JVC RX-5032VSL manual Specifications, Amplifier

Page 36

English

Specifications

Designs & specifications are subject to change without notice.

 

Amplifier

Output Power:

At Stereo operation:

 

 

Front channels:

100 W* per channel, min. RMS, driven into 8 Ω at 1 kHz with no

 

 

more than 0.9% total harmonic distortion. (IEC268-3/DIN)

 

At Surround operation:

 

 

Front channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz with no

 

 

more than 0.8% total harmonic distortion.

 

Center channel:

100 W, min. RMS, driven into 8 Ω at 1 kHz, with no more than

 

 

0.8% total harmonic distortion.

 

Surround channels:

100 W per channel, min. RMS, driven into 8 Ω at 1 kHz, with no

 

 

more than 0.8% total harmonic distortion.

 

(* Measured on AC 110 V, 127 V, 220 V, and 240 V)

Audio

 

 

 

Audio Input Sensitivity/Impedance (1 kHz):

CD, TAPE/CDR, VCR, TV SOUND, DVD:

220 mV/47 kΩ

Audio Input (DIGITAL IN)* :

Coaxial:

DIGITAL 1 (DVD):

0.5 V (p-p)/75 Ω

 

Optical:

DIGITAL 2 (CD):

–21 dBm to –15 dBm (660 nm ±30 nm)

 

* Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround

 

(with sampling frequency—32 kHz, 44.1 kHz, 48 kHz).

Audio Output Level:

TAPE/CDR, VCR:

 

220 mV

Signal-to-Noise Ratio (’66 IHF/DIN):

CD, TAPE/CDR, VCR, TV SOUND, DVD:

87 dB/67 dB

Frequency Response (8 Ω):

CD, TAPE/CDR, VCR, TV SOUND, DVD:

20 Hz to 20 kHz (±1 dB)

Tone Control:

Bass (100 Hz):

 

±10 dB

 

Treble (10 kHz):

 

±10 dB

Video

 

 

 

Video Input Sensitivity/Impedance:

 

 

 

Composite video:

DVD, VCR:

 

1 V (p-p)/75 Ω

Video Output Level/Impedance:

 

 

 

Composite video:

VCR, MONITOR OUT:

1 V (p-p)/75 Ω

Synchronization:

Negative

 

 

Signal-to-Noise Ratio:

45 dB

 

 

33

Page 35 Page 37
Image 36
Page 35 Page 37
Contents RX-5032VSL STANDBY/ON Precaución -- Interruptor STANDBY/ONPrecaución Ventilación Adecuada Before Installation PrecautionsChecking the Supplied Accessories Setting the Voltage Selector SwitchTable of Contents Parts Identification Front PanelDisplay Remote Control Rear PanelOutput TAPE/CDR OUT, VCR OUT Connecting the AM and FM Antennas Getting StartedAM antenna connection FM antenna connectionConnecting the Speakers and Subwoofer Connection diagram Speaker layout diagramHow to connect speaker cords How to connect the subwooferConnecting Audio/Video Components Getting StartedAnalog Connections Audio component connections If your audio components have a Compu Link jackVideo component connections VCRDVD To use software encoded with Dolby Digital or DTSConnecting the Power Cord Putting Batteries in the Remote ControlPlug the power cord into an AC outlet Replace the coverTurning On the Power Basic OperationsSelecting the Source to Play Adjusting the Volume Basic OperationsSelecting Different Sources for Picture Sound Press Speakers ON/OFF on the front PanelTurning Off the Power With the Sleep Timer Basic adjustment auto memory For recordingTurning Off the Sound Temporarily-Muting Changing the Display BrightnessBasic Settings Basic Settings Using Multi JOG DialSelecting the Digital Input Terminals Crossover frequency-CROSSOVERLow Frequency Effect attenuator-LFE Attenuate Dynamic range compression-DCOMPRESSIONBasic Settings Selecting the Analog or Digital Input ModeSelect digital input mode Press Input DigitalSound Adjustments To turn on the subwoofer, press the button againSound Adjustments Sound Adjustments Using Multi JOG DialPress Adjust Turn Multi JOG dial to select an Appropriate valueSound Adjustments Using Remote Control Adjusting Speaker Output Levels Using Test TonePress Sound Select a speaker you want to adjust Adjusting Subwoofer Output LevelPress Test Press SOUND, then press Test to stop the test toneSetting the AM Tuner Tuning in to Stations ManuallyUsing Preset Tuning Tuner OperationsSelecting the FM Reception Mode Tuning in to a Preset Station On the front panelTo erase a stored preset station, store a new station on a Tuner OperationsCreating Realistic Sound Fields Surround modesDSP modes Typical multi-channel 5.1 channel reproductionCreating Realistic Sound Fields Creating sound fieldAll Channel Stereo reproduction HallUsing Surround Modes Select the source you want to listen to and start playingPress Surround Dolby DigitalUsing DSP Modes Signal and speaker indicators on the displayAdjustable items and selected Surround/DSP mode To adjust the speaker output level and the effect level forCompu Link Remote Control System Press the play 3 button on the CD playerAutomatic Source Selection Synchronized RecordingAV Compu Link Remote Control System Connecting procedureAV Compu Link connection Video cable connectionAutomatic Selection of the TV Input Mode Automatic Power On/OffOne-Touch Video Play One-Touch DVD PlaySound Adjustment Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD player Cassette deckCD changer CD recorderOperating JVC’s Audio/Video Components Operating Video ComponentsDVD player Troubleshooting Problem Possible Cause SolutionSpecifications AmplifierFM tuner IHF AM tunerGeneral Precaución para la línea de la red CA
Related manuals
Manual 87 pages 40.56 Kb

RX-5032VSL specifications

The JVC RX-5032VSL, RX-6032VSL, and RX-6030VBK are notable components in the realm of audio receivers, each delivering impressive features tailored for home entertainment enthusiasts. These models, known for their durability and superior sound quality, embody the innovation associated with JVC’s long-standing reputation in the audio-video industry.

Starting with the JVC RX-5032VSL, this receiver is a powerhouse with a robust output that can effectively drive speakers in mid-sized to large rooms. It incorporates a built-in FM/AM tuner, allowing users to enjoy their favorite radio stations seamlessly. The RX-5032VSL supports multiple audio formats, offering a range of connectivity options such as RCA inputs and outputs, making it versatile for connecting to various devices like CD players, turntables, and televisions. Its user-friendly interface is complemented by an intuitive remote control, making it easy to navigate settings and adjust volume levels.

Next in line is the JVC RX-6032VSL, which takes performance a notch higher. This model features enhanced power output, ensuring that even the most demanding audio scenarios are handled with grace. One of its standout characteristics is the incorporation of Dolby Digital technology, which expands the listening experience into a multi-channel audio setup, perfect for movie buffs and music lovers alike. In addition, the RX-6032VSL provides a variety of tuning presets, allowing users quick access to their preferred radio stations. The receiver also boasts superior thermal protection, ensuring reliability during extended use.

Lastly, the RX-6030VBK is tailored for those seeking a balance of quality and affordability. This model is designed with a sleek aesthetic that can fit seamlessly into any home décor while maintaining the high-performance standards JVC is known for. The RX-6030VBK includes a range of inputs including HDMI ports, which can facilitate digital video and audio connections, catering to modern home theater setups. It also features direct digital circuitry and a sophisticated equalizer for customized audio playback, enabling users to fine-tune their listening experience based on personal preferences.

Each of these JVC models showcases advanced audio technology combined with user-friendly features. They are designed to enhance both music enjoyment and movie watching, creating an immersive experience that appeals to a wide range of users, from casual listeners to audiophiles. Whether you select the RX-5032VSL, RX-6032VSL, or RX-6030VBK, JVC offers sound solutions that promise reliability, performance, and versatility for any home audio setup.
Top Page Image Contents