FL DISPLAY
s | d |
| g | j k ¡0 ¡2 |
|
|
| ||
a |
| f | h |
| l ¡1 | ¡3 | |||
DISP | AUTO | TUNED | ST V – OFF | NIGHT | PEAK ATT ANALOG | SURROUND | |||
¡6 SLEEP | AUTO SURR | DIRECT | DISC 6.1 MTX 6.1 | EQ | DIGITAL | DIGITAL |
| ||
| L | C | R | ||||||
|
|
|
|
|
| PCM |
| LFE |
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| SL | S | SR |
| ¡5 | ¡4 |
a DISP (Display Off) indicator | j | NIGHT mode indicator |
¡4ENCODED CHANNEL STATUS indicators
These indicators display the channels that are encoded with a digital input signal. If the selected digital input signal is Dolby Digital 5.1ch or DTS 5.1ch, “L”, “C”, “R”, “SL”, “SR” and “LFE” will be illuminated. If the digital input signal is 2 channel
If Dolby Digital 5.1ch signal with Surround EX flag or
¡5Main Information Display
This display shows messages relating to the status, input source, surround mode, tuner, volume level or other aspects of unit’s operation.
ENGLISH
This indicator is illuminated when the SR5400 is in the display off condition.
sSLEEP timer indicator
This indicator is illuminated when the sleep timer function is in use.
dAUTO SURR (Auto Surround mode)
indicator
This indicator illuminates to show that the AUTO SURROUND mode is in use.
fTUNER’s indicators
AUTO : This indicator illuminates when the tuner’s Auto mode is in use.
TUNED : This indicator illuminates when a station is being received with sufficient signal strength to provide acceptable listening quality.
ST(Stereo) : This indicator illuminates when an FM station is being tuned into stereo.
g
MTX6.1)
These indicators will illuminate to show the DTS- ES decoding mode (Discrete 6.1 or Matrix 6.1).
hV (video)-OFF mode indicator
This indicator is illuminated when the
This indicator is illuminated when the SR5400 is in the Night mode, which reduces the dynamic range of digital program material at low volume levels.
kPEAK indicator
This indicator is a monitor for an analog audio input signal. If the selected analog audio input signal is greater than the capable level of internal processing, this will illuminate. If this happens, you should press the ATT button.
lEQ mode indicator
This indicator is illuminated when the
¡0ATT (Attenuation) indicator
This indicator is illuminated when the attenuation function is active.
¡1DIGITAL Input Indicator
This indicator is illuminated when a digital input has been selected.
¡2ANALOG input indicator
This indicator is illuminated when an analog input source has been selected.
¡3SIGNAL FORMAT indicators
2DIGITAL, EX, 2 SURROUND, dts, ES, 96/24,
PCM
When the selected input is a digital source, some of these indicators will be illuminated to display the specific type of signal in use.
¡6DIRECT (Source direct) indicator
This indicator is illuminated when the SR5400 is in the SOURCE DIRECT mode.
5