationsUsing headphones OperationBasic operation Solo bus operationMedia split mode Using the ground lift switchesApplications Example 1 FOH and MON split, and broadcast outExample 2 FOH and MON split, and recorder Example 3 Pre-mixed broadcast output Audio signal path Signal path for channels 1Technical specification Inputs Mic/lineDimensions Crib sheet Location Date ApplicationMore about splitters Passive parallel splitter Stage box passiveIsolated splitter IsolatedActive splitter Balanced audio Service information Routine maintenanceCleaning the unit Checking/replacing the mains fuseService information Service information Page Midas Klark Teknik Limited

DY11 7HJ specifications

Klark Teknik has long been synonymous with excellence in audio processing and dynamic control, and the DY11 7HJ is no exception. This versatile digital processor caters to audio engineers, musicians, and production professionals, delivering superior sound quality and innovative features that enhance any audio setup.

One of the standout characteristics of the DY11 7HJ is its compact design, making it ideal for various applications, from live performances to studio recording. Despite its small footprint, it boasts a powerful digital signal processing (DSP) engine that supports advanced algorithms for dynamic range management and sound shaping. This ensures that users can achieve the desired sound profile effortlessly and efficiently.

The DY11 7HJ features an intuitive user interface that allows for swift adjustments and deep customization. With its smooth navigation and clear display, engineers can quickly adapt settings in real-time during performances or recordings. Users have access to an array of presets specifically designed for various instruments, vocal types, and genres, making it easy to find the perfect sound without needing detailed technical knowledge.

Connectivity is another strong point of the DY11 7HJ, offering multiple input and output options. It supports both analog and digital connections, facilitating integration with other audio equipment. This versatility enhances workflow in both live and studio environments, allowing seamless interaction with mixers, effects processors, and recording devices.

In terms of sound processing, the DY11 7HJ utilizes cutting-edge compression and gating technologies. These features enable precise control over dynamics, ensuring that audio signals are balanced and clear, whether addressing vocal tracks or handling dynamic instrumental performances. Moreover, the integrated equalization capabilities allow for real-time adjustments to shape the audio tone, making it easier to fit each sound into the larger mix.

Durability and reliability are also key characteristics of the DY11 7HJ. Constructed with high-quality materials, it is designed to withstand the rigors of live performance and studio use, ensuring longevity and consistent performance.

In conclusion, the Klark Teknik DY11 7HJ stands out as a remarkable digital audio processor, equipped with powerful features, advanced technologies, and robust connectivity options. Whether you are a seasoned audio professional or a budding enthusiast, the DY11 7HJ is engineered to enhance your sound experience, making it a valuable tool in any audio arsenal. With its impressive performance and user-friendly interface, this processor is set to meet the demands of modern audio production and live sound environments.
Top Page Image Contents