Marantz SR6001 manual Basic Operation, Selecting the Surround Mode, Selecting AN Input Source

BASIC OPERATION

SELECTING THE SURROUND MODE ADJUSTING THE MAIN VOLUME

ADJUSTING THE TONE (BASS & TREBLE)

CONTROL

(PLAY BACK)

SELECTING AN INPUT SOURCE

Before you can listen to any input media, you must first select the input source on the SR6001.

Example: AUTO SURROUND

SOURCE	SET	OFF	ON
l/				SURROUND
AV SURROUND RECEIVER SR6001				DIGITAL
SLEEP	DISPLAY	P.DIRECT	SURROUND	AAC
			LIP SYNC/
AUTO	2	dts	INPUT
1		3	BAND
CS	EX/ES	VIRTUAL	T.MODE

4 5 6

	7.1CH IN	A/D	HT-EQ
CL	0	+10	MEMO
CH/ CAT	SPKR A/B	MUTE	VOLUME
	MULTI/ CAT	M-SPKR
INFO			MENU

- PRESET +		- TUNING +
DISC+	ANGLE	SUB TITLE	AUDIO
CH-SEL V-OFF		ATT.
	BASS	TREBLE
TV	DVD	VCR	DSS
TUNER	CD	CDR	MD

ENGLISH

Example : DVD

AV SURROUND RECEIVER SR6001	DISC+	ANGLE	SUB TITLE	AUDIO
	CH-SEL V-OFF		ATT.
		BASS	TREBLE
	TV	DVD	VCR	DSS
	TUNER	CD	CDR	MD
	TAPE	AUX1	AUX2	AMP

REMOTE CONTROLLER

RC5001SR

To select DVD, turn the INPUT SELECTOR knob on the front panel or press the DVD button on the remote two times in a row. After you have selected DVD, simply turn on the DVD player and play the DVD.

• As the input source is changed, the new input

name will appear momentarily an OSD information

on the video display. The input name will also

appear in the display, on the front-panel.

M-CH ST STEREO NIGHT P.SCAN

TUNER CD CDR MD

TAPE AUX1 AUX2 AMP

REMOTE CONTROLLER

RC5001SR

(Using the SR6001)

To select the Auto surround mode during playback, press the AUTO button on the front panel.

(Using the remote control unit)

To select the Auto surround mode, press the AMP button first to enter the AMP mode then press the AUTO button.

•For surround modes, see “Surround Mode” on page 45.

•To select a specifi c surround mode, Press the individual surround mode button on page 9 on the remote control unit.

ENTER

Adjust the volume to a comfortable level using the VOLUME control knob on the front panel or VOLUME + / – buttons on the remote.

To increase the volume, turn the VOLUME knob clockwise or press VOLUME + button on the remote, to decrease the volume, turn counterclockwise or press VOLUME – button on the remote.

Notes:

•The volume can be adjusted within the range of – ∞ to 18 dB, in steps of 1 dB.

•However, when the channel level is set as described on page 36, if the volume for any channel is set at +1 dB or greater, the volume cannot be adjusted up to 18 dB.

(In this case the maximum volume adjustment range is “18 dB - Maximum value of channel level)

TAPE AUX1 AUX2 AMP

REMOTE CONTROLLER

RC5001SR

During a listening session you may wish to adjust the Bass and Treble Control to suit your listening tastes or room acoustics.

(Using the remote control unit)

To adjust the bass effect, press BASS+ or BASS–. To adjust the treble effect, TREBLE+ or TREBLE–.

Notes:

•The tone control function is unavailable for the Source Direct, Pure Direct, Dolby Headphone, Dolby Virtual Speaker and 192kHz PCM.

•The tone control function is not available when ACOUSTIC EQ is used.

•	If you use the FUNCTION RENAME feature (see
	page 29) , the renamed name appears on the
	display.
• As the input is changed, the SR6001 will
	automatically switch to the digital input, surround
	mode, attenuation, and night mode status which
	were entered during the configuration process for
	that source.
•	When an audio source is selected, the last
	video input used remains routed to the VCR &
	DSS Outputs and Monitor Output. This permits
	simultaneous viewing and listening to different
	sources.
•	When a video source is selected, the selected
	video signal is output from the MONITOR OUT
	terminal.

NIGHT MODE

		LIP SYNC/
AUTO	dts	INPUT

1	2	3	BAND
CS	EX/ES	VIRTUAL	T.MODE
4	5	6
M-CH ST	STEREO	NIGHT	P.SCAN
7	8	9
	7.1CH IN	A/D	HT-EQ
CL	0	+10	MEMO
CH/ CAT	SPKR A/B	MUTE	VOLUME

(Using the remote control unit)

Press the NIGHT button to turn on the Night mode. Setting the Night mode to “ON” compresses the dynamic range in Dolby Digital only.

This softens loud passages such as sudden explosions, to help prevent disturbing others late at night. To turn off the Night mode, Press the NIGHT button again.

DIALOGUE NORMALIZATION MESSAGE

Dialogue Normalization (Dial Norm) is a feature of Dolby Digital.

When playing back software which has been encoded in Dolby Digital, sometimes you may see a brief message on the FL display which will read "D- NORM" (X being a numeric value).

Dialogue Normalization serves to let you know if the source material has been recorded at a higher or lower level than usual. For example, if you see the following message: "D-NORM + 4 dB" on the FL display, to keep the overall output level constant just turn down the volume control by 4 dB. In other words, the source material that you are listening to has been recorded 4 dB louder than usual.

If you do not see a message on the FL display, then no adjustment of the volume control is necessary.

43