Front Panel

ENGLISH	FRONT PANEL						@1
ENGLISH							@1
		!5	!6		!7!8 !9
	q w	e r t y		u	i o		!0	!1!2
		AV SURROUND RECEIVER SR5400
		SELECTOR						VOLUME
		CLEAR	MEMORY	TUNING	F/P	MODE	DOWN	UP
		CLEAR	MEMORY	TUNING	F/P	MODE
		VIDEO OFF	6.1CH INPUT	A/D	S-DIRECT	DISPLAY
	SELECT	ENTER					MUTE	ATT
	STANDBY	TVDVD	VCR1	DSS/VCR2 AUX	CD-RTAPE	CD	TUNER
								AUX INPUT
	POWER ON/STANDBY	PHONES					S-VIDEO	VIDEOL AUDIO R

!4 !3

!1VOLUME control knob

Adjusts the overall sound level. Turning the control clockwise increases the sound level.

!2ATT (Attenuate) button

If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens, you should press the ATT button. “ATT” is displayed when this function is activated.

The signal-input level is reduced by about half. Attenuation will not work with the output signal of “REC OUT” (TAPE, CD-R/MD, VCR1 and VCR2 output). This function is memorized for each input function.

!3AUX input jacks

These auxiliary video/audio input jacks accept the connections of a camcorder, portable DVD, game etc.

!4INPUT FUNCTION SELECTOR buttons (AUDIO/ VIDEO)

These buttons are used to select the input sources. The video function selector, such as TV, DVD, VCR1, DSS and AUX, selects video and audio simultaneously.

!8S- (Source) DIRECT button

When this button is pressed, the tone control circuitry is bypassed as well as Bass Management.

Notes:

•The surround mode is automatically switched to AUTO when the source direct function is turned on.

•Additionally, Speaker Configurations are fixed automatically as follows.

Front SPKR = Large, Center SPKR = Large, Surround SPKR = Large, Sub woofer = On

!9DISPLAY button

When this button is pressed, the FL display mode is changed as Surround Mode → Auto-display Off

→Display Off → Input Function and the display off indicator(DISP) lights up in condition of DISPLAY OFF.

@0HEADPHONE jack for stereo headphones

This jack may be used to listen to the SR5400’s output through a pair of headphones. Be certain that the headphones have a standard 1 / 4" stereo phono plug. Note that the main room speakers will automatically be turned off when the headphone jack is in use.

qPOWER switch and STANDBY indicator When this switch is pressed once, the unit turns ON and the display illuminates. When pressed again, the unit turns OFF and the STANDBY indicator will be illuminated.

wSELECT (MULTI FUNCTION MODE

SELECT) button

Press this button to change the mode of the MULTI FUNCTION control dial. l.e. Surround Sound Fields, Tone Control & Set Up Menu.

eSURROUND MODE Selector & MULTI

FUNCTION control dial

This dial changes surround modes & Tone Controls sequentially, and allows you to enter the OSD menu system.

rENTER (MULTI FUNCTION ENTER) button Press this button to enter the setup, which you have chosen by the MULTI FUNCTION dial.

tCLEAR button

Press this button to cancel the station-memory setting mode or preset scan tuning. (See page 26)

yMEMORY button

Press this button to enter the tuner preset memory numbers or station names. (See page 26)

u TUNING (Down) / (Up) buttons

Press these buttons to change the frequency or the preset number. (See page 26)

iF/P (Frequency / Preset) button

During reception of AM or FM, you can change the function of the UP/DOWN buttons for scanning frequencies or selecting preset stations by pressing these buttons. (See page 26)

oMODE button

Press this button to select the auto stereo mode or mono mode when the FM band is selected.

The “AUTO” indicator lights in the auto stereo mode. (See page 26)

!0MUTE button

Press this button to mute the output to the speakers. Press it again to return to the previous volume level.

Audio function sources such as CD, TAPE, CDR/ MD, and TUNER may be selected in conjunction with a Video source.

This feature (Sound Injection) combines a sound from one source with a picture from another. Choose the video source first, and then choose a different audio source to activate this function. Press the TUNER button to switch between FM and AM.

!5VIDEO OFF button

This is used when switching the video signals from the various monitor outputs to Video-Off mode. (see page 24)

!66.1CH IN button

Press this button to select the output of an external multichannel decoder.

!7A/D (Analog/Digital) SELECTOR button

This is used to select between the analog and digital inputs.

Note:

•This button is not used for an input source, that is not set to a digital input in the system setup menu.