Klark Teknik DY11 7HJ manual Active Splitter section, Output level meter dBu Dedicated peak

Page 22

Front panel

ACTIVE SPLITTER section

All of the switches in this section are of the two-position latching pushbutton type. Each switch, unless otherwise stated, has an adjacent LED for on/off indication, where illuminated LED = switch is on, and extinguished LED = switch is off.

1 OUTPUT level meter (dBu): Dedicated peak

reading, four-segment audio level LED meter that follows the output level at all times, no matter how the controls are set. The segments are: -15dBu (green); 0dBu (green); +12dBu (yellow); and +21dBu (red). Illumination of the red LED indicates the signal is being clipped.

2 Yellow LED for SOLO switch.

3 SOLO switch: Switches solo on/off. With solo on,

post mic amp gain audio is sent to the PHONES output, allowing you to listen to and monitor the audio content locally.

4 GAIN control knob: Nine-way control knob adjusts

the amount of mic gain added to the input signal before it is sent to the electronically balanced outputs. Range is from 0dB to +40dB in 5dB steps.

Note: The transformer isolated outputs are derived before the mic amp gain stage and are buffered and driven at -6dB operating gain, with no user adjustment available.

5 Yellow LED for 30Hz switch.

6 30Hz switch: Switches the 30Hz high pass filter

on/off. Operating at 30Hz, the filter acts as an ‘anti- rumble’ filter, which aids the removal of unwanted high energy low frequency elements in the audio signal.

1

9

8

2

3

4

5

6

7

7

8

Channel number and write-on panel.

+48V switch: Switches the +48V phantom power supply on/off.

Additionally, there is the facility of phantom power sensing provided on all electronic outputs that remotely enables +48V on the splitter mic input XLRs when phantom power is activated from any attached console. This is indicated by the illumination of its associated LED.

9 Red LED for +48V switch. This LED is for +48V switch on/off indication, but also illuminates when

phantom power is detected on either or both of the output XLRs (rear panel), even when the +48V switch is off.

10

Square ONE Splitter

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Splitter Operator manual Page Operator Manual Page Important Safety Instructions Page Klark Teknik Page Precautions Phantom power Class B deviceContents Technical specification Crib sheet More about splitters Balanced audio Service informationIntroduction About the Square ONE SplitterTypical channel I/O connection options Features Square ONE Splitter has eight channels, each withUsing the main inputs How to use the Square ONE SplitterUsing the outputs Using the parallel inputs Unpacking InstallationGetting started Checking the mains fuseConnecting the audio cables Connecting the power cableChannel I/O pin-outs Powering the unit O connections to unbalanced devicesTX OUT 1 to TX OUT 8 sockets Eight Front panelFixed Gain Isolated Output C / Parallel Input section 1 to in 8 sockets Eight electronicallyActive Splitter section Yellow LED for Solo switchYellow LED for 30Hz switch Output level meter dBu Dedicated peakPhones, power and media split section Level control knob dB AdjustmentRear panel Channel I/O connectionsMedia Split switch Recessed switch for Media split and ground lift switchesYellow LED for Media Split switch. This Supply voltage and fuse specificationsBasic operation Using headphonesOperation Solo bus operationMedia split mode Using the ground lift switchesApplications Example 1 FOH and MON split, and broadcast outExample 2 FOH and MON split, and recorder Example 3 Pre-mixed broadcast output Audio signal path Signal path for channels 1Technical specification Inputs Mic/lineDimensions Crib sheet Location Date ApplicationMore about splitters Passive parallel splitter Stage box passiveIsolated splitter IsolatedActive splitter Balanced audio Cleaning the unit Service informationRoutine maintenance Checking/replacing the mains fuseService information Service information Page Midas Klark Teknik Limited

DY11 7HJ specifications

Klark Teknik has long been synonymous with excellence in audio processing and dynamic control, and the DY11 7HJ is no exception. This versatile digital processor caters to audio engineers, musicians, and production professionals, delivering superior sound quality and innovative features that enhance any audio setup.

One of the standout characteristics of the DY11 7HJ is its compact design, making it ideal for various applications, from live performances to studio recording. Despite its small footprint, it boasts a powerful digital signal processing (DSP) engine that supports advanced algorithms for dynamic range management and sound shaping. This ensures that users can achieve the desired sound profile effortlessly and efficiently.

The DY11 7HJ features an intuitive user interface that allows for swift adjustments and deep customization. With its smooth navigation and clear display, engineers can quickly adapt settings in real-time during performances or recordings. Users have access to an array of presets specifically designed for various instruments, vocal types, and genres, making it easy to find the perfect sound without needing detailed technical knowledge.

Connectivity is another strong point of the DY11 7HJ, offering multiple input and output options. It supports both analog and digital connections, facilitating integration with other audio equipment. This versatility enhances workflow in both live and studio environments, allowing seamless interaction with mixers, effects processors, and recording devices.

In terms of sound processing, the DY11 7HJ utilizes cutting-edge compression and gating technologies. These features enable precise control over dynamics, ensuring that audio signals are balanced and clear, whether addressing vocal tracks or handling dynamic instrumental performances. Moreover, the integrated equalization capabilities allow for real-time adjustments to shape the audio tone, making it easier to fit each sound into the larger mix.

Durability and reliability are also key characteristics of the DY11 7HJ. Constructed with high-quality materials, it is designed to withstand the rigors of live performance and studio use, ensuring longevity and consistent performance.

In conclusion, the Klark Teknik DY11 7HJ stands out as a remarkable digital audio processor, equipped with powerful features, advanced technologies, and robust connectivity options. Whether you are a seasoned audio professional or a budding enthusiast, the DY11 7HJ is engineered to enhance your sound experience, making it a valuable tool in any audio arsenal. With its impressive performance and user-friendly interface, this processor is set to meet the demands of modern audio production and live sound environments.
Top Page Image Contents