Marantz SR6001 manual Multi Room Setup, DC Trigger Setup

ENGLISH

5-1 MULTI ROOM SETUP

The SR6001 has source selectors, sleep timers and multispeaker output remote control units for the other rooms in the multi room system.

These features can be set from this menu.

1. Select “5. PREFERENCE” from the MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “MULTI ROOM SETUP” with the 3 or 4 cursor buttons.

3. Press the ENTER button to enter the setting.

The following explanation shows how to operate MULTI ROOM of the multi-room system.

MULTI ROOM SETUP

AUDIO : DVD

SLEEP :OFF

MONO/ST:STEREO

MULT:OFF		MSPK:
VOL	:VARI	VOL	:
LEV	: - 90dB	LEV	:
RETURN BACK			EXIT

4. Select the desired item with the 3 or 4 cursor button.

AUDIO:

Select the audio source of the multiroom output with the 1 or 2 cursor buttons.

SLEEP:

The sleep mode is available when the multiroom is active, set the time with 1 or 2 cursor buttons. The sleep timer can be set to a maximum 90 minutes in 10 minute increments.

MONO/ST:

This mode switches audio output to the multi room system between MONAURAL and STEREO, using the 1 and 2 cursor buttons.

MULTI (MULTI ROOM):

Switch the multiroom output “ON” or “OFF” with the 1 or 2 cursor buttons.

MSPK (MULTI SPEAKER):

Switch the speaker output “ON” or “OFF” with the 1 or 2 cursor buttons.

VOL (VOLUME SETUP):

Select whether the multiroom or multi speaker output level is variable or fi xed with the 1 or 2 cursor buttons.

LEVEL (VOLUME LEVEL):

Adjust the multiroom output level with the 1 or 2 cursor buttons. The volume can be set between -90 dB and 0 dB in 1 dB increments.

Note:

•This setting can be changed when the SURR B is set to “NONE” in the SPEAKER SIZE menu and “SPEAKER C” is in the OFF position on the rear panel. When this setting is unavailable, “***” is displayed.

•If “VOLUME” is set to “FIXED”, the multiroom output level cannot be adjusted from the A or B room.

5-2 DC TRIGGER SETUP

This unit has DC trigger control jack, which is linked with input functions of main room or multiroom, and controls DC trigger output.

Each trigger can be setup separately.

1. Select “5. PREFERENCE” from MAIN MENU with the 3 or 4 cursor buttons and press the ENTER button.

2. Select “DC TRIGGER SETUP” with the 3 and 4 cursor buttons.

3. Press the ENTER button to enter the selection.

DC TRIGGER SETUP

DC TRIG: DISABLE

TV : TAPE :

DVD : CD/R :

VCR : AUX2 :

DSS : TUNER :

AUX1 : 7 . 1CH :

RETURN NEXT EXIT

4. You can select “MAIN ROOM”, “MULTI ROOM”, “REMOTE” or “DISABLE” with the 1 or 2 cursor buttons.

Note:

•REMOTE is available for the external control. The RC5001SR cannot operate the function.

5.Select desired input source with the 3 or 4 cursor buttons.

6.Set to “ON” or “OFF” with the 1 or 2 cursor buttons.

7.After you complete this portion of the setup, move the cursor to “RETURN” with the 3 or 4 cursor button and press the ENTER button.

Note:

•When an input source that is on in the set room is selected, voltage is output to the DC TRIGGER output terminal.

40