JVC Complete Guide to AV COMPU LINK and Compulink Remote Setup
Page 30

English

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC’s video components (TV, VCR, and DVD player) through the receiver.

To use this remote control system, you need to connect the video components you want to operate following the diagrams and the procedure below.

7AV COMPU LINK connection

Rear panel

VCR

VHS

AV

COMPU LINK

DVD player

RIGHT

DVD

AV

COMPU LINK

AV

COMPU LINK

TV

AV

COMPU LINK EX

AV

COMPU LINK III

Note:

You can connect to the TV with the AV COMPU LINK EX or AV COMPU LINK III terminal.

A TV with AV COMPU LINK RECEIVER/AMP terminal can not be used.

7Video cable connection

Connect the DVD player and/or the VCR to this receiver using the VIDEO (composite video) terminals, and connect this receiver to the TV’s Video Input 2 terminals (composite video input) using composite video cables.

Notes:

•When connecting only the VCR or DVD player to this receiver, connect it directly to the receiver using cables with the monaural mini-plugs.

•Make sure that the remote control code of the VCR connected to the VCR jacks is set to code “A.”

•Refer also to the manuals supplied with your video components.

7Connecting procedure

1If you have already plugged your VCR, DVD player, TV and this receiver into the AC outlets, unplug their AC power cords first.

2Connect your VCR, DVD player, TV and this receiver as illustrated above, using the cables with monaural mini-plugs (not supplied).

3Connect the audio/video input/output jacks on VCR, DVD player, TV and this receiver (see page 8).

4Plug the AC power cords of the components into the AC outlets.

5When turning on the TV for the first time after the AV COMPU LINK connection, turn the TV volume to the minimum using the TV volume control on the TV.

6Turn on the other connected components first, then turn on this receiver.

•When turning on the VCR, use the remote control supplied with this receiver (press STANDBY/ON VCR).

27

Page 29 Page 31
Image 30
Page 29 Page 31
Contents RX-5032VSL STANDBY/ON Precaución -- Interruptor STANDBY/ONPrecaución Ventilación Adecuada Checking the Supplied Accessories Before InstallationPrecautions Setting the Voltage Selector SwitchTable of Contents Parts Identification Front PanelDisplay Remote Control Rear PanelOutput TAPE/CDR OUT, VCR OUT AM antenna connection Connecting the AM and FM AntennasGetting Started FM antenna connectionHow to connect speaker cords Connecting the Speakers and SubwooferConnection diagram Speaker layout diagram How to connect the subwooferAnalog Connections Audio component connections Connecting Audio/Video ComponentsGetting Started If your audio components have a Compu Link jackDVD Video component connectionsVCR To use software encoded with Dolby Digital or DTSPlug the power cord into an AC outlet Connecting the Power CordPutting Batteries in the Remote Control Replace the coverTurning On the Power Basic OperationsSelecting the Source to Play Selecting Different Sources for Picture Sound Adjusting the VolumeBasic Operations Press Speakers ON/OFF on the front PanelTurning Off the Sound Temporarily-Muting Turning Off the Power With the Sleep TimerBasic adjustment auto memory For recording Changing the Display BrightnessBasic Settings Basic Settings Using Multi JOG DialLow Frequency Effect attenuator-LFE Attenuate Selecting the Digital Input TerminalsCrossover frequency-CROSSOVER Dynamic range compression-DCOMPRESSIONSelect digital input mode Basic SettingsSelecting the Analog or Digital Input Mode Press Input DigitalSound Adjustments To turn on the subwoofer, press the button againPress Adjust Sound AdjustmentsSound Adjustments Using Multi JOG Dial Turn Multi JOG dial to select an Appropriate valueSound Adjustments Using Remote Control Adjusting Speaker Output Levels Using Test TonePress Sound Press Test Select a speaker you want to adjustAdjusting Subwoofer Output Level Press SOUND, then press Test to stop the test toneUsing Preset Tuning Setting the AM TunerTuning in to Stations Manually Tuner OperationsTo erase a stored preset station, store a new station on a Selecting the FM Reception ModeTuning in to a Preset Station On the front panel Tuner OperationsDSP modes Creating Realistic Sound FieldsSurround modes Typical multi-channel 5.1 channel reproductionAll Channel Stereo reproduction Creating Realistic Sound FieldsCreating sound field HallPress Surround Using Surround ModesSelect the source you want to listen to and start playing Dolby DigitalAdjustable items and selected Surround/DSP mode Using DSP ModesSignal and speaker indicators on the display To adjust the speaker output level and the effect level forAutomatic Source Selection Compu Link Remote Control SystemPress the play 3 button on the CD player Synchronized RecordingAV Compu Link connection AV Compu Link Remote Control SystemConnecting procedure Video cable connectionOne-Touch Video Play Automatic Selection of the TV Input ModeAutomatic Power On/Off One-Touch DVD PlayOperating Audio Components Sound AdjustmentOperating JVC’s Audio/Video Components TunerCD changer CD playerCassette deck CD recorderOperating JVC’s Audio/Video Components Operating Video ComponentsDVD player Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerGeneral Precaución para la línea de la red CA
Related manuals
Manual 87 pages 40.56 Kb

RX-5032VSL specifications

The JVC RX-5032VSL, RX-6032VSL, and RX-6030VBK are notable components in the realm of audio receivers, each delivering impressive features tailored for home entertainment enthusiasts. These models, known for their durability and superior sound quality, embody the innovation associated with JVC’s long-standing reputation in the audio-video industry.

Starting with the JVC RX-5032VSL, this receiver is a powerhouse with a robust output that can effectively drive speakers in mid-sized to large rooms. It incorporates a built-in FM/AM tuner, allowing users to enjoy their favorite radio stations seamlessly. The RX-5032VSL supports multiple audio formats, offering a range of connectivity options such as RCA inputs and outputs, making it versatile for connecting to various devices like CD players, turntables, and televisions. Its user-friendly interface is complemented by an intuitive remote control, making it easy to navigate settings and adjust volume levels.

Next in line is the JVC RX-6032VSL, which takes performance a notch higher. This model features enhanced power output, ensuring that even the most demanding audio scenarios are handled with grace. One of its standout characteristics is the incorporation of Dolby Digital technology, which expands the listening experience into a multi-channel audio setup, perfect for movie buffs and music lovers alike. In addition, the RX-6032VSL provides a variety of tuning presets, allowing users quick access to their preferred radio stations. The receiver also boasts superior thermal protection, ensuring reliability during extended use.

Lastly, the RX-6030VBK is tailored for those seeking a balance of quality and affordability. This model is designed with a sleek aesthetic that can fit seamlessly into any home décor while maintaining the high-performance standards JVC is known for. The RX-6030VBK includes a range of inputs including HDMI ports, which can facilitate digital video and audio connections, catering to modern home theater setups. It also features direct digital circuitry and a sophisticated equalizer for customized audio playback, enabling users to fine-tune their listening experience based on personal preferences.

Each of these JVC models showcases advanced audio technology combined with user-friendly features. They are designed to enhance both music enjoyment and movie watching, creating an immersive experience that appeals to a wide range of users, from casual listeners to audiophiles. Whether you select the RX-5032VSL, RX-6032VSL, or RX-6030VBK, JVC offers sound solutions that promise reliability, performance, and versatility for any home audio setup.
Top Page Image Contents