ENGLISH
Graphic displays
Basic procedure
Before starting the following procedure,
prepare a
•With Image Converter (Wide Ver 1.2) included in the supplied
~Insert a
•
•SD card
IMPORTANT:
•Refer also to Image Converter PDF files included in the “Manual” folder of the supplied
•Still images (pictures) should have <jll>, and animations (movies) should have <jla> as their extension code in their file names.
•Before you download or delete the files, observe the following:
–Do not download a file while driving.
–Do not turn off the ignition key of the car while downloading or deleting a file.*
–Do not detach the control panel while
downloading or deleting a file.*
*If you do so, the file download or deletion will not be done correctly.
Ÿ
!
•To download the file(s):
\Downloading the files (see page 22)
•To delete the file(s):
\Deleting the files (see page 23)
•To activate the file(s):
\Activating the downloaded files (see page 25)
Downloading the files
•OPENING: Opening screen
To download/delete an animation (30 frames at maximum) which will be shown after the receiver is turned on.
•ENDING: Ending screen
To download/delete an animation (30 frames at maximum) which will be shown before the receiver is turned off.
•PICTURE: Graphic screen
To download/delete still images (30 still images at maximum) which will be shown while playing a source.
•MOVIE: Graphic screen
To download/delete an animation (90 frames at maximum) which will be shown while playing a source.
22